Panasonic KX FLB758RU User Manual

CROSS REFER ENCE:MOTOR SECTION (P.144)
111
KX-FLB75 8RU
Downloaded From ManualsPrinter.com Manuals 

6.5.9.2.1. ADF 6.5.9.2. SKEW
112
KX-FLB75 8RU
Downloaded From ManualsPrinter.com Manuals 

6.5.9.2.2. SCANNE R GLASS
6.5.9.3. THE SENT FAX DATA IS SKEWED
CROSS REFER ENCE:SKEW (P.112)
6.5.9.4. THE RECEIVED FAX DATA IS SKEWED
CROSS REFER ENCE:
SKEW (P.106)
113
KX-FLB75 8RU
Downloaded From ManualsPrinter.com Manuals 

6.5.9.5. THE RECEIVED OR COPIED DATA IS EXPANDED
6.5.9.6. BLACK OR WHITE VERTICAL LINE IS COPIED
114
KX-FLB75 8RU
Downloaded From ManualsPrinter.com Manuals 

6.5.9.7. AN ABNORMAL IMAGE IS COPIED
CROSS REFER ENCE:CIS (Contact Image Sensor) SECTION (P.148)
115
KX-FLB75 8RU
Downloaded From ManualsPrinter.com Manuals 

6.5.10. COMMUNICATION SECTION
Find the problem in the table shown below, and refer to the corresponding troubleshootin g procedure inDEFECTIVE
FACSIMILE SECTION (P.117).
No.SymptomContentPossible cause
1The paper dose not feed properly when faxing.
(Copying is also not possible.)TroubleshootingProblem with the feeding
mechanism.
(Refer toTRANSMIT PROBLEM
(P.117).)
2The fax transmits successfully one time and fails another.
(Copying is also possible.)TroubleshootingProblem with the service line or with...

6.5.10.1. DEFECTIVE FACSIMILE SECTION
6.5.10.1.1. TRANSMIT PROBLEM
CROSS REFER ENCE:WHITE PLATE AND SCANNER GLASS (P.33)
ADF (Auto document feed) SECTION (P.110)
OPERATION PANEL SECTION (P.140)
117
KX-FLB75 8RU
Downloaded From ManualsPrinter.com Manuals 

6.5.10.1.2. SOMETIME THERE IS A TRANSMIT PROBLEM
Note:“596: Transmit level set ”represents a service code. Refer to the SERVICE FUNCTION TABLE(P.72).
“ 717: Transmit speed select ”represents a service code. Refer to the SERVICE FUNCTION TABLE(P.72).
118
KX-FLB75 8RU
Downloaded From ManualsPrinter.com Manuals 

6.5.10.1.3. RECEIVE PROBLEM
Confirm the followin g before starting troubleshootin g. 
     · 
  
  Is the recording paper installed properly? Refer to the next page.
Note:
“596: Transmit level set ”represents a service code. Refer to the SERVICE FUNCTION TABLE(P.72).
“ 718: Receive speec select ”represents a service code. Refer to the SERVICE FUNCTION TABLE(P.72).
119
KX-FLB75 8RU
Downloaded From ManualsPrinter.com Manuals 

For the receiving problem , we have thought of causes other than in the software. Some causes may be when the fax changes
to the memory receiving mode (for example, when out of paper). and the memory becomes full of the unprinted fax data. In this
case, [MEMORY FULL] and its main cause (for example,“OUT OF PAPER ”) are displayed on the LCD. Accordingly, by solving
the main problem , [MEMORY FULL] can be cancele d and the receiving problem can solved. The causes of the display errors
are shown below....