Panasonic Kx Fpg176 Operating Instructions Manual

Remote Operation
61
Press 83to turn ON the pager call.
nTurning the pager call on or off
You must program a pager number beforehand 
(feature #70 on page 75).
Press 84to turn OFF the pager call.
lIf a pager number is not programmed, you
cannot turn this feature ON.
nReturning to TAD/FAX mode
1.Call your unit and wait for 10 rings.
lThe answering device will temporarily answer
the call.
2.Enter the remote operation ID during the
greeting message.
lYour unit will switch to TAD/FAX mode.
nChanging the...

Voice Mailbox
62
How callers can leave you private messages!
1
Call your unit from a remote touch tone telephone.
lThe TAD/FAX greeting message will be played.
2
Press *and the desired mailbox number (1or 2).
lAmailbox greeting message will be played.
3
After the beep, leave a message.
Note:
lIf the caller does not enter the mailbox number in step 2, the message will be recorded in the common
memory.
How incoming messages are recorded in a mailbox
This unit has two mailbox memories. Your caller can leave...

63
Voice Mailbox
Recording your own mailbox greeting 
messages!
The recording time is limited to 16 seconds for each mailbox.
Suggested message: 
“This is (personal name). Please leave your name and message after the
beep.”
1
Press p.
Display:
2
For mailbox 1:
Press #, then 55.
For mailbox 2: 
Press #, then 56.
3
Press +or -to select “RECORD”.
Example:
4
Press w.
Example:
5
Speak clearly about 20 cm (8 inches) away
from the microphone.
lThe display will show the remaining
recording time.
Example:
6
When...

64
Voice Mailbox
1
Press )2 times.
Display:
2
Press +or -until the desired mailbox
number is displayed.
Example:
/
3
Press LM
.
If you have programmed your own mailbox
password, enter it.
lOnly the new recorded messages will be
played.
lIf there are no new messages, the unit will
play back all the recorded messages.
4
Press {to end the operation.
PASSWORD=
PRESS
REC/ERASE/PLAY
NEW
_MESSAGES
MAILBOX2
_[±]
_02
MAILBOX[+
_-]
Note:
lThe following features can be used during
playback. See page 57 for...

65
Voice Mailbox
1
Press .
Example:
2
For mailbox 1:
Press *1.
For mailbox 2:
Press *2.
3
Enter the mailbox password (default setting “555”).
lThe voice guide will tell you the number of
new messages and they will be played
automatically.
lTo repeat only the new messages:
Press 4.
lTo listen to all the messages:
Press 5.
4
Press to end the operation. Remote
operation
11111v11111
PLAYBACK
Note:
lThe following features can be used during
playback. See page 58 for details.
– To repeat a message
– To skip a...

66
Option
Recording your own transfer greeting message!
The recording time is limited to 16 seconds.
Suggested message: 
“This is a transferred message from (your name, business and/or
telephone number). Please enter your remote ID for remote operation.”
To check the transfer greeting message
1.Press p,#61.
2.Press +or -to select “CHECK”.
3.Press w.
lThe unit will play the message.
4.Press p.
To erase your own transfer greeting
message
1.Press p,#61.
2.Press +or -to select “ERASE”.
3.Press w.
lYour own...

Features Summary
67
The unit provides various programming features. Program the desired settings by referring to the
programming tables (p. 68–75).
1
Press p.
Display:
2
Select the feature you wish to program.SYSTEM SET UP
PRESS NAVI.[
IH]
Programming!
SET
MENU
General programming method
Programming by entering the program code
number directly
You can select a feature by directly entering the
program code (# and 2-digit number) instead of
using (or )in step 2.
1.Press p
.
2.Press #and the 2-digit code...

Feature & Display
#01
Features Summary
68
Basic features!
Programming table
Code
Setting the date and time
SET DATE & TIME
PRESS SETSee page 15 for details.
See page 16 for details.
See page 18 for details.
“ERROR”: The sending report will
be printed only when fax
transmission fails. 
“ON”: The sending report will be
printed out after every transmission.
#02Setting your logo
YOUR LOGO
PRESS SET(Up to 30
characters)
SettingsHow the unit operates
#03Setting your facsimile telephone
number
YOUR FAX NO....

Feature & Display
Features Summary
69
CodeSettingsHow the unit operates
#13Setting the dialing mode
If you cannot dial, change the
setting depending on your
telephone line service.DIALING MODE
MODE=TONE[±]
TONE
PULSE
(The default setting is in bold type.)
“TONE”: For tone dial service.
“PULSE”: For rotary pulse dial
service.
You can select the ringer pattern. The
selected 
ringer patternwill sound
during setting.#17Setting the ringer pattern
RINGER PATTERN
MODE=A[±]
A
B
C
“VOX”: Unlimited
“1 MIN”: Up to...

Feature & Display
Features Summary
70
Advanced features!
How to set menu options
Programming table
Code
#22Setting the journal report to print
automatically
AUTO JOURNAL
MODE=ON[±]
ON
OFF
To send a document:
1.Insert the document.
2.Follow steps 1 and 2 above.
3.
Press +or -to select “ON”.
4.Press 
w.
5.Enter the fax number.
6.Press 
w.
7.Enter the transmission start time.
Press 
*to select “AM” or “PM”.
8.Press 
w.
9.Press 
p.
lTo cancel after programming,
press 
{then w.
“NEXTFAX”: This setting is...