Panasonic Kx Flm661 Operating Instruction Manual

10. Programmable Features
51
Changing the password for 
feature programming via 
remote operation
{#}{1}{5}{5}1.{Menu} i {#}{1}{5}{5} i {Set}
2.Enter the current password. i {Set}
LThe default password is “1234”.
3.Enter a new 4-digit password using 0–9. i {Set}
4.Enter the new password again. i {Set} i {Menu}
Note:
LIt is recommended that you change this password from the default 
password.
LThis password is also used for feature programming via web browser (KX-
FLM671, LAN connection only).
Setting the...

10. Programmable Features
52
Setting toner save feature
{#}{4}{8}{2}{0} “OFF” (default): Deactivates this feature.
{1} “ON”: The toner cartridge will last longer.
Note:
LThis feature may lower the print quality by reducing toner consumption.
Feature/CodeSelection 

10. Programmable Features
53
10.3 Fax features
Feature/CodeSelection
Printing a confirmation report
{#}{4}{0}{1}{0} “OFF”: Confirmation reports will not be printed.
{1} “ON”: A confirmation report will be printed after every fax transmission.
{2} “ERROR” (default): A confirmation report will be printed only when fax 
transmission fails.
Setting the journal report to 
print automatically
{#}{4}{0}{2}{0} “OFF”: The unit will not print a journal report, but will keep a record of the 
last 30 fax...

10. Programmable Features
54
Setting the Error Correction 
Mode (ECM)
{#}{4}{1}{3}This feature is available when the sending / receiving fax machines are ECM 
compatible.
{0} “OFF”: Deactivates this feature.
{1} “ON” (default): If there is an error during fax transmission / reception, the 
unit will support the communication.
Setting the connecting tone
{#}{4}{1}{6}If you often have trouble when sending faxes, this feature allows you to hear 
connecting tones: fax tone, ring back tone and busy tone. You...

10. Programmable Features
55
Receiving a fax into the 
computer
{#}{4}{4}{2}If you wish to receive a fax into the computer, activate this feature and run [PC 
FA X] from Multi-Function Station.
{0} “OFF” (default): Deactivates this feature.
{1} “ALWAYS”: If the unit recognizes the connection to the computer, it will 
transfer a received document to the computer. If the unit cannot recognize the 
connection, it will store a received document in the memory once, then transfer 
the data after recognition of...

10. Programmable Features
56
10.4 Copy features
10.5 PC print features
Feature/CodeSelection
Changing the default copy 
resolution
{#}{4}{6}{1}To change the default resolution setting for copying.
{1} “TEXT/PHOTO”: For documents containing both text and photographs.
{2} “TEXT” (default): For documents containing only text.
{3} “PHOTO”: For documents containing photographs, shaded drawings, etc.
Holding the previous N in 1 
setting
{#}{4}{6}{7}{0} “DISABLED” (default): Deactivates this feature.
{1}...

10. Programmable Features
57
10.6 Scan features
Feature/CodeSelection
Setting the scan mode for 
Push Scan
{#}{4}{9}{3}{1} “VIEWER” (default): The scanned image will be displayed in the [Multi-
Function Viewer] window.
{2} “FILE”: The scanned image will be saved as a file.
{3} “E-MAIL”: The scanned image will be saved for e-mail attachment.
{4} “OCR”: The scanned image will be displayed in the OCR window.
Holding the previous 
scanning parameter for Push 
Scan
{#}{4}{9}{4}{0} “DISABLED” (default):...

10. Programmable Features
58
10.7 LAN features (KX-FLM671 only)
Feature/CodeSelection
LAN setting with a DHCP 
server
{#}{5}{0}{0}{0} “DISABLED”: Deactivates this feature.
{1} “ENABLED” (default): The following will be allocated automatically using a 
DHCP (Dynamic Host Configuration Protocol) server.
– IP address
– Subnet mask
– Default gateway
Setting the IP address for the 
LAN connection
{#}{5}{0}{1}This feature is available when feature #500 is deactivated.
1.{Menu} i {#}{5}{0}{1} i {Set}
2.Enter...

10. Programmable Features
59
Setting HTTPD for the LAN 
connection
{#}{5}{3}{4}{0} “DISABLED”: Denies access to the web browser.
{1} “ENABLED” (default): Allows access to the web browser.
Feature/CodeSelection 

10. Programmable Features
60
10.8 Network features (KX-FLM671, LAN connection only)
These features can be programmed only by through the web browser interface.
Note:
LSee the following sections for details on these related features:
– Change password (feature #155 on page 51)
– DHCP mode (feature #500 on page 58)
– IP address (feature #501 on page 58)
– Subnet mask (feature #502 on page 58)
– Default gateway (feature #503 on page 58)
– DNS server #1 (feature #504 on page 58)
– DNS server #2 (feature #505...