Panasonic Kx Td7685 Operating Instructions Manual
Here you can view all the pages of manual Panasonic Kx Td7685 Operating Instructions Manual. The Panasonic manuals for Phone are available online for free. You can easily download all the documents as PDF.
Page 1
Document Version 2008-01 Operating Instructions DECT 6.0 Portable Station Model No.KX-TD7685 Thank you for purchasing a Panasonic DECT 6.0 Portable Station. Please read this manual carefully before using this product and save this manual for future use. Please use only the battery provided and charge the battery for about 7 hours before using the handset for the first time. See page 67 for System Requirements.
Page 2
2Document Version 2008-01 Table of Contents Before Initial Use.............................................................................................. 4 Accessories (included) ....................................................................................... 4 Installation............................................................................................................ 5 Battery...
Page 3
Document Version 2008-01 3 Character Mode Table ..................................................................................... 43 Locking the Handset Phonebook .................................................................... 44 Locking the Handset Phonebook ..................................................................... 44 Unlocking the Handset Phonebook ................................................................. 44 Unlocking the Handset Phonebook Temporarily...
Page 4
Before Initial Use 4Document Version 2008-01 Please read “Important Information” on page 60 before using. Read and understand all instructions. Accessories (included) • To order accessories, call toll free 1-800-332-5368. Accessories (included) AC adaptor ....................... One Charger ............................ One Battery .............................. One [Part No.] [Part No.] [Part No.] PQLV207 PSWETD7685M N4HHGMB00005 or HHR-P103 Belt Clip ............................ One Belt Clip Holder...
Page 5
Before Initial Use Document Version 2008-01 5 Installation Battery Installation Insert the battery, and close the cover as indicated below. Charger Connection Connect the AC adaptor to the charger. Charging the Battery At the time of shipment, the battery is not charged. Please charge the battery for about 7 hours before using the handset for the first time. Installation Battery Installation Charger Connection 12 • The AC adaptor should be connected to a vertically oriented or floor-mounted AC...
Page 6
Before Initial Use 6Document Version 2008-01 Charger Wall Mounting Attaching the Belt Clip and Belt Clip Holder You can attach the handset to your belt by following the steps below. Charger Wall Mounting 1.Install the two included screws in the wall, spacing them 28 mm (1-1/8 in) apart. 2.Mount the charger securely on the wall. • Make sure that the wall that the charger will be attached to is strong enough to sup- port the weight of the handset and charger (270 g [0.6 lb]). If not, it is necessary for...
Page 7
Before Operating the Handset Document Version 2008-01 7 Location of ControlsLocation of Controls [Back View] Speaker The headset is an option. Please use only a Panasonic headset below. KX-TCA86/KX-TCA91/ KX-TCA92 Open the cover.Press POWER for more than 2 seconds. [Power On] Standby mode [Power Off] Blank display Up Down Left Right You can use the Joy- stick to move the cursor in the desired direction. Press the center button to confirm a selection. 132 46 8 0795 B C D E F G H J K L N O M I A L M
Page 8
Before Operating the Handset 8Document Version 2008-01 *1 You can talk with the other party alternately through the speaker in a quiet room. During a conversation using a headset, Hands-free mode does not work. Key Lock You can lock all keys other than the Joystick while the handset is in standby mode. Ringer/Charger Indicator Display Headset JackRefer to “Display” on page 14. TALK/SP-PHONE (Speakerphone) Key Left/Right Soft Key Used to make or answer calls, or toggle between the...
Page 9
Before Operating the Handset Document Version 2008-01 9 Meeting Mode Meeting Mode allows you to turn off the ringer and set the handset to vibrate when calls are received. This can be useful in situations where you do not want to be disturbed, such as during a meeting. When Meeting Mode is active, the microphone’s sensitivity is increased, and the following features are turned off automatically, regardless of their settings. – Ringer Volume – Ring On Charger – Auto Answer – Key Tone – Range Alarm –...
Page 10
Before Operating the Handset 10 Document Version 2008-01 Selecting the Display Language You can select the desired language (English/Spanish/French). • When set to “Auto”, the language settings of the PBX will be used. • The display language of both the handset and PBX can be selected, and both should be set to the same language. For more information, refer to the user documentation for your PBX. Editing the Standby Display Name You can edit the name of the standby mode display of the handset. • To...