Panasonic Kx Tg2352 Operating Instructions Manual

11
Preparation
For assistance, please call: 1-800-211-PANA(7262)
Optional Headset
H
Plugging a headset into the handset allows a hands-free phone
conversation. Please use only the Panasonic KX-TCA88 headset. To
order, call the accessories telephone number on page 2.
Connecting the optional headset to the handset
Open the headset jack cover, and connect the optional headset to the
headset jack as shown below.
To switch to the speakerphone while using the headset:
Press  . To return to the headset, press...

12
Programmable Settings
How to select a function item from the menu
Make sure the unit is not being used and the handset is lifted off the
base unit.
1. Press 
(MUTE/FUNCTION). 
•The main menu is displayed (p. 13).
2. You can scroll through the menu by pressing
Öor Ñ. Scroll to the desired item by
pressing 
Öor Ñ.
3. Press 
áto select the item.
4. If the item has a sub-menu I, it will be
displayed. Select the sub-menu item by
pressing 
Öor Ñ, and press á.
If the sub-menu Iitem has the sub-menu II, it...

13
Preparation
For assistance, please call: 1-800-211-PANA(7262)
Useful information:
•“---------------” indicates the beginning or the end of the function menu.
•You can go back to the previous display by pressing Üexcept when entering
characters or numbers. To return to the main menu from the sub-menu Ior sub-
menu II, press Ü.
•You can exit the programming mode any time by pressing (OFF).
•If you do not press any buttons for 60 seconds, the handset will exit the
programming mode.
•If the unit detects a...

14
Dialing Mode
If you have touch tone service, set to “Tone”. If rotary or pulse service is
used, set to “Pulse”. Your phone comes from the factory set to “Tone”.
Make sure the unit is not being used and the handset is lifted off the
base unit.
1
Press (MUTE/FUNCTION).
2
Scroll to “Initial set” by pressing Öor
Ñ.
3
Press á.
4
Scroll to “Set tel line” by pressing Ö
or Ñ.
5
Press á.
6
Press áat “Set dial mode”.
•The current setting is displayed.
7
Select “Pulse” or “Tone” by pressing Öor
Ñ.
8
Press...

15
Preparation
For assistance, please call: 1-800-211-PANA(7262)
Line Mode
If the line is connected to a low voltage system such as a PBX, set to “B”.
Your phone comes from the factory set to “A”. 
Make sure the unit is not being used and the handset is lifted off the
base unit.
1
Press (MUTE/FUNCTION).
2
Scroll to “Initial set” by pressing Öor
Ñ,and press á.
3
Scroll to “Set tel line” by pressing Ö
or Ñ.
4
Pressá.
5
Scroll to “Set line mode” by pressing Ö
or Ñ.
6
Press á.
•The current setting is...

16
Auto Talk Feature
The Auto Talk feature allows you to answer a call by lifting the handset off
the base unit or the charger without pressing  or  . If you want to
use this feature, turn the feature ON by programming. Your phone comes
from the factory set to OFF.
Make sure the unit is not being used and the handset is lifted off the
base unit.
1
Press (MUTE/FUNCTION).
2
Scroll to “Initial set” by pressing Öor
Ñ.
3
Press á.
4
Scroll to “Auto talk” by pressing Öor
Ñ.
5
Press á.
•The current setting is...

17
Preparation
For assistance, please call: 1-800-211-PANA(7262)
Ringer volume
Low High
GF H=Save
Ringer volume
Low High
Ringer Volume
You can program the handset ringer volume to HIGH, MEDIUM, LOW or
OFF. If set to OFF, the handset will not ring for external calls, and for
internal calls it will ring at the LOW level. Your phone comes from the
factory set to HIGH.
Make sure the unit is not being used and the handset is lifted off the
base unit.
1
Press (MUTE/FUNCTION).
2
Scroll to “Ringer setting” by...

18
LCD Contrast
You can program the handset LCD contrast (6 levels). Your phone comes
from the factory set to level 3.
Make sure the unit is not being used and the handset is lifted off the
base unit.
1
Press (MUTE/FUNCTION).
2
Scroll to “Initial set” by pressing Öor
Ñ, and press á.
3
Press áat “LCD contrast”.
4
Select the desired contrast by pressing Ö
or Ñ.
•Each time you press Öor Ñ, the LCD
contrast will change. 
•The number of steps shows the LCD
contrast level.
5
Press á(Savekey).
•A beep sounds....

2Handset:
#Press á.
$Wait until a long beep sounds and the
display shows the registered number.
The registration will be then complete.
•The registered number “[1]”to“[3]” is shown 
on the top right of the display.
19
Preparation
For assistance, please call: 1-800-211-PANA(7262)
Registration for Additional Handsets
KX-TG2352WKX-TGA230B
OR
KX-TGA230W
KX-TG2352W includes two handsets with the base unit. You can expand
the system by adding up to 1 optional handset to the system. A maximum
of 3 handsets can...

20
Making Calls
(OFF)
Microphone 
(PAUSE/REDIAL) (HOLD/INTERCOM/CLEAR)
Display Receiver
Back side
Speaker
1
Press .
2
Dial a phone number.
•The dialed number is displayed.
•After a few seconds, the display will show the
length of the call and the battery strength.
3
To hang up, press (OFF)or place the 
handset on the base unit or the charger.
•When a handset is engaged in an outside call, “Line in use” is shown on the
display of other handsets.
Talk
Talk
1112222
Talk
00-00-00
Off
00-01-08
•You can stop...