Panasonic KX FLB758RU User Manual
Here you can view all the pages of manual Panasonic KX FLB758RU User Manual. The Panasonic manuals for Printer are available online for free. You can easily download all the documents as PDF.
Page 154
* This Adjustment should be done with a single High Voltage Board. * As for the High Voltage Probe, HV PROBE 9014 of HIOKI electric co. or the equivalent should be used. * As for the tester, FLUKE 85 III multimeter or the equivalent should be used. * Be careful not to touch the terminals during adjustment because the high voltage is used.154 KX-FLB75 8RU Downloaded From ManualsPrinter.com Manuals
Page 155
6.5.17. POWER SUPPLY BOARD SECTION 6.5.17.1. KEY COMPONENTS FOR TROUBLESHOOTING Check the followin g parts first: F101, D101-D104, C106, Q101, PC101 and IC101. This comes from our experience with experimental tests. For example: power supply and lightning surge voltage test, withstanding voltage test, intentional short circuit test, etc. Caution:If you find a melted fuse in the unit, do not turn on the power until you locate and repair the faulty parts (except for the fuse); otherwise the fuse will melt...
Page 156
6.5.17.2. TROUBLESHOOTING FLOW CHART 156 KX-FLB75 8RU Downloaded From ManualsPrinter.com Manuals
Page 157
6.5.17.3. BROKEN PARTS REPAIR DETAILS (D101~D104) Check for a short-circuit in terminal 4. If D101~D 104 is short-circuit, F101 will melt (open). In this case, replace all of the parts (D101~D104, F101). (Q101) The worst case of Q101 is a short-circuit between the Drain and Gate because damage expand s to the periphe ral circuit of Q101. This is due to a very high voltage through the Gate circuit which is composed of R109 and IC101. You should change all of the parts listed as follows. F101, Q101, R109,...
Page 158
6.6. PROBLEMS WITH PC SOFTWARE 6.6.1. GENERAL 158 KX-FLB75 8RU Downloaded From ManualsPrinter.com Manuals
Page 160
7 CIRCUIT OPERATIONS 7.1. CONNECTION DIAGRAM 7.1.1. CONNECTION DIAGRAM (1) 160 KX-FLB75 8RU Downloaded From ManualsPrinter.com Manuals