Panasonic Kx Tg2314 Operating Instructions Manual

For assistance, please call: 1-800-211-PANA(7262)41
Voice Mail Service
Advanced Operation
Listening to Voice Mail Messages   
The unit will let you know that someone has left new voice mail for you:
a) “Voice Mail” will be displayed on the handset, and
b) the Ringer/Message Alert indicator on the handset will flash slowly if Message 
Alert is turned on (p. 17) and the handset is not in use.
To listen to your voice mail message(s)
• You can also listen to your voice mail message(s) by using [C] or [s].
1....

42
Special Features
Handset Locator 
You can locate the handset or page the handset user with beep tones from the base 
unit.
Te m p o r a r y  To n e  D i a l i n g
(For Rotary or Pulse Service Users) 
Press [*] (TONE) before entering access numbers which require tone dialing.
• The dialing mode changes to tone. You can enter numbers to access an 
answering service, electronic banking service, etc. When you hang up, the dialing 
mode will return to pulse.
Muting Your Conversation 
During a call, you can...

For assistance, please call: 1-800-211-PANA(7262)43
Special Features
Advanced Operation
For Call Waiting Service Users 
Press [FLASH/CALL WAIT] if you hear a call waiting tone during a conversation.
• The first call is put on hold and you can answer the second call.
• To return to the first caller, press [FLASH/CALL WAIT] again.
• Call Waiting service cannot be used when the first call is put on hold.
• If this function does not operate properly, consult your telephone company for 
details.
Call Waiting...

Special Features
44
FLASH Button 
Pressing [FLASH/CALL WAIT] allows you to use special features of your host PBX 
such as transferring an extension call, or accessing optional telephone services 
such as call waiting. 
• Pressing [FLASH/CALL WAIT] cancels Temporary Tone Dialing mode or the 
mute (p. 42).
Selecting the flash time
The flash time required depends on your telephone exchange or host PBX. 
You can select the following flash times: “700, 600, 400, 300, 250, 110, 100 or 
90 ms (milliseconds)”....

For assistance, please call: 1-800-211-PANA(7262)45
Special Features
Advanced Operation
Key Tone 
You can select whether or not the handset keys will sound tones (key tone, 
confirmation tone, error tone). The factory preset is ON. 
Re-registering the Handset 
If “No link to base. Move closer to base, try again.” is displayed 
even when using the handset near the base unit, the handset may have lost 
communication with the base unit. You need to re-register the handset to the base 
unit.
• Have both...

46
Belt Clip
You can hang the handset on your belt or pocket using the included belt clip.
To attach the belt clip To remove the belt clip 
Optional Headset
Connecting an optional headset to the handset allows hands-free phone 
conversation. Please use only a Panasonic KX-TCA60, KX-TCA86, KX-TCA88, 
KX-TCA88HA, KX-TCA91, KX-TCA92, or KX-TCA98 headset. To order, call the 
accessories telephone number on page 2.
Connecting an optional headset
Open the headset jack cover, and insert the headset plug into...

Useful Information
For assistance, please call: 1-800-211-PANA(7262)47
Wall Mounting
This unit can be mounted on a wall phone plate.
Base unit
1
Press the tabs in the direction 
of the arrows (1), then remove 
the wall mounting adaptor (2).
2Connect the AC adaptor.
• Fasten the AC adaptor cord to 
prevent it from being 
disconnected.
 
3Tuck the telephone line cord 
inside the wall mounting 
adaptor, then push the adaptor 
in the direction of the arrows 
(1 and 2) while pressing the 
tabs.
• The word “UP...

Wall Mounting
48
Charger unit
The charger can be wall mounted. Connect the AC adaptor. Install screws using the 
wall template (see below). Mount the charger (1). Slide it down (2), then slide it 
down to the right (3) until it is secured.
Wall Template for the Charger unit
2
3
1
To  P o w e r  
Outlet  Screws 
2.45 cm
(31/32)
2.45 cm
(31/32)
PQQX13989YA.book  48 ページ  ２００４年１月２２日　木曜日　午後５時４分 

Useful Information
For assistance, please call: 1-800-211-PANA(7262)49
Direct Commands
After pressing [MENU], you can also program menu items directly by pressing ([0] 
to [9], and [#]) instead of using the soft keys.
During programming:
When “Save” is displayed, press the right soft key to save the new settings.
To exit programming, press [OFF].
• If you press the direct command incorrectly, press [OFF], then re-enter 
programming mode by pressing [MENU].
• For function details, see the corresponding...

50
If the Following Appear on Your Display...
The following will be displayed when the unit needs your attention.
Display message Cause & Remedy
Recharge battery• The battery needs to be charged. Recharge the 
battery (p. 9).
Charge for 6h• The battery has been discharged. The handset will 
not work. Fully charge the battery (p. 9).
No link to base.
Move closer to 
base, try again.• The handset has lost communication with the base 
unit. Walk closer to the base unit and try again or 
re-register the...