Panasonic Kx-T30810 Installation Manual

To enable 
LIFTTHE HANDSET 
OR PRESS 
“SP-PHONE” 
To cancel 
DIAL “751#” REPLACE THE 
HANDSET 
OR PRESS 
“SP-PHONE” WILL HEAR 
MUSIC 
LIFT THE HANDSET 
OR PRESS 
“SP-PHONE” DIAL “750#” REPLACE THE 
HANDSET 
OR PRESS 
“SP-PHONE” 
Music from an external source (e.g. radio) CNIZ 
be listened to on the built-in speaker of the 
telephone. 
I 
To enable 
1. Lift the handset or press the SP-PHONE 
button. When listening to the background music, the 
music will be interrupted by incoming calls, 
lifting handset...

To enable 
Be sure the SP-PHONE indicator is on. 
I 
Ii’ ‘I MUTE 
I I 
PRESS 
MUTE 
The MUTE indicator will flash. 
To cancel 
PRESS 
AGAIN 
Use when you do not want your voice to be 
heard by the other party. 
Be sure the SP-PHONE indicator is on. 
Press the MUTE button. 
The MUTE indicator @ill flash. 
To cancel 
Press the MUTE button again. 
The MUTE indicator will go 
out. 
s 
This feature can be activated in speakerphone 
mode only. To Program 
Set the MEMORY switch 
of the 
KX- T30830, KX- T30820...

Call Waiting-Outside Line 
WILL HEAR 
A CALL 
WAITING 
TONE PRESS CONSULT WITH PRESS CONSULT WITH 
“FLASH” THE NEW CALLER “FLASH” THE ORIGINAL 
WHILE THE CALLER WHILE 
ORIGINAL CALL THE 2ND CALL 
IS ON HOLD IS ON HOLD 
If the calling party on 
hold hangs up, the 
line is terminated. 
Allows extension user to access feutures of rhe 
centrul office or host PBX. (example: call 
waiting fearure can be supplied by central 
ofice. I 
11 Waiting-Outside Line 
. While having a conversatiot1, another party 
calls...

DIAL THE OlAl “x S” PHONE 
NUMBER DIAL THE 
PHONE 
NUMBER 
When the dialing mode is required to change a 
pulse mode to a tone mode in one dialing 
sequence, this feature is used. 
(e.g. computer-accessed long distance service ) 
. Dial the phone number. (pulse mode) 
. Dial (# #). 
3. Dial the phone number. (tone mode) 
s 
en you dial using this feature, yogi must use 
the line set to a pulse mode. 
Phone number after dialing “X #” will change 
to tone mode. 
Example: Computer-accessed long distance...

Switchinn To rone alerting 
NO. 
q 
LIFTTHEHANDSET PRESSTHE 
WAIT UNTILTHE 
ORPRESS 
SP-PHONE DSSBlJllON 
CONFIRMATION 
TONEISHEARD 
PRESS * RING BACK 
TONE 
“Voice alerting” (through built-in speaker) that 
is established at the called party’s extension, can 
be switched to “Tone alerting” (ringing). 
. Lift rhe handser or press the SP-PHONE 
brirrorl. 
. Press the DSS button or dial the extension 
number. 
f 
. Wait for cot@matiot~ lone after inter office 
calling. 
. Press rhe x butron. 
The ring back...

The elapsed time (from dialing to replacing 
handset) on originating outside calls will be 
displayed. 
s 
When intercom calls, the duration time of 
conversation is not displayed. 
“D URA TION” will be displayed. 
Refer to “Duration Time Count Start Mode” 
on page 2-25. 
ndset remains 
off hook or is disconnected 
at the other end, a reorder tone will be heard. 
When “Calling Party Control (CPC) Signal” 
mode is set to “DISABLE”, the reorder tone 
will not be heard. (see page z-28.) 
s 
The party whose...

To set call forwarding: To cancel: 
FWDiDND 
0 
FWD/LXUll 
El 
LIFTTHE HANDSET PRESS 
DIAL THE 
HANG UP OR LIFT THE HANDSET PRESS DIAL “0” 
HANG UP OR 
OR PRESS “FWD DNO” EXTENSION 
PRESS OR PRESS “FWD,OND” 
PRESS 
“SP-PHONE” 
NUMBER 
“SP-PHONE” “SP-PHONE” 
“SP-PHONE” 
All outside or intercom calls to your extension 
can be forwarded to another extension auto- 
matically, during your absence. 
1. Lift the handset or press the SP-PHONE 
button. 
2. Press the FWDIDND button 
3. Dial number 
of extension to...

The tone (busy tone or do not disturb tone 
erc.) rhe caller receives depends on the condi- 
tion of rhe forwarded extension. 
do t7oi disturb tone If exrension A is forwurdirq ~111 calls fo 
extension B and B is forwarding all calls to C, 
if any exrension culls A, they will be connected 
to C. (If you attempt to forward [I cull to u 
forwarding exrension, reorder tot7e is heard 
instead 
of confirmafion tone to preljetlt utl 
When at1 intercom call to the forwarding 
exrension is origitulted from the...

Setting 
LIFTTHEHANDSET 
ORPRESS 
SP-PHONE DIAL 731# 
To cancel 
I I I I LIFTTHEHANOSET DIAL 730# 
ORPRESS 
SP-PHONE 
L I HANGUPOR 
PRESS 
SP-PHONE 
I I 
HANGUPOR 
PRESS 
SP-PHONE 
Allows you to prohibit any other extension user 
from answering calls directed to you. 0 
Lift the handset or press the SP-PHONE 
button. 
2. Dial (731#). 
Wait for confirmation tone. “C.PICKUP 
DENY” will be displayed. 
3. Hang up or press the SP-PHONE button. 
To cancel, 
0 Lift the handset or press the SP-PHONE 
button. 
2....

Setting 
LIFTTHEHANDSET 
ORPRESS 
SP-PHONE 
FWWDND 
~ 
PRESS 
FWO/DNO DIAL 10 
HANGUPOR 
PRESS 
SP-PHONE 
LIFTTHEHANDSET 
ORPRESS 
SP-PHONE 
FWDlOND 
El 
PRESS 
FWD/DND DIAL 0 
HANGUPOR 
PRESS 
SP-PHONE 
Each extension can be individually pro- 
grammed from receiving outside or intercom 
calls. When “Do not Disturb” is entered, “Call 
Forwarding” will be cancelled, 
if entered. 
“Do not Disturb” does not prevent the exten- 
sion 
from recall for recalling for on-hold and 
camp-on. 
. Lift the handset or...