Home > Panasonic > Communications System > Panasonic Kx-Td816c, Kx-td1232c Digital Super Hybrid System User Manual

Panasonic Kx-Td816c, Kx-td1232c Digital Super Hybrid System User Manual

Here you can view all the pages of manual Panasonic Kx-Td816c, Kx-td1232c Digital Super Hybrid System User Manual. The Panasonic manuals for Communications System are available online for free. You can easily download all the documents as PDF.

Page 201

Station Features and Operation (DPT/SLT)
User Manual201
During Keep Recording mode, if you want to stop recording the conversation, press the 
Two-Way Recording button.
An incoming call via a voice mail service can be monitored by the LCS feature while the 
caller is leaving a message in your mailbox even when you have not set a Voice Mail 
extension as the Call Forwarding destination.
Call Waiting
If the extension user is busy on a call when a caller begins to leave a message, a call waiting 
tone is...

Page 202

Station Features and Operation (DPT/SLT)
202User Manual
4.3.51 Lockout
If one party in a conversation goes on-hook, they both are disconnected from the speech path 
automatically. A reorder tone is sent to the off-hook party before it is disconnected. No 
operation is necessary. 

Page 203

Station Features and Operation (DPT/SLT)
User Manual203
4.3.52 Log-In / Log-Out
Allows you to assign the Log-In mode or Log-Out mode within a hunting, ring or UCD 
(Uniform Call Distribution) group. When in the Log-Out mode, you can leave the group 
temporarily, preventing hunting calls from being sent to your extension. The lightning patterns 
of the Log-In / Log-Out button and status are as follows.
Off : Log-In mode
Red : Log-Out mode
Flashing red moderately : Calls are waiting in the UCD queue
Log-In...

Page 204

Station Features and Operation (DPT/SLT)
204User Manual
Log-In / Log-Out (Using the feature number)
Conditions
By default, all extensions in the group are in Log-In mode.
When extensions are logged out, calls directed to the above mentioned group do not come 
in on their extension.
However, calls directed to their individual extension (extension call, DIL 1:1, DIL 1:N, etc.) 
still ring at their extension.

Log-In/Log-Out button 
The Log-In / Log-Out button can be assigned to a flexible CO button....

Page 205

Station Features and Operation (DPT/SLT)
User Manual205
4.3.53 Message Waiting
When the called extension or phantom extension is busy or does not answer your call, you can 
leave a notification so that the called party may call you back.
As a message receiver, the MESSAGE button light and an indication tone which you will hear 
when going off-hook let you know that a call has been received. If you receive notification, you 
can call back the original party with a simple operation. If required, you can...

Page 206

Station Features and Operation (DPT/SLT)
206User Manual
Canceling
Checking and Selecting a message notification by the receiver
Calling back the message notification sender
PT and SLT
extension no.
Lift the handset or press
SP-PHONE/MONITOR.
Hang up or press
SP-PHONE/MONITOR. Confirmation tone 
and dial tone.Dial 700.
700phantom extension no.
Dial the extension number or the phantom extension
number where you left a message notification.
or
Display PT
Press MESSAGE button, Another Extension Message...

Page 207

Station Features and Operation (DPT/SLT)
User Manual207
Clearing all message notifications left on your extension
Conditions
The system supports a maximum of 128 simultaneous messages. Except these, up to 128 
phantom messages can be recorded. If you try to set the 129th message, you will hear a 
reorder tone.
Callback Order 
If multiple message notifications are left at your extension, callback is executed in the order 
received.
If you select a specific message to call back, callback is executed in...

Page 208

Station Features and Operation (DPT/SLT)
208User Manual
Even if the MESSAGE buttons are neither provided nor assigned, dial tone 4*1 after going 
off-hook informs you if a message has been received at your extension. For standard 
telephone users, a special ring tone can be provided as notification.
With the KX-T7431, KX-T7433, KX-T7436 or KX-T7235, you can set or cancel this 
feature using the display operation.

A flexible button on the KX-T7250 (no MESSAGE button provided) can be assigned as 
the...

Page 209

Station Features and Operation (DPT/SLT)
User Manual209
4.3.54 Microphone Mute [PT only]
During a conversation in the hands-free mode, you can turn off your PTs microphone so that 
you can consult privately with others in the room. When you activate Microphone Mute, you 
can still listen to your callers voice but your caller cannot hear your voice.
Setting
Canceling
Conditions
This feature is only available during a hands-free conversation.
This feature is not available for KX-T7250.
PT
Press AUTO...

Page 210

Station Features and Operation (DPT/SLT)
210User Manual
4.3.55 Night / Day (Lunch / Break) Service
This system supports both the night and day modes of operation. The day mode includes the 
lunch and break modes. The system operation for originating and receiving calls can be 
changed depending on the mode. You can transfer received outside calls to assigned extension 
groups while in the lunch or break mode. Toll restriction calls can be programmed to prevent 
unauthorized toll calls at night. The...
Start reading Panasonic Kx-Td816c, Kx-td1232c Digital Super Hybrid System User Manual

Related Manuals for Panasonic Kx-Td816c, Kx-td1232c Digital Super Hybrid System User Manual

All Panasonic manuals