Home > Panasonic > Wireless PBX > Panasonic Kx Taw848_en_adv_v3_om Operating Manual

Panasonic Kx Taw848_en_adv_v3_om Operating Manual

Here you can view all the pages of manual Panasonic Kx Taw848_en_adv_v3_om Operating Manual. The Panasonic manuals for Wireless PBX are available online for free. You can easily download all the documents as PDF.

Page 141

3.3 System Programming
Operating Manual 141
 Procedure
The basic steps are shown below.
1.Entering the programming mode
2.Programming
You can enter each program number (3 digits).
3.Exiting the modeTo exit the programming mode at any time, lift the handset.
To exit the programming mode at any time, lift the handset.
Enter system password. Enter        . 
system password
Press PROGRAMor PAUSE.
OR
Press PROGRAMor PAUSE.
OR 

Page 142

3.3 System Programming
142 Operating Manual
3.3.2 System Programming
 [000] Date & Time
The proprietary telephones display the current date and time while on-hook.
After changing the desired values, you can press the STORE button. You do not have to 
perform the rest of the steps.
 The clock starts immediately after the STORE button is pressed.
 You cannot leave a value empty.
 You can clear the entry by pressing the CLEAR button.
To confirm your entry after storing data:
– The STORE button light:...

Page 143

3.3 System Programming
Operating Manual 143
 [001] System Speed Dialing Number
You can store the phone numbers of frequently dialed numbers.
 If the desired number is more than 32 digits, divide the number and store it into more than 
one speed dialing number.
  , #, FLASH/RECALL, PAUSE, and Secret (INTERCOM) can also be stored.
If you do not want to display the stored number when making a call, press the Secret 
(INTERCOM) button before and after the numbers you wish to conceal.
If you store an...

Page 144

3.3 System Programming
144 Operating Manual
 [002] System Speed Dialing Name
You can store the name associated with the speed dialing number. These names are displayed when 
making calls using the display operation. To enter characters, refer to 1.3.14 Character Entry.
 [003] Extension Number
You can assign an extension number to each extension.
 The leading number(s) should be the same as the number(s) assigned for Flexible 
Numbering. For more details, refer to the Feature Manual.
 A duplicate entry...

Page 145

3.3 System Programming
Operating Manual 145
 [004] Extension Name
You can store the name of an extension user. This is useful if you want to know who is calling, or who you 
are calling when making an intercom call using the directory. 
To enter characters, refer to 1.3.14 Character Entry.
Enter 004.Press END.
Press NEXT. Press PREV.
To continue
To end
004
Enter extension 
number.
extension no.
Enter name(max. 20 
characters).
name
OR
Press STORE.Press STORE. 

Page 146

3.3 System Programming
146 Operating Manual 

Page 147

Operating Manual 147
Section 4
Appendix
This chapter provides the Troubleshooting, the Feature 
Number Table and Tone List. Check the Troubleshooting 
section before consulting your dealer. 

Page 148

4.1 Troubleshooting
148 Operating Manual
4.1 Troubleshooting
4.1.1 Troubleshooting
 Troubleshooting
Problem Remedy
The telephone does not work properly.
  Confirm with your manager that your settings are 
correct.
  If the problem persists, consult your dealer.
The telephone does not respond when 
buttons are pressed.The telephone is locked. 
 Unlock your telephone. (  1.3.24 Extension 
Dial Lock, 2.1.4 Remote Extension Dial Lock)
Some features do not work.System management may restrict certain...

Page 149

4.1 Troubleshooting
Operating Manual 149
A reorder tone is audible or Restricted 
is displayed.The telephone is locked.
 Unlock your telephone. (  1.3.24 Extension 
Dial Lock, 2.1.4 Remote Extension Dial Lock)
Toll restriction is activated.
 Consult your manager or dealer. 
An account code is required. (  1.3.2 Account 
Code Entry, 1.3.51 Verification Code Entry, 1.3.57 
Walking COS)
I cannot make an outside call using the 
One-touch Dialing button or speed 
dialing.A line access number was not...

Page 150

4.1 Troubleshooting
150 Operating Manual
The date and time are not correct.Set the date and time by system programming. 
(  [000] Date & Time in 3.3.2 System 
Programming)
The display is not shown well.
  Change the Display contrast level.
(  3.1.2 Personal Programming)
The MESSAGE button light lit.Another extension left you a message waiting 
indication while you were on the phone or away 
from your desk. Problem Remedy 
Start reading Panasonic Kx Taw848_en_adv_v3_om Operating Manual

Related Manuals for Panasonic Kx Taw848_en_adv_v3_om Operating Manual

All Panasonic manuals