Panasonic KX FLB758RU User Manual

3.4.4.1. Adding Paper
1.
2.
3.Remove all of the installed paper.
Add paper to the stack of paper you removed and straighten.
Follow steps 1 to 4 above.
3.4.5. DOCUMENTS THE UNIT CAN FEED
3.4.5.1. USING THE ADF (AUTO DOCUMENT FEEDER)
Note: 
     · 
  
  Remove chips, staples or other similar fastene rs.
 
  
  · 
  
  Do not send the followin g types of documents. (Use the scanner glass for fax transmission.)
— Chemically treated paper such as carbon or carbonless duplica ting paper
— Electrostatically...

3.4.6. TO SELECT CHARAC TERS WITH THE DIAL KEYPAD
3.4.7. TO SELECT CHARAC TERS USING THE (+) OR (-) KEY
22
KX-FLB75 8RU
Downloaded From ManualsPrinter.com Manuals 

3.4.8. SETTING YOUR LOGO
The logo can be your company, division or name.
23
KX-FLB75 8RU
Downloaded From ManualsPrinter.com Manuals 

3.4.9. REPLACING THE TONER CARTRIGE AND THE DRUM UNIT
W hen the display shows the followin g, replace the toner cartridge.
W e recommend you replace the drum unit every third time you replace the toner cartridge.To check the drum life and quality,
please print the printer test list.
To ensure that the unit operates properly, we recommend the use ofPanason ic toner cartridge (Model No. KX-FA76A) and
drum unit (Model No. KX-FA78A) .
Caution:  
     · 
  
  The drum unit contains a photosensitive drum....

4.Tap on the used toner cartridge several times to allow the remaining
toner to fall into the drum unit. Remove the drum and toner unit by
holding the two tabs. 
     · 
  
  l If you replace the toner cartridge and the drum unit at the sam
time, skip to step 7.
5.Turn the two levers on the used toner cartridge firmly.
6.Pull up the right edge of the used toner cartridge ().
Remove the cartridge from the drum unit ().
 
     · 
  
  The toner may stick to the cartridge and the drum unit. Be
careful...

11.The toner cartridge is installed when the triangles match.
12.Install the drum and toner unit by holding the tabs. 
     · 
  
  If the lower glass is dirty, clean it with a soft and dry cloth.
13.Close the printer cover by pushing down on both sides until locked.Waste disposal method 
  
  · 
  
  W aste material may be dumped or incinerated under
conditions which meet all country and local environmental
regulations.
26
KX-FLB75 8RU
Downloaded From ManualsPrinter.com Manuals 

1Connec t the fax machine to the PC.
 
     · 
  
  To use via USB connection, you must set the cable type
to “USB” (feature #15) The default setting is
“ PARALLEL ”.
2 Start W indows 95/98/Me/NT4.0/2000 /XP and close all
applica tions.
 
     · 
  
  The followin g dialog box may appear. Click [Cancel]to
close it.
 
  
  · 
  
  You must be logged in as an administrator in W indows
NT4.0/2000/XP.
3 Insert the include d CD-ROM into your CD-ROM drive.
 
     · 
  
  The [Choose Setup Language] dialog box...

4 MAINTENANCE
4.1. MAINTENANCE ITEMS AND COMPONENT LOCATIONS
4.1.1. OUTLINE
MAINTENANC E AND REPAI RS ARE PERFO RMED USING THE FOLLOW ING STEPS .
 1. Periodic maintenance
Inspect the equipment periodically and if necessary, clean any contaminated parts.
 2.  Check for breakdowns
Look for problem s and conside r how they arose.
If the equipment can be still used, perform copying , self testing or communication testing.
 3.  Check equipment
Perform copying , self testing and communication testing to...

4.1.2.1. Maintenance List
NO.OPERATIONCHECKREMARKS
1Document PathRemove any foreign matter such as paper.—
2RollersIf the roller is dirty, clean it with a damp cloth then dry
thoroughly.Refer toMAINTENANCE CHECK
ITEMS/COMPONENT
LOCATIONS (P.28).DOCUMENT FEEDER
ROLLERS (P.35)
3SensorsDocument sensor (PS500), Paper feed sensor (PS501), Printer
cover open switch (SW 101),ADF cover open sensor (SW 501),
FB cover open sensor (SW 500), ADF CISposition sensor
(PS502),FB CIS position sensor (PS503)Resist sensor...

4.2. PRINTING
 
     · 
  
  The motor pinion rotates in the direction shown in the figure.
 
  
  · 
  
  The gears of fixing and develop ing parts are driven by the GEAR 1A.
 
  
  · 
  
  The GEAR PAPER FEED ROLLER drives the roller.
 
  
  · 
  
  The GEAR CLUTC H runs idle and GEAR PICKUP PAPER is still.
30
KX-FLB75 8RU
Downloaded From ManualsPrinter.com Manuals