Panasonic Kx-T30810 Installation Manual

until the desired mode appears 
~-.----.---.-~I 
[24] [NEXT] [SELECT] [MEMORY][END] 
s 
For telephone instruments that have automatic 
busy tone detection, it is suggested that busy 
tone type (I) is to be used. 
Selection 
of busy tone type (I) insures that the 
camp-on feature of the Panasonic ITS phones 
will operate. Because Panasonic ITS phones are equipped 
with automatic busy tone detection in the 
speakerphone mode, calls will be terminated 
upon hearing a busy tone signal of tone type 
(2)...

I.. .._____________........~~~.....~..~~ until the desired time appears 
[25] 
[NEXT] [SEI L -r 
2-33  A tone indication will be heard at the holding 
extension to remind user that he still has a call 
on hold. 
The reminder will be sounded after 3 minutes 
but can be changed. 
There are 9 choices ranging from (1) minute to 
(9). 
, 
1. Dial (25). 
“AUTO HOLD ALARM” will be display- 
ed. 
. Press the NEXT button. 
“TIME: 3 MIN” will be displayed and “3” 
will blink. 
. Repeatpressing the SELECT button...

[26] [NEXT] [SEI . . . . ..__......._.............. 
until the desired time appears 
ECT] [MEMORY] [END] 
When the handset of the holding extension is 
replaced on calls, you may have automatic hold 
recall after the desired time elapses. 
The hold recall time set can be removed 01 
added at customer’s request. 
. Dial (26). 
“HOLD RECALL TIME” will be display- 
ed. 
Example: 
1.5 minutes=[26] [NEXT] [SELECT] 
[SELECT] [MEMORY] [END] 
e 
See page 5-17. 
2. Press the NEXT button, 
“TIME: 30 SEC” will be...

[27] [NEXT] [SELECT] [MEMORY] [END] 
Exatnple: 
The ackuorrjledge totle that is heard after acces- 
sitlg the extertlal pagitlg cat1 he removed or 
added at the customer’s request. To elimirzate the pagirzg access tone. 
[27] [NEXT] [SELECT] [MEMORY][END] 
a Dial 127). 
“EXT-PAG ACK-TONE” will be display- 
ed. 
. Press the NEXT buttor?. 
“ENABLE” will be displayed and blink. 
, 
3. Press the SELECT button to alteixate be- 
tweet1 ENABLE atld DISABLE to select the 
desired mode. 
s Press the MEMORY...

until the desired mode appears 
r----------- I 
I 
1291 [NEXT] [SE&T] [MEMORY] [END] 
Set to “WITH 1” for Toll Restriction in some 
area where it is need to dial 1 to toll call (long 
distance). m Dial (29). 
“TOLL PREFIX” will be displayed. 
Example: 
You are required to insert a dial “1” before 
dialing the area code for long distance call. 
l-201 -348-7000 
i---. area code . Press the NEXT button. 
“WITH 1” will be displayed and blink. 
3. Press the SELECT button to alternate 
between “WITHOUT 1” and...

r----- 
until the desired mode appears - 
------~,_;.,, 
[30] [NEXT] [SELECT] [ME 
2-37 
When you dialed on outside line by speed 
dialing, the dialed number can be secret. 
The dialed number will not be displayed on the 
LCD 
of the KX-T30830. 0 Dial (30). 
“SECRET AUTO DIAL” will be dis- 
played. 
. Press NEXT button. 
“NO SECRET” will be displayed and 
blink. 
3. Press the SELECT button to alternate 
between “NO SECRET” and “SECRET” 
to select the desired mode. 
Q Press the MEMORY button. 
The...

To operate this system, after making program changes, set the System Program Switch located on the KX-T30810 
(Electronic Modular Switching System) to the SET position. 
When the unit is unused, the Liquid Crystal Display will show the month, day and the present time. 
Using the Handset ands-free 
NO. 
El 
LIFT THE PRESS THE 
PRESS PRESS THE TALK PRESS 
HANDSET DSS BUTTON 
“SP-PHONE” 
DSS BUnON “SP-PHONE” 
(11 through 18) 
(11 through 18) 
You may dial the extension number (11 through 18) instead of...

atic CC@SS 
r 
DIALTHE PHONE 
NUMBER TALK HANG UP OR 
PRESS “SP-PHONE”  LIFT THE HANDSET DIAL “9” WAIT FOR THE CO. 
ClR PRFSS DIAL TONE _ - . . “SP-PHONE” 
es 
Each extension can automatically select an idle 
CO (Central Ofice) Line within the KX- 
T30810. 
s Lift the handset or press the SP-PHONE 
button. 
. Dial (9). 
Dial tone from CO (Central Of/ice) will be 
heurd. 
I 
3. Dial the phone number. 
. Start talking. 
5. Hang up or press the SP-PHONE button 
upon completion of the conversation. 
s 
9...

LFITHEHANDSET 
DlAL8 DIALTHECO 
ORPRESS NUMBER 
SP-PHONE (1 through 3) 
SP-PHONE 
escr 
Any of the 3 CO Lines may be selected by dial 
access. 
Lift the handset or press the SP-PHONE 
Dial (8) and the CO number (1 through 3). 
Dial tone from CO (Central Office) will be 
heard. 
. Dial the phone number. 
. Start talking. , 
5. Hang up or press the SP-PHONE button. 
ne number dialed will be displayed on 
the LCD of the KX-T30830. 
Individual line access codes 
Dial 81 for CO 1 
Dial 82 for CO 2 
Dial 83...

Be sure the handset is in the cradle and the SP-PHONE button is OFF. 
Set the MEMORY switch 
of the KX-T30830, KX-T30820 or KX-T30850 to “PROGRAM”. 
PRESS DlAL9 DIALTHE 
PRESS PRESS PRESS 
PROGRAMMABLE PHONE PRESS 
MEMORY PROGRAMMABLE CLEAR 
FEATURE NUMBER 
FEATURE (TRANSFER)>> MEMORY 
You may dial 81 through 83 instead of 9. 
9 Each extension can automati- The TRANSFER button is used as the CLEAR 
button. 
cally select an idle CO line. 
81 through 83. Each extension can select a 
CO line designated. 
[9...