Panasonic Kx-Td500 Features Guide

BFeatures Guide
32 Features Guide
Button, Line Access Ñ Primary Directory Number (PDN) 
DescriptionUsed to make or receive both intercom and outside (CO, TIE) calls,
and access various system features.
Conditions¥PDN Button Assignment
A PDN button can be assigned to any one of the flexible CO buttons on
a PT by Station, User or System Programming.
Up to three PDN buttons can be assigned to any flexible CO button on
a PT. However, the first PDN button should always be assigned to the
CO 01 button...

Features GuideB
Features Guide 33
¥Delayed Ringing
Immediate, delayed or no ringing can be assigned to the first PDN but-
ton. This assignment applies to all PDN buttons on the same PT.
¥Ringing Tone Selection (DPT only)
A ringing tone type for PDN buttons can be selected either by Station
or System Programming.
Programming References
System Programming................................Installation Manual, Section 4
4.4.2  Line - Extension Line
Ñ Flexible CO Key Assignment
User...

BFeatures Guide
34 Features Guide
Button, Line Access Ñ Secondary Directory Number (SDN)  
DescriptionThe extension user can assign the PDN of other extension (owner
extension) on his/her own extension as the SDN button. SDN but-
ton reflects the status of the PDN button of owner extension.
Incoming calls to the owner extension appear on both PDN button
and SDN button. 
Assignable for a DN type PT only.  
LED Indicator
 Patterns Ð SDN
Conditions¥SDN Button Assignment
An SDN button can be assigned to a...

Features GuideB
Features Guide 35
¥ SDN buttons can be used to answer the following types of call which
come in on its associated PDN.
Ñ DIL 1:1
Ñ DISA
Ñ DID
Ñ UCD
Ñ Call hunting
Ñ IRNA
Ñ Extension
¥ Up to eight SDN buttons per PDN button (DN type PT only) can be
assigned on eight different PTs respectively.
¥  On a single PT, up to three different SDN buttons can be assigned.
¥Delayed Ringing
Immediate, delayed or no ringing can be assigned to SDN buttons.
Each SDN button can have unique delayed ringing...

BFeatures Guide
36 Features Guide
Button, Line Access Ñ Single-CO (S-CO) 
DescriptionA Single-CO (S-CO) button is a CO line access button.  This
allows the PT user to get a specific line for making or receiving
outside calls simply by pressing an S-CO button.  An incoming call
can be directed to an S-CO button.  
Assignable for both ICM type and DN type PTs.
LED Indicator
 Patterns Ð S-CO
Conditions¥ S-CO Button Assignment
An S-CO button can be assigned to a flexible CO button on a PT or a
flexible DSS...

Features GuideB
Features Guide 37
¥ ARS Override
If Automatic Route Selection (ARS) is set, it is overridden by an out-
going call made by pressing the S-CO button.
¥ Ringing Tone Selection (DPT only)
A ringing tone type for S-CO buttons can be selected either by Station
or System Programming.
Programming References
System Programming................................Installation Manual, Section 4
4.2.3  System - Class of Service
Ñ Trunk Group Setting
4.4.2  Line - Extension Line
Ñ Flexible CO Key...

Buttons on Proprietary Telephones
DescriptionProprietary Telephones are provided with the feature / line access
buttons listed below:  
4: The button is provided on the designated telephones.
  : The button is provided with an LED (Light Emitting Diode).
*  : The buttons which can be changed to function as a feature button are called flexible buttons. 
! : The button is provided without an LED.
(x) : Shows the number of buttons only if multiple buttons are provided.
The functions of the listed buttons...

Features GuideB
Features Guide 39
CONF (Conference): 
Used to establish a 3-party conference call.
FLASH: 
Used to disconnect the current call and get another line for making
a call without hanging up (Flash).  Sends a flash signal to the
Central Office or host PBX to access their features (External
Feature Access). 
Function:
Used to perform the displayed function / operation.
FWD / DND (Call Forwarding / Do Not Disturb): 
Used to program Call Forwarding, set Do Not Disturb.
HOLD:
Used to place a call...

BFeatures Guide
40 Features Guide
SAVE: 
Used to store a dialed telephone number for Saved Number Redial.
SELECT:
Used to select the displayed function or to call the displayed phone
number. 
SHIFT:
Used to access the next level of Soft button function.
Soft: 
Pressing a Soft button performs the function / operation appearing
on the bottom line of the display.
SP-PHONE (Speakerphone): 
Used for hands-free operation.  Pressing the button causes the tele-
phone to switch between handset and hands-free...

Features GuideC
Features Guide 41
CALL FORWARDING FEATURES Ð SUMMARY
DescriptionProvides automatic redirection of incoming calls to the pre-
assigned destination (extension or outside party).
Call Forwarding features can be categorized as follows:
Call Forwarding Ð All Calls
Call Forwarding Ð Busy
Call Forwarding Ð Busy / No Answer
Call Forwarding Ð Follow Me
Call Forwarding Ð No Answer
Call Forwarding Ð to CO/TIE