Panasonic Kx-Td816c, Kx-td1232c Digital Super Hybrid System User Manual

Station Features and Operation (DPT/SLT)
User Manual291
Recording a message
Any Telephone
Lift the handset or pressSP-PHONE/MONITOR.Enter OGM number
(1 through 4).
Record a message.
Confirmation
tone
Confirmation 
tone
Press STORE or wait until 
playback is finishedConfirmation 
tone
Dial 361.
Hang up or press
SP-PHONE/MONITOR.
361
Press STORE or wait until
a maximum recording time
has elapsed.
AUTO DIAL
STORE
AUTO DIAL
STORE
The STORE indicator light turns off.
OGM no.

Time counter
(seconds)
OGM number...

Station Features and Operation (DPT/SLT)
292User Manual
Playing back a message
7235 / 7436
Enter OGM number 
(1 through 4).
AUTO DIAL
STORE
Press STOREor wait until
playback is finished.
Press Features. Rotate Jog Dialor press NEXT
until the following is displayed.Press OGM Playback.
Confirmation tone Confirmation tone 

Time counter (seconds)
The STORE indicator lights.
The message is played back and the counter starts.
OGM 1    Play:28
The STORE indicator light turns off.
FeaturesNEXT
OR
OGM Playback...

Station Features and Operation (DPT/SLT)
User Manual293
Playing back a message
Enter OGM number 
(1 through 4).
AUTO DIAL
STORE
Press STOREor wait until
playback is finished.
Press MODEuntil
Feature Accessis
displayed.Rotate Jog Dialuntil OGM
Play is displayed.Press SELECT.
Confirmation tone  Confirmation tone 

Time counter (seconds)
The STORE indicator lights.
The message is played back and the counter starts.
OGM 1    Play:28
The STORE indicator light turns off.
OGM Play   1-4→SELECT
MODE
MODE
7431...

Station Features and Operation (DPT/SLT)
294User Manual
Playing back a message
AUTO DIAL
STORE
Press STOREor wait until
playback is finished. Confirmation tone  Confirmation tone 

Time counter (seconds)
The STORE indicator lights.
The message is played back and the counter starts.
OGM 1    Play:28
The STORE indicator light turns off.
Press SHIFTuntil
FEATis displayed.Press FEAT.
Rotate Jog Dialuntil
OGM Play is at the
arrow.Press SEL.
SHIFTFEATOGM Play     1-4
OGM Record   1-4
MENU →
SEL
7433
Enter OGM...

Station Features and Operation (DPT/SLT)
User Manual295
Playing back a message
Conditions
OGM Type
1: for DISA Message 1 or UCD Message 1
2: for DISA Message 2 or UCD Message 2
3: for Timed Reminder Message or UCD Message 3
4: UCD Message 4
You can select a maximum recording time of 0/16/32/64 seconds for each message 
(Outgoing Message Time). The total length must be under sixty four seconds.
Programming Guide References
[215] Outgoing Message Time
User Manual References
4.3.34 Direct Inward System...

Station Features and Operation (DPT/SLT)
296User Manual
4.4.7 Remote Station Lock Control
The Manager and the Operators can remotely lock or unlock any extension. To lock an 
extension, you can select to lock outside calls or intercom calls.
Programming
Conditions
This feature supersedes the Electronic Station Lockout feature. If Electronic Station 
Lockout has already been set by the extension user and this feature is set, the extension 
user cannot cancel the lock. Only the Manager and the Operators...

Station Features and Operation (DPT/SLT)
User Manual297
4.4.8 System Working Report
The operator or manager can print or clear the system working report. For details about the 
recorded contents, please consult with your dealer.
7235 / 7436
Hang up or press
SP-PHONE.
Press Features. Press
NEXT until the 
following isdisplayed.Press SWR Printout.
Confirmation tone
and dial tone 

— 
1: to print out
— 
0: to clearSWR Data Clear
SWR Data Dump
FeaturesNEXTSWR Printout(→1/0)10or
Dial 1 or 0.
– 1: to print out...

Station Features and Operation (DPT/SLT)
298User Manual
Conditions
A printer connected to the Serial Interface (RS-232C) connector can be used to print the 
recorded data.
If the recorded data is cleared, new data will be recorded.
Hang up or press
SP-PHONE.
Press SHIFTuntil
FEATis displayed.Press FEAT. Rotate Jog Dialuntil
SWR Printout is
at the arrow.Press SEL.
Confirmation tone
and dial tone 
SHIFTFEATSWR Print
Timed Reminder  
MENU →
SEL
7433
1/0

– 
1: to print out 
– 
0: to clearSWR Data ClearSWR...

Station Features and Operation (DPT/SLT)
User Manual299
Features Guide References
System Working Report 

Station Features and Operation (DPT/SLT)
300User Manual
4.4.9 Timed Reminder, Remote (Wake-Up Call)
The Manager and the Operators can remotely set or cancel the Timed Reminder to the desired 
extension.
Setting
7235 / 7436
Dial the desired extension 
number or press DSS 
   (flexible button).
Hang up or press 
SP-PHONE.
Enter the minute 
(00 through 59).
hourminute
For AM: Dial 0. 
For PM: Dial 1.
For one time alarm*
1: Dial 0. 
For daily alarm*2: Dial 1.
or
Confirmation 
tone and dial tone
extension...