Panasonic Kx-Td500 Features Guide

Absent Message Capability
DescriptionOnce set, this option provides a message, on the display of the call-
ing extension, to show the reason for the called extensionÕs
absence.  Up to nine absent messages, common to all extension
users, can be programmed as desired.
There are six pre-programmed default absent messages.
Note: The Ò%Ó means a parameter to be entered when assigning a mes-
sage at individual extension.
Conditions¥Absent Messages can be programmed either by User or System Programming.
¥...

Account Code Entry
DescriptionAn Account Code (max. 10 digits) is used to identify incoming and
outgoing CO calls for accounting and billing purposes. 
[For Outgoing CO Calls]
One of the following three Account Code Entry modes is selected
for each extension on a Class of Service basis:
V
erified-All Calls mode:
An extension user must always enter a pre-assigned account code
when making CO calls.
V
erified-Toll Restriction Override mode:
An extension user can enter a pre-assigned account code to over-...

AFeatures Guide
4 Features Guide
¥TRS Level
Each account code is appended with unique TRS Level for ÒToll
Restriction Override by Account Code EntryÓ feature.
¥Emergency numbers
Regardless of the Account Code Entry mode setting, emergency num-
bers can be dialed out without entering an account code.
¥Account button
The Account button can be used instead of dialing the feature number.
It can be assigned to a flexible (CO, DSS, PF) button by Station, User
or System Programming.
¥ The account code used for...

Alternate Calling Ð Ring / Voice
DescriptionAllows an extension user either to ring-signal (Ring call) or voice-
signal (voice call) the other PT extensions.
Ring call: The called PT rings.
Voice call: The callerÕs voice is heard through the built-in speaker
of the called PT instead of ringing.
The calling extension user can switch ring-signaling to voice-sig-
naling and vice versa by pressing Ò Ó during an intercom call.
Conditions¥ Mode Selection
The PT user can select either to be ring-signaled or...

AFeatures Guide
6 Features Guide
ANSWER and RELEASE buttons Operation
DescriptionANSWER and RELEASE buttons are useful when using the head-
set or in hands-free mode. With the ANSWER button, an extension
user can answer all incoming calls. With the RELEASE button, an
extension user can disconnect the line during or after a conversa-
tion or complete a Call Transfer.
Conditions¥  ANSWER and RELEASE Buttons Assignment
ANSWER and RELEASE buttons are provided as a fixed button on the
KX-T7441 (DSS Console)....

Features GuideA
Features Guide 7
Answering, Direct Trunk 
DescriptionAllows the PT user to answer an incoming CO call simply by
directly pressing a flashing CO button without lifting the handset
or pressing the SP-PHONE / MONITOR button.
This feature permits the extension user to answer the desired line
when multiple incoming CO calls are coming in on their extension.  
ConditionsNone
Programming References
System Programming................................Installation Manual, Section 4
4.4.2  Line -...

AFeatures Guide
8 Features Guide
Automatic Callback Busy (Camp-On)
DescriptionThe system calls back the extension user when the called party or
the selected CO line becomes idle, if this feature was activated
beforehand.  
Automatic Callback Ð Extension
If the extension user answers the callback ringing, the called exten-
sion (previously busy) automatically starts ringing.
Automatic Callback Ð 
Trunk
If the extension user answers the callback ringing, the designated
CO line (previously busy) is...

Features GuideA
Features Guide 9
Automatic Configuration 
DescriptionThis is one of the DPT Integration features.
If DPT lntegration is activated, the system transmits the extension
number configuration information to the Voice Processing System
(VPS). The VPS then automatically creates the mailbox for each
extension based on this information.
Conditions ¥ Correct Mailbox No. length must be selected in Panasonic Voice Mail
System Reset/Clear Menu to create proper Mailbox No. based on three-
digit or...

AFeatures Guide
10 Features Guide
Automatic Hold Ð All Calls 
DescriptionAllows the PT user engaged in a call (both extension and outside)
to hold the current call and get a new line for transfer with a single
operation.
This simplifies the transfer operation by eliminating the need for
pressing the TRANSFER button.
The PT user engaged in a call can also answer a new incoming call
without loosing the current call by pressing the CO/DN (on which
the call is coming) button. Then the current call is placed...

Features GuideA
Features Guide 11
Automatic Hold Ð Trunk 
DescriptionAllows the PT user engaged in a CO call to hold the current call
and get a new line with a single operation.
This feature can be categorized as the following two types:
Automatic Hold - 
Trunk (CO)
Allows the PT user engaged in a CO call to hold the current call
and get another CO line for making or answering purpose with a
single operation.
Automatic Hold - 
Trunk (DSS)
Allows the PT user engaged in a CO call to transfer the current...