Panasonic Kx Tg2346 Operating Instructions Manual

Useful Information
For assistance, please call: 1-800-211-PANA(7262)61
Optional Headset
Connecting an optional headset to the handset allows hands-free phone 
conversation. Please use only a Panasonic KX-TCA60, KX-TCA86, KX-TCA88, 
KX-TCA88HA, KX-TCA91, KX-TCA92, or KX-TCA98 headset. To order, call the 
accessories telephone number on page 2.
Connecting an optional headset
Open the headset jack cover, and insert the headset plug into the headset jack as 
shown below. 
• Headset sold separately. Model...

62
Direct Commands
After pressing [MENU], you can also program menu items directly by pressing ([0] 
to [9], [*] and [#]) instead of using the soft keys.
Menu item Command Selection items Page
Ringer volume[1] [1]  [0] : Off  [1] : Low  [2] : Medium   
[3] : Highp. 17
Ringer tone 
(for handset)[1] [2] [1]–[3] :Tone pattern 1–3 
[4]–[7] : Melody pattern 1–4
[8]–[9] : Downloaded melody 
pattern 1–2 *
1
p. 18
Incoming call tone 
(for handset)[1] [3]  [1] : On  [2] : Twice  [0] : Off p. 46
Message play[2]p....

For assistance, please call: 1-800-211-PANA(7262)63
Direct Commands
Useful Information
During programming:
When “Save” is displayed, press the right soft key to save the new settings.
To exit programming, press [OFF].
• If you press the direct command incorrectly, press [OFF], then re-enter 
programming mode by pressing [MENU].
• For function details, see the corresponding pages.
*
1You need to first download melody data from the openLCR web site.
*2Can be used to activate Caller IQ. See the leaflet...

64
If the Following Appear on Your Display...
The following will be displayed when the unit needs your attention.
Display message Cause & Remedy
Recharge battery• The battery needs to be charged. Recharge the 
battery (p. 10).
Charge for 6h• The battery has been discharged. The handset will 
not work. Fully charge the battery (p. 10).
No link to base.
Move closer to 
base, try again.• The handset has lost communication with the base 
unit. Walk closer to the base unit and try again or 
re-register the...

Useful Information
For assistance, please call: 1-800-211-PANA(7262)65
Troubleshooting
If the handset display shows error messages, see “If the Following Appear on 
Your Display...” (p. 64) for the Cause & Remedy.
Telephone System
Problem Cause & Remedy
“No link to base. Move 
closer to base, try 
again.” is displayed and an 
alarm tone sounds.• You are too far from the base unit. Walk 
closer to the base unit.
• Confirm the base unit’s AC adaptor is 
plugged in.
• Raise the base unit antenna.
• If the...

Troubleshooting
66
You cannot redial. • If the last number dialed was more than 
48 digits long, the number will not be redialed 
correctly.
You cannot make long 
distance calls.• Please make sure you have long distance 
service.
• Check if Caller IQ is on. Turn Caller IQ off 
(p. 70).
The handset does not display 
the caller’s name and/or 
phone number.• You need to subscribe to Caller ID.
• Other telephone equipment may be 
interfering with your phone. Disconnect it and 
try again.
• Other electrical...

For assistance, please call: 1-800-211-PANA(7262)67
Troubleshooting
Useful Information
Answering System  
The Ringer/Message Alert 
indicator flashes slowly when 
the handset is not ringing and 
in use.• The Message Alert is turned on and new 
messages have been recorded. Turn the 
Message Alert off (p. 24) or listen to the new 
messages (p. 50, 51, 55).
You cannot have a 
conversation using the 
headset.• Make sure the optional headset is connected 
properly (p. 61).
• If “SP-phone” is displayed on the...

Troubleshooting
68
General 
When you play back 
messages or turn on the 
Answering System, the 
handset and/or base unit 
announces the wrong day and 
time.• The date and time may be set incorrectly. Set 
the date and time again (p. 14).
Problem Cause & Remedy
The handset and/or base unit 
does not work.• Check the settings (p. 9 –11).
• Check whether the dialing mode setting is 
correct (p. 15).
• Fully charge the battery (p. 10).
• Clean the charge contacts and charge again 
(p. 11).
• Check battery...

For assistance, please call: 1-800-211-PANA(7262)69
Troubleshooting
Useful Information
openLCR Service for Caller IQ
If you cannot solve your 
problem• Visit our website: 
http://www.panasonic.com/support
• Contact us via the web at:  
http://www.panasonic.com/contactinfo
• Call our customer call center at: 
1-800-211-PANA(7262)
Problem Cause & Remedy
When you try to download the 
data from openLCR, the voice 
prompt is not announced from 
the handset while “Listen & 
follow phone guidance.” 
is being...

70
openLCR Service for Caller IQ
This unit is compatible with services provided by openLCR.
Important:
• If you have any questions regarding the openLCR service, call openLCR’s 
customer service department at 1-866-openLCR(1-866-673-6527).
• NEITHER PANASONIC COMMUNICATIONS CO., LTD. (PCC) NOR 
MATSUSHITA ELECTRIC CORPORATION OF AMERICA (MECA) IS IN ANY 
WAY AFFILIATED WITH, OR RESPONSIBLE FOR THE ACTS OR OMISSIONS 
OF, OPENLCR.COM, INC. (OPENLCR). NEITHER PCC NOR MECA NOR ANY 
OF THEIR EMPLOYEES OR...