Panasonic Kx-T30810 Installation Manual

ect automatic switching mode for 
day/night service, enter a starting time. 
Refer to “Switching Mode (DaylNight Service)” 
page 2-10. 
. Dial (OS). 
“DAYINIGHT TIME” will be displayed. 
. 
Press the NEXT button. 
“DAY: 09:OO AM” 
will be displayed as a 
default value and “09” will blink. 
0 Enter a starting time for day service using 
2 digits. 
. Press the “13” button. 
“00” will blink. 
. Enter the minute using 2 digits. 
. Press the “0” button. 
“AM” will blink. 
7, Press the SELECT button to...

~----------‘--------- AB= ES-]: to assign the same on all 8 extensions 
1 :::I 
1 ~....~Ij 1, 2, 3. _ . . default (all 8 extensEons) 
[06] [NEXT] [iB] [C...El [MEMORY][END] 
;6] [NEXT] [NEXT] [C...E] [ 
,------until the desired extension number appears 
s 
Through programming, you can select which 
extensions may be used for outward dialing by 
using the day mode 
of opration. 
m Dial (06). 
“DAY: OUT CO” will be displayed. 
S Press the NEXT button. 
“ENTER EXT NO” will be displayed. 
3. Press the NEXT...

[07] [NEXT] [Ai31 [c...El [MEMORY] [END] 
;] [NEXT] [NEXT] [C...E] [MEMORY][END] 
I 
I...- until the desired extension number appears 
Through programming, you can 
select which 
extensions may be used for outward dialing by 
using the night mode of opration. 
“NIGHT: OUT CO” will be displayed. 
2. Press the NEXT button. ’ 
“ENTER EXT NO.” will be displayed. 
prompt entering extension number. 
3. Press the NEXT button. 
“11: CO 1, 2, 3” will be displayed and “1, 2, 
3” will blink. 
. Dial the CO numbers...

[08] [NEXP] [Ai3] [C...E] [MEMORY][END] 
[od8] [NEXT] [NEXT] [C...E] [MEMORY][END] 
~-------until the desired extension number appears 
s 
Through programming, you can select which 
extensions will ring on incoming calls from the 
Central Office during the day time. 
. Dial (08). 
“DAY: IN CO” will be displayed. 
. Press the NEXT button. 
“ENTER EXT NO” will be displayed. 
3. Press the NEXT button. 
“11: CO 1, 2, 3” will be 
displayed and “1, 2, 
3” will blink. 
. Dial the CO numbers to be entered. 
The...

[09] [NEXT] [Ai31 [C.. SE] [MEMORY] [END] 
[& [NEXT] [NEXTJ [C.. .E] [MEMORY] [END] 
L...... 
until the desired extension number appears 
Through programming, you can select which 
extensions will ring during the night time on 
incoming calls from the Central Ofice. 
1. Dial (09). 
“NIGHT: IN CO” will be displayed. 
2. Press the NEXT button. 
“ENTER EXT NO” will ‘be displayed. 
3. Press the NEXT button. 
“11: CO 1, 2, 3” will be displayed and “1, 2, 
3” will blink. 
, Dial the CO numbers to be entered....

i----- until the desired extension number appears 
hibit selected extensions from mak- 
ing long distance calls. 
Toll restriction can help eliminate telephone 
abuse and contribute to controlling telephone 
costs. 
There are four service 
of classes available for 
each extension. > “TOLL RESTRICTION” will be displayed. 
. Press the NEXT button. 
“ENTER EXT NO” will be displayed. 
2 
I I 
toll calls, international calls 
local calls 
4 
I I 
local calls international calls,  international calls, 
toll...

,,................-‘“‘ area code with 3 digits 
NOTSTORED . . . . default (all memory locations) 
(CLEAR) 
I 
[l l][NEXT][~~][~][MEMORY][END] 
or 
[l l][NEXT][MEXT][C][MEMORY][END] 
~--------until the desired memory location number appears 
For Service Class 3 (see “Toll Restriction- 
Class Assignment” on page 2-17.), up to IO 
area codes can be selected for use in toll dialing. 
All area codes except those entered will be 
denied. 
All estensions programmed for Service Class 
Selections 3 shall be...

‘. AB=[*]: to assign the same on all 8 extensions 
until the desired mode appears 
[12] [NEXT] [iB] [SELkT] [MEMORY] [END] 
or 
[12] [NEXT] [NEXT] [SELECT] [ME 
:-I--- until the desired extension number appears 
Through programming, you can select which 
extensions may be dialed Operator Call. 
For to deny all the dialing that start from “O”, 
set to DISABLE. 
I 
“OPERATOR CALL” will be displayed. 
s Press the NEXT button. 
“ENTER EXT NO” will be displayed. 
3. Press the NEXT button. 
“11: ENABLE” will...

up to four outside access codes each 
[13] [NEXT] [i] [A... [ 
When the system, KX-T30810, is installed 
behind a host PBX, the host PBX may require 
a pause time to access Central Ofice Lines. This 
feature enables the host PBX to automatically 
pause via programming the outward dialing 
access codes 
of the host PBX. 
. Repeat steps 3 to 5 to program each of the 
CO’s 
of the KX-T30810. 
7. To return to the initial program mode, press 
the END button. 
, 
“HOST PBX ACCESS” will be displayed. 
s Press...