Home
>
Panasonic
>
Communications System
>
Panasonic Kx-Td816c, Kx-td1232c Digital Super Hybrid System User Manual
Panasonic Kx-Td816c, Kx-td1232c Digital Super Hybrid System User Manual
Here you can view all the pages of manual Panasonic Kx-Td816c, Kx-td1232c Digital Super Hybrid System User Manual. The Panasonic manuals for Communications System are available online for free. You can easily download all the documents as PDF.
Page 341
Station Features and Operation (DPT/SLT) User Manual341 — Using the Soft button or rotating Jog Dial directly — System Speed Dialing 1. Rotate the Jog Dial until the desired item is at the arrow. 2.Press the CALL (S3) button or go off-hook. Station Speed Dialing / Extension Dialing 1. Press the STA (S1) or EXT (S2) button. 2.Rotate the Jog Dial until the desired item is at the arrow. 3.Press the CALL (S3) button or go off-hook.Note You can press the Function button (F1 through F10) on the same line...
Page 342
Station Features and Operation (DPT/SLT) 342User Manual 4.5.12 KX-T7431 / KX-T7433 / KX-T7436 Display Features - System Feature Access Menu You can access the features which are displayed in alphabetical order. To access the features, you may shift the display to the Jog Dial Operation display by pressing the MODE or SHIFT button first. Then follow the procedures below. To access the features while receiving a call (e.g., ringing, being paged), press the INTERCOM button first. Then follow the...
Page 343
Station Features and Operation (DPT/SLT) User Manual343 System Feature List You can access the following features which are displayed in alphabetical order. The parameters use in the list are for a telephone connected to a KX-TD1232. For more details about the features and the required parameters, refer to the respective features in 4.3 Station Features and Operation, and 4.4 Operator / Manager Service Features. KX-T7431 1. Rotate the Jog Dial until the desired item is displayed. 2.Press the SELECT...
Page 344
Station Features and Operation (DPT/SLT) 344User Manual C.Pickup Direct ( ext) C.PickupDRT extPick up a specific extensions call. C.Pickup Group C.Pickup GRPPick up a call within your extension group. C.Waiting ( 0-3) C.Waiting 0-3Cancel or set the Call Waiting feature (Call Waiting, OHCA or Whisper OHCA). Call Park ( 0-9) Call Park 0-9Place a call on hold in a system parking area. Callback Busy Cancel Callback CancelCancel the setting which reserves a busy line. Data Line On/Off ( 1/0) Data Line...
Page 345
Station Features and Operation (DPT/SLT) User Manual345 Paging External ( 0-4) Page Extrn 0-4Page through the speaker. Paging Group ( 0-8) Page GRP 0-8Page to all or a particular paging group. Parallel On/Off( 1/0) Parallel 1/0Set whether a Single Line Telephone connected in parallel will ring or not when receiving a call. Pickup Dialing ( 1/0) Pickup Dial 1/0Set or cancel the feature, calling to a pre-set party by going off-hook. Pickup DL Prg ( ..+#) Pickup DL PG..#Store the extension or phone...
Page 347
DSS Console Features User Manual347 Section 5 DSS Console Features Note: All illustrations of the DPT (paired telephone) used in these operating instructions are based on model KX-T7235.
Page 348
DSS Console Features 348User Manual 5.1 Configuration 5.1.1 Configuration With a Directed Station Selection (DSS) Console, you can make or transfer calls and access system features with the touch of a button. The DSS Console must be connected to the Panasonic Digital Super Hybrid System and paired with a DPT. System Programming is required to designate the jack number of the paired PT. With a paired telephone, you can carry out the following operations using the DSS Console: Direct access to an...
Page 349
DSS Console Features User Manual349 5.1.2 Location of Controls KX-T7240 DSS Buttons with Busy Lamp Field (BLF) (01 through 32): Used to access extensions. The BLF indicates the busy or idle status of each corresponding extension in the system. These buttons can also be changed to other function buttons. PF (Programmable Feature) Buttons (01 through 16): These buttons are provided with no default settings. With a paired telephone, you can program the buttons as other function buttons. TO EMSS Used to...
Page 350
DSS Console Features 350User Manual Connection KX-T7440 KX-T7441 DSS Buttons with Busy Lamp Field (BLF)(01 through 66)DSS Buttons with Busy Lamp Field (BLF)(01 through 48) ANSWER ButtonRELEASE Button →Connect to the Panasonic Digital Super Hybrid System. Included telephone line cord