Panasonic Kx-Td816c, Kx-td1232c Digital Super Hybrid System User Manual

Station Features and Operation (DPT/SLT)
User Manual241

With the KX-T7431, KX-T7433, KX-T7436, or KX-T7235, you can execute this feature 
using the display operation.

This feature is not available for ISDN telephones.
Feature Guide References
EXtra Device Port (XDP)
User Manual References
4.3.3 Alternate Calling — Ring / Voice
4.3.47 Hands-free Answerback [PT only]
4.5.9 KX-T7235 Display Features - System Feature Access Menu
4.5.12 KX-T7431 / KX-T7433 / KX-T7436 Display Features - System Feature...

Station Features and Operation (DPT/SLT)
242User Manual
4.3.67 Phantom Extension
Allows you to route calls to a phantom extension. The call arrives at the extension who has the 
corresponding Phantom button. A flexible CO button can be assigned as the Phantom button. 
The lighting patterns of Phantom button and status are as follows.
Off : Idle
Red : You are calling a phantom extension.
Flashing green rapidly : Incoming call
To call a phantom extension
PT
You may dial the phantom extension number...

Station Features and Operation (DPT/SLT)
User Manual243
To transfer a call to a phantom extension (Screened Call Transfer)
Dial toneRingback tone Confirmation
tone Flash the
hookswitch.
Announce. Wait for
an answer.
During a conversation;
Hang up.
Dial the destination phantom
extension number. 
phantom extension no.
The other party is placed on
consultation hold.
Dial toneConfirmation
tone
The other party is placed on
consultation hold.
The call is transferred.
PT
Ringback tone
Announce. Wait for an...

Station Features and Operation (DPT/SLT)
244User Manual
To transfer a call to a phantom extension (Unscreened Call Transfer)
To answer a phantom extension call
Confirmation 
tone
During a conversation;
Flash the 
hookswitch.Dial toneRingback toneHang up.Dial the destination phantom
extension number.
phantom extension no.
PT
Ringback tone
During a conversation;
Hang up or pressSP-PHONE/MONITOR. Press Phantom
(flexible button).Press TRANSFER.
TRANSFER
Ringing starts at the destination
extension.The call...

Station Features and Operation (DPT/SLT)
User Manual245
Conditions
A phantom number must be assigned by System Programming before assigning the 
Phantom Extension button by Station Programming or System Programming.
If several extensions have the same phantom extension number, they will ring 
simultaneously.
A maximum of 128 phantom numbers can be assigned by System Programming.
The Phantom button cannot be used for feature settings such as Call Forwarding.
It is programmable not to ring the...

Station Features and Operation (DPT/SLT)
246User Manual
4.3.68 Pickup Dialing (Hot Line)
You can make a call to the pre-programmed party simply by going off-hook.
Programming the phone number
Setting / Canceling
Dialing
Conditions
This feature does not work if you go off-hook to answer an incoming call or retrieve a call 
on hold.
Up to 16 digits, consisting of 0 through 9 and  , can be stored. # cannot be stored.
Valid digits are 0 through 9,   and PAUSE button. For SLT users, PAUSE (pausing 
time)...

Station Features and Operation (DPT/SLT)
User Manual247

This feature is not available for ISDN telephones.
Programming Guide References
[204] Pickup Dial Waiting Time
User Manual References
4.5.9 KX-T7235 Display Features - System Feature Access Menu
4.5.12 KX-T7431 / KX-T7433 / KX-T7436 Display Features - System Feature Access Menu 

Station Features and Operation (DPT/SLT)
248User Manual
4.3.69 Privacy Release [PT only]
Allows you to establish a three-party conference call while connected to an existing call.
Setting
To leave the conference
To terminate one party and talk to the other
PT 
Press the corresponding 
CO.Press the flashing CO
within five seconds. -at your extension
-at the other extension
During a conversation with an outside party, to allow another 
extension to join the conversation;
Confirmation tone
(optional)...

Station Features and Operation (DPT/SLT)
User Manual249
Conditions
The CO button pressed to join the conversation needs to be assigned as a Single-CO (S-CO) 
button.
After the user presses the CO button, the CO indicator light of the other extension flashes 
rapidly for only 5 seconds. Pressing the CO button again gives you an additional 5 seconds.
This feature overrides Data Line Security and Executive Busy Override Deny.
When a two-party call is changed to a three-party call and vice versa, a...

Station Features and Operation (DPT/SLT)
250User Manual
4.3.70 Pulse to Tone Conversion
You can change the dialing mode from Pulse to Tone temporarily to access services such as 
computer telephone services, Voice Mail, etc., that require a tone.
 
Conditions
You cannot change the dialing mode from Tone to Pulse.
Dial the phone number
(Pulse mode).Dial     #.
phone no. (Pulse mode)
Dial the desired number
(Tone mode).
desired no. (Tone mode)
Any Telephone