Panasonic Kx-Td816c, Kx-td1232c Digital Super Hybrid System User Manual

Station Features and Operation (DPT/SLT)
User Manual221
To talk to the third party after placing the current call on hold
Conditions
This feature can be enabled to any PTs (other than KX-T7400 series PT) by System 
Programming.
If the Whisper OHCA sender does not use a KX-T7400 series telephone, Whisper OHCA 
works as OHCA. If the receiver does not use a KX-T7400 series telephone, Whisper OHCA 
may not work properly. (e.g., the announcement may be heard by the other party.)
Class of Service...

Station Features and Operation (DPT/SLT)
222User Manual
4.3.27 Call Waiting
4.3.56 Off-Hook Call Announcement (OHCA) 

Station Features and Operation (DPT/SLT)
User Manual223
4.3.58 Off-Hook Monitor [PT only]
While you are on a handset call, your call can be monitored by the others in the room through 
SP-PHONE.
This feature is only available for the KX-T7431, KX-T7433 and KX-T7436 telephone users.
Setting
Switching from off-hook monitor to handset call
Switching from off-hook monitor to hands-free mode 
PT
The SP-PHONE indicator light turns red.
Your handset call is heard through the
SP-PHONE.
While on a handset call;...

Station Features and Operation (DPT/SLT)
224User Manual
Conditions
Making an OHCA call is not available if the other extension is in Off-Hook Monitor mode.
This feature is only available during a conversation with the handset.
Programming Guide References
[148] Off-Hook Monitor
User Manual References
4.3.48 Hands-free Operation [PT only] 

Station Features and Operation (DPT/SLT)
User Manual225
4.3.59 One-Touch Dialing [PT only]
Allows you to make a call (intercom or outside) or access a system feature with the touch of a 
button. This is done by storing an extension number, telephone number or feature number (up 
to 16 digits) in a One-Touch Dialing button.
Dialing
Conditions
One-Touch Dialing button can be programmed by Station, User or System Programming.
If you store the telephone number of an outside party, a line access code (9, or...

Station Features and Operation (DPT/SLT)
226User Manual
4.3.60 Operator Call
Allows you to call an operator within the system. Two extensions can be assigned as Operator 
1 and 2.
Conditions
If no operator is assigned, this feature is not available and you will hear a reorder tone after 
dialing the feature number.
The call is routed to Operator 1 first. If Operator 1 is busy, then it is routed to Operator 2. 
Through System Programming, it is possible to change the routing so that Operator 1 and...

Station Features and Operation (DPT/SLT)
User Manual227
4.3.61 Outward Dialing, Line Access — SUMMARY
A CO line can be accessed in the following ways.
Conditions
The CO button assignment on your telephone can be re-arranged as required. Refer to 
2.2.2 Flexible Button Assignment.
After dialing the feature number or pressing the CO button, you will hear one of the 
following tones:
Dial tone : Indicates an idle outside line is accessed.
—is shown on the display. (xx: outside line number)
Busy tone :...

Station Features and Operation (DPT/SLT)
228User Manual
—The extension has been locked by the owner (Electronic Station Lockout) or the 
 operator / manager (Remote Station Lock Control).
—The extension is restricted by the account code mode, Verified - All Calls or Verified 
 - Toll Restriction Override.
—The extension is restricted from making toll calls (Toll Restriction).
Programming Guide References
[103] Automatic Access Outside Line Assignment
[400] Outside Line Connection Assignment
[605-606]...

Station Features and Operation (DPT/SLT)
User Manual229
Conditions
You may press the L-CO button directly without first going off-hook.
Line Access, Individual [PT only]
You can get an idle outside line for making a call by simply pressing a CO button (Single-CO) 
directly.
Conditions
You may press the CO button directly without first going off-hook.
Line Access, Outside Line Group
Allows you to select an idle outside line within a designated trunk group. Through 
programming, outside lines can be...

Station Features and Operation (DPT/SLT)
230User Manual
4.3.62 Paging — SUMMARY
Allows you to make a voice announcement to several people at the same time. Your message 
is announced over the built-in speakers of proprietary telephones (PT) and/or external speakers 
(External Pagers). The paged person can answer your page from a nearby telephone. There are 
three types of paging as shown below. You can select the appropriate type according to your 
needs.
Conditions
To answer the page, refer to 4.3.63...