Panasonic Kx Tg2314 Operating Instructions Manual

2.4 GHz Multi-Handset Digital Cordless Phone
Operating Instructions
Model No.  KX-TG2314
Pulse-or-tone dialing capability
The unit is Caller ID compatible. To display the caller’s name and phone number, 
you must subscribe to Caller ID service.
PLEASE READ BEFORE USE AND SAVE. 
Panasonic World Wide Web address:  http://www.panasonic.com
for customers in the USA or Puerto Rico
Charge the battery for 6 hours before initial use.
PQQX13989YA.book  1 ページ  ２００４年１月２２日　木曜日　午後５時４分 

2Thank you for purchasing your new Panasonic cordless 
telephone.
Please read the IMPORTANT SAFETY INSTRUCTIONS on 
page 55 before use. Read and understand all instructions. 
Accessories
 (included)
For extra orders, call 1-800-332-5368.
For hearing or speech impaired TTY users, call 1-866-605-1277. 
Caller ID, Call Waiting and Voice Mail Service, where available, are telephone 
company services. After subscribing to Caller ID this phone will display a caller’s 
name and phone number. Call Waiting Caller...

3For assistance, please call: 1-800-211-PANA(7262)
For Best Performance
Battery Charge
The handset is powered by a rechargeable Nickel-
Metal Hydride (Ni-MH) battery. Charge the battery 
for 6hours before initial use (p. 9). 
Base Unit Location/Noise
Calls are transmitted between the base unit and handset using wireless radio 
waves. For maximum distance and noise-free operation, the recommended 
base unit location is: 
Note:
• If you use the handset near a microwave oven which is being used, noise may...

4
Contents
Location of Controls   . . . . . . .   6
Installation   . . . . . . . . . . . . . . .   8
Connections  . . . . . . . . . . . . .   8
Installing the Battery in the 
Handset  . . . . . . . . . . . . . . .   9
Battery Charge . . . . . . . . . . .   9
Programmable Settings  . . . .   11
Programming Guidelines  . . .   11
Function Menu Table  . . . . .   12
Display Language   . . . . . . .   13
Dialing Mode   . . . . . . . . . . .   13
Line Mode   . . . . . . . . . . . . .   14
Auto Talk  . . . . ....

For assistance, please call: 1-800-211-PANA(7262)5
Contents
Preparation Useful InformationAdvanced Operation Basic OperationBelt Clip  . . . . . . . . . . . . . . . . .  46
Optional Headset   . . . . . . . . .  46
Wall Mounting  . . . . . . . . . . . .  47
Direct Commands  . . . . . . . . .  49
If the Following Appear 
on Your Display...  . . . . . . . .  50
Troubleshooting  . . . . . . . . . .  52
Important Safety 
Instructions  . . . . . . . . . . . . .  55
FCC and Other Information  . .  56
Index   ....

6
Location of Controls
Base unit
Handset 
This unit includes two handsets and one base unit. The included handsets are 
pre-registered at the factory and assigned the extension numbers 1 and 2. 
HANDSET LOCATOR 
[], [] Buttons (p. 42)
Charge Contacts 
(p. 10)Antenna (p. 3)
CHARGE Indicator (p. 9)
IN USE Indicator (p. 21)
Antenna
Display
Receiver
Soft Keys (p. 7)
[OFF] Button (p. 11, 18)
[MENU] Button (p. 11)
Navigator Key
([
d], [B]) (p. 7) Back side
Speaker 
Headset Jack (p. 46)
[C] (TALK) Button (p....

Preparation
For assistance, please call: 1-800-211-PANA(7262)7
Location of Controls
Charger unit
Handset soft keys
• When a function name does not appear above a soft key, the soft key has no 
function.
Handset navigator key
Two soft keys are used to select functions displayed 
directly above each key. Functions displayed above the 
keys will change depending on the state of use.
On this sample display, “(VE)” and “Mute” are 
displayed above soft keys.
Scrolls up [
B] and down [d] the function menu, the...

8
Installation
Connections
Base unit
• Base unit: USE ONLY WITH Panasonic AC ADAPTOR PQLV1 (Order No. 
PQLV1Z).
• The AC adaptor must remain connected at all times. (It is normal for the adaptor to 
feel warm during use.)
• If your unit is connected to a PBX which does not support Caller ID and voice mail 
services, you cannot access those services. 
• The unit will not work during a power failure. We recommend connecting a 
standard telephone to the same telephone line or to the same telephone jack...

Preparation
For assistance, please call: 1-800-211-PANA(7262)9
Installation
Installing the Battery in the Handset
Insert the battery (1), and press it down until it snaps into the compartment (2). 
Close the cover. 
To replace the battery:
Press the notch on the cover firmly and slide it as 
indicated by the arrow. Replace the old battery with a 
new one (p. 10). Close the cover and charge the battery 
for 6 hours.
Battery Charge 
Place the handsets on the base unit and 
charger. Charge for 6hours before...

Installation
10
Recharge
Recharge the battery when: 
—“Recharge battery” is displayed on the handset,
—“7” flashes, or
—the handset beeps intermittently while it is in use.
• The display will continually indicate “Recharge battery” and/or “7” will 
flash when the handset battery is charged for less than 15 minutes and the 
handset is lifted off the base unit or charger.
• If the battery has been discharged, the handset will display “Charge for 6h” 
and “8” when you place the handset on the base unit or...