Panasonic Kx Ta824 User Manual

3.2 Customizing Your PBX (System Programming)
User Manual 131
 Procedure
The basic steps are shown below.
1. To enter programming mode
2.To program 
You can enter each program number (3 digits).
3.To exit programming mode
Enter manager password. Enter     #. 
manager password
Press PROGRAM.
Press PROGRAM. 

3.2 Customizing Your PBX (System Programming)
132 User Manual
3.2.2 System Programming
 System Speed Dialing Number [001]
You can store frequently used phone numbers for convenient dialing.
 If the desired number is more than 32 digits, divide the number and store it into more than 
one speed dialing number.
, #, FLASH/RECALL, PAUSE, SECRET (INTERCOM), and – (CONF) can also be 
stored.
 If you do not want to display the stored number when making a call, press the SECRET 
(INTERCOM) button before and...

3.2 Customizing Your PBX (System Programming)
User Manual 133
 System Speed Dialing Name [011]
You can store the name associated with each speed dialing number. These names are displayed when 
making calls using the System Speed Dialing feature. To enter characters, refer to 
Entering Characters.
 DISA Security Code [512]
You can assign required Direct Inward System Access (DISA) security codes if Trunk Security or All 
Security is selected in DISA Security Mode [511].
Enter 011. Dial system 
speed...

3.2 Customizing Your PBX (System Programming)
134 User Manual
 DISA Security Code Digits [530]
You can select the number of digits used for DISA security codes assigned in DISA Security Code [512].
WARNING 
There is a risk that fraudulent telephone calls will be made using the Outside-to-
Outside (CO-to-CO) Line Call feature of DISA.
 
The cost of such calls will be billed to the owner/renter of the PBX. 
To protect the PBX from this kind of fraudulent use, we strongly recommend:
a)Enabling DISA...

3.2 Customizing Your PBX (System Programming)
User Manual 135
 Entering Characters
You can enter the following characters. The table below shows you the characters available for each button. 
* This character is only available for the KX-T7730/KX-T7735.
 To enter Ann,
Notes
 To move the cursor right, press .
 To delete all characters, press CLEAR. To delete a character, press .
Times (Pressing 
SELECT)
Buttons
14
1
2536
2
3
4
5
6
7
8
9
A
D
G
J
M
P
T
$ ?
a Bb Cc
d EeFf
g HhIi
j Kk Ll
m NnOo
S QpRq
t Uu...

3.2 Customizing Your PBX (System Programming)
136 User Manual 

User Manual 137
Section 4
Appendix
This chapter provides Troubleshooting, the Feature Number 
Table and Tone List. Check the Troubleshooting section before 
consulting your dealer. 

4.1 Troubleshooting
138 User Manual
4.1 Troubleshooting
4.1.1 Troubleshooting
ProblemRemedy
I cannot make calls using the telephone.The telephone is locked.  
 Unlock your telephone. ( 1.5.3 
Preventing Other People from Using Your 
Telephone (Extension Lock), 2.1.1 Locking 
Other Extensions (Remote Extension Lock))
Some features do not function.System management may restrict certain 
features. 
 
 Consult your manager or dealer. 
I cannot make calls to other extensions 
using a proprietary telephone...

4.1 Troubleshooting
User Manual 139
When I try to make an outside (CO) line 
call, I hear a reorder tone, or the display 
shows Restricted. The telephone is locked. 
 Unlock your telephone. ( 1.5.3 
Preventing Other People from Using Your 
Telephone (Extension Lock), 2.1.1 Locking 
Other Extensions (Remote Extension Lock))
Toll restriction is activated. 
 Consult your manager or dealer. 
An account code is required. ( 1.2.6 
Using Your Calling Privileges at Another 
Extension (Walking COS), Using an...

4.1 Troubleshooting
140 User Manual
I cannot send a call waiting tone to the 
dialed extension.The other party has not set the Call Waiting 
feature.
 
( Sending a Call Waiting Tone to a Busy 
Extension (Busy Station Signaling [BSS]), 1.4.4 
Answering Call Waiting, 1.7.3 Receiving Call 
Wa iting)
The other party has set Data Line Security. 
( 1.7.6 Protecting Your Line against 
Notification Tones (Data Line Security))
I forgot my extension password. Ask your manager to assist you. 
( 2.1.1 Locking...