Panasonic Kx Tg2352 Operating Instructions Manual

21
Basic Operation
For assistance, please call: 1-800-211-PANA(7262)
To have a hands-free phone conversation
(Using Digital Duplex Speakerphone)
1
Press .
2
Dial a phone number.
•The dialed number is displayed.
•After a few seconds, the display will show the
length of the call and the battery strength.
3
When the other party answers, talk into the
microphone.
4
To hang up, press (OFF)or place the 
handset on the base unit or the charger.
Hands-free Digital Duplex Speakerphone
For best performance, please...

22To dial after confirming the entered number
1
Dial a phone number.
•If you misdial, press 
(HOLD/INTERCOM/CLEAR). One digit is
erased. Dial the correct phone number.
•To cancel, press 
(OFF).
2
Press .
OR
To have a hands-free phone conversation,
press  , and when the other party
answers, talk into the microphone.
•After a few seconds, the display will show the
length of the call and the battery strength.
3
To hang up, press (OFF)or place the
handset on the base unit or the charger.
To redial the last...

23
Basic Operation
For assistance, please call: 1-800-211-PANA(7262)
To put a call on hold
Press (HOLD/INTERCOM/CLEAR)twice.
•The IN USE/HOLD indicator light flashes, “Hold” is
displayed and the call is put on hold.
•To transfer the call to another handset, see page 40.
•If a call is kept holding for 6 minutes, an alarm tone will start to sound. After 4
additional minutes on hold the call will be disconnected. 
•When you put on hold the call, “Line on hold” is shown on the display of other
handsets.
To...

When a call is received, the unit rings and “Incoming call” is displayed
on the handset and the IN USE/HOLD indicator flashes quickly on the
base unit. 
If you subscribe to a Caller ID service, the calling party information will be
displayed after the first ring (p. 25). In order to view the Caller ID
information, please wait until the second ring to answer a call.
1
Press .
•You can also answer a call by pressing any
dialing button (0)to (9), (*)or (#)(Any Key Talk).
OR
Press  , and when the other party...

25
Basic Operation
For assistance, please call: 1-800-211-PANA(7262)
Caller ID Service
This unit is compatible with a Caller ID service offered by your telephone
company. If you subscribe to a Caller ID service, the calling party’s
information will be shown on the handset after the first ring.
The handset can record information of up to 30 different callers, including
the time and date received and the number of times called, in the Caller
List. The Caller List information is sorted by the most recent to...

1
Press Öor Ñto enter the Caller List.
•The display will show, for example, the
following.
2
To search from the most recent call, 
press 
Ö.
To search from the oldest call, press 
Ñ.
•To scroll between callers, press Öor Ñ.
3
To exit the list, press (OFF).
26
Using the Caller List
Caller list
2 new calls
GF H=Directory
SMITH,JACK 
1-222-333-4444
3:10P JUN10 
•If “No items stored” is displayed, the Caller List is empty.
•
If there is no name information for a caller, the display will only show the phone...

27
Basic Operation
For assistance, please call: 1-800-211-PANA(7262)
TURNER,CINDY 
1-234-456-7890
11:20A JAN12 
✕3
What “√” means
When the display shows “√”, you have already
viewed this calling information, answered the call
or called back the caller. If the same caller calls
again, the call entry with “√” will be replaced with
the new call entry.
If a caller calls more than once
The number of times the same caller called is
displayed (✕2 to ✕9). The date and time of the
most recent call will be...

28
Make sure the unit is not being used and the handset is lifted off the
base unit.
1
Press Öor Ñto enter the Caller List.
2
Scroll to the desired caller by pressing
Öor Ñ.
3
Press á.
4
Press á(Yeskey) at “Edit”.
5
Press á(Editkey) to select a
pattern.
•Each time you press á, the number is
rearranged into one of 3 patterns.
a
b– 
c1 –  – 
•The order in which patterns a–c
are displayed depends on how 
the telephone number is displayed in step 2.
6
After editing the number, you can continue with calling...

Make sure the unit is not being used and the handset is lifted off the base unit.
1. Press (MUTE/FUNCTION).
2. Scroll to “Initial set” by pressing Öor Ñ,
and press 
á.
3. Scroll to “Caller ID edit” by pressing
Öor Ñ,and press á.
4. Select “On” or “Off” 
by pressingÖor Ñ.
5. Press 
á(Savekey).
•A beep sounds.
•To exit the programming mode, press (OFF).
•When the feature is set to OFF, the unit will still be able to display Caller ID, like
regular Caller ID telephone, but the in-coming Caller ID number...

30
Storing Caller List Information in the Directory
You can store phone numbers that are in the Caller List into the directory. 
Make sure the unit is not being used and the handset is lifted off the
base unit.
1
Press Öor Ñto enter the Caller List.
2
Scroll to the caller you want to store in
the directory by pressing 
Öor Ñ, and
press 
á.
•If the number requires editing, see page 28.
3
Scroll to “Save directory” by pressing
Öor Ñ, and press á.
•A beep sounds.
•
To continue storing other items, repeat...