Panasonic Kx Tg2352 Operating Instructions Manual

Call Share
This feature allows the handset to join the existing external call. A handset
user can join another handset user’s conversation.
To join a conversation (Call Share)
Press or .
•A maximum of three parties including the outside party can join a conversation, if
all other extensions are not being used. 
Ex. While the handset is engaged in an external call, another handset can join the 
conversation. In that event, the 3rd handset or the base unit cannot operate.
41For assistance, please call:...

42
Voice Mail Service
Voice mail service is an electronic on-line answering system offered by
your telephone company. After subscribing, the voice mail system can
answer calls automatically for you when your line is busy or if calls are not
answered, and caller can leave their messages at the voice mail box
virtually located at the telephone company. After the voice mail box has
received messages, “Voice mail” will be displayed on the handset.
To use this feature, you must first store your access...

43For assistance, please call: 1-800-211-PANA(7262)
*For quick access to your voice mail box, you may add pauses between your
voice mail box access number and your mail box password in step 5.
EX. 1-222-333-4444 PPPP 8888
Your voice mail box access number  Your mail box password
Pauses
Pressing (PAUSE/REDIAL)once creates a 3.5 second delay and counts as
one digit. The delay time depends on a telephone company.
1
Press (MUTE/FUNCTION).
2
Scroll to “Initial set” by pressing Öor
Ñ, and press á. 
3
Scroll to...

1
Press (MUTE/FUNCTION)and scroll to
“Initial set” by pressing 
Öor Ñ, and
press 
á. 
2
Scroll to “Voice mail” by pressing Öor
Ñ, and press á.
3
Press áat “VM tone detect”.
•The current setting is displayed.
4
Select “On” or “Off” by pressing Öor Ñ.
5
Press á(Savekey).
•A beep sounds.
•To exit the programming mode, press (OFF).
•You can exit the programming mode any time by pressing (OFF).
44
VM tone detect
:On
GF H=Save
VM tone detect
:On
Voice Mail Service
Setting the Voice Mail (VM) Tone Detection...

45For assistance, please call: 1-800-211-PANA(7262) •If “Voice mail” still remains on the handset even if you have listened to your
voice mail message(s), press (MUTE/FUNCTION), and press and hold
(HOLD/INTERCOM/CLEAR)until the unit beeps. “Voice mail” will disappear.
•If your voice mail service uses a voice mail tone and the recorded message is
over 3 minutes long, “Voice mail” may not be displayed.
•If your voice mail service uses a voice mail tone, the tone will be heard from any
parallel connected...

46
Temporary Tone Dialing
(For Rotary or Pulse Service Users)
Press (*)before entering access numbers which require tone dialing.
•The dialing mode changes to tone. You can enter numbers to access an
answering service, electronic banking service, etc. When you hang up, the mode
will return to pulse.
Muting Your Conversation
Press(MUTE/FUNCTION)while talking.
•The display on the right will be shown.
•The other party cannot hear your voice but you can hear theirs.
•To release the mute,...

47For assistance, please call: 1-800-211-PANA(7262)
For Call Waiting Service Users
Press (FLASH/CALL!WAIT)if you hear a call-waiting tone while talking.
•The first call is put on hold and you can answer the second call.
•To return to the first caller, press 
(FLASH/CALL!WAIT)again.
•The call waiting service cannot be used when:
— the first call is placed on hold, or
— a parallel connected telephone is in use.
•If this function does not operate properly, consult your telephone company for
details.
Call...

48
Special Features
FLASH Button
Pressing (FLASH/CALL!WAIT)allows you to use special features of your
host PBX such as transferring an extension call or accessing special
telephone services (optional) such as call waiting. 
•Pressing (FLASH/CALL!WAIT)causes to disable the Temporary Tone Dialing
mode or the mute (p. 46).
Selecting the flash time
The flash time depends on your telephone exchange or host PBX. 
You can select the following flash times: “700, 600, 400, 300, 250, 110,
100 or 90 ms...

Ringer Tone
You can select the handset ringer tone out of 6 patterns for external calls.
When an external call is being received, the handset will ring in the
selected tone. Your phone comes from the factory set to “1”.
Make sure the unit is not being used and the handset is lifted off the base unit.
1
Press (MUTE/FUNCTION).
2
Scroll to “Ringer setting” by pressing
Öor Ñ, and press á.
3
Scroll to “Ringer tone” by pressingÖor
Ñ, and press á.
•The current setting will be displayed.
4
Select the desired...

50
Wall Mounting
This unit can be mounted on a wall phone plate.
2
Press the tabs in the direction of the
arrows (#), then remove the wall
mounting adaptor ($).
3
Connect the AC adaptor. Tuck
the telephone line cord inside
the wall mounting adaptor, then
push it in the direction of the
arrow (#and $).
•The word “UP WALL” should face
upward.
1
Push the hook and turn it around.
Turn the hook until a click is heard.
2
11
Base unit
12
2
To Power
Outlet