Panasonic KX FLB758RU User Manual

6.2. PROGRAMMING AND LISTS
The programming function s are used to program the various features and function s of the machine, and to test the machine.
This facilitates communication between the user and the service man while programming the unit.
6.2.1. OPERATION
There are 2 basic categories of programming function s, the User Mode and the Service Mode. The Service Mode is further broken
down into the normal and special programs. The normal programs are those listed in the Operating Instructions and are...

6.2.3. SERVICE FUNCTION TABLE
CodeFunctionSet ValueEffectiveRangeDefaultRemarks
501Pause time setX 100 msec001~600030----------
502Flash timeX10ms01~9985----------
503Dial speed select1:10pps
2:20pps1, 21----------
520CED frequency select1:2100 Hz
2:1100 Hz1, 21See Symptom/Co untermeasure Table for long
distance and international calls in.
521International mode select1:ON 2:OFF1, 21See Symptom/Co untermeasure Table for long
distance and international calls in.
522Auto standby select1:ON 2:OFF1, 21The...

CodeFunctionSet ValueEffectiveRangeDefaultRemarks
717Transmit speed selection1: 33600BPS
2: 31200BPS
3: 28800BPS
4: 26400BPS
5: 24000BPS
6: 21600BPS
7: 19200BPS
8: 16800BPS
9: 14400BPS
10: 12000BPS
11: 9600BPS
12: 7200BPS
13: 4800BPS
14: 2400BPS1~141Adjusts the speed to start training during FAX
transmission. Refer to SOMETIME THERE IS A
TRANSMIT PROBLEM (P.118)
718Receive speed selection1: 33600BPS
2: 31200BPS
3: 28800BPS
4: 26400BPS
5: 24000BPS
6: 21600BPS
7: 19200BPS
8: 16800BPS
9: 14400BPS
10:...

6.3. TEST FUNCTIONS
The codes listed below can be used to perform simple checks of some of the unit’s function s. W hen complaints are received
from customers, they provide an effective tool for identifying the location s and causes of malfunctions.
Test ModeType of ModeCodeFunction
Operation after code input
MOTOR TESTService Mode“5”“ 5”“ 6”0: Recording paper feed
1: Auto Document feed (STANDARD)
2: Auto Document feed (FINE/SUPER FINE)
4: Carriage (STANDARD)
5: Carriage (FINE/SUPER FINE)
START
MODEM...

Test ModeType of ModeCodeFunction
Operation after codeinput
PRINT TEST
PATTERNService Mode“8”“ 5”“ 2”1. Press “852”then the SET key in the service mode.
2. As “PATNO = ”is displayed on the LCD, enter the test pattern No. and press
the SET key.
3. W hen “No. =“is displayed on the LCD, enter the printing number and press the
SET key. (Press “00”for the infinite printing.)
4. “MODE ”is displayed on the LCD. Press “0”to start printing or press “1”to go
to the next screen.
5. W hen “1”is pressed at MODE,...

 1. NO. 01
 2. NO.07
 3. NO.03
 4. NO.09
6.3.3. PRINT TEST PATTERN
76
KX-FLB75 8RU
Downloaded From ManualsPrinter.com Manuals 

6.4. REMOTE PROGRAMMING
If, after the call is connected, the customer describes the situation and it is determined that the problem can be corrected by
making parameter changes, this function makes it possible to change parameters such as the user code and service code from
another fax (using DTMF tones). Therefo re, travel to the customer´s location is not required. However, it is not possible to
change all the parameters remotely ( PROGRAM MODE TABLE(P.78)). The function used to accomplish this is...

6.4.2. PROGRAM MODE TABLE
CodeFunctionSet ValueDefaultRemoteSetting
001Set date and timedd/mm/yy hh:mm01/Jan/2003NG
002Your logo---------NoneNG
003Your fax telephone number---------NoneNG
004Transmission report mode1:Error / 2:ON / 3:OFFOFFOK
006FAX ring count1 to 9 rings2OK
012Remote TAM activationON/ID=11 / OFFOFFNG
013Dialing mode1:PULSE / 2:TONEPULSEOK
015PC INTERACE1:PARALLEL / 2:USBPARALLELNG
016Paper size1:LETTER / 2:A4 / 3:LEGALA4OK
017Ringer pattern1:A / 2:B / 3:CANG
022Auto journal print1:ON /...

CodeFunctionSet ValueDefaultRemoteSetting
815Sensor test------------------NG
852Print test pattern------------------NG
853Top margin1~53OK
854Left margin1~74OK
880History list1:Start---------NG
881Journal 2------------------NG
882Journal 3------------------NG
991Setup list1:Start---------OK
994Journal list1:Start---------OK
995Journal 2 list1:Start---------OK
996Journal 3 list1:Start---------OK
998History list1:Start---------OK
999Service list1:Start---------OK
OK means “can set ”.
NG means “can not set...

6.4.3. USER MODE (The list below is an example of the SYSTEM SETUP LIST the unitprints out.)
Note:
The above values are the default values.
80
KX-FLB75 8RU
Downloaded From ManualsPrinter.com Manuals