Panasonic Kx Fl501c Operating Instruction Manual

11
Finding the Controls
Location!
QUICK SCAN START
MANUAL BROAD
SPEED DIRECTOR
To redial the last number 
dialed.
To insert a pause during 
dialing.
To store or edit names 
and telephone numbers 
(p. 22–25).
To change from pulse to tone temporarily 
during dialing when your line has rotary 
pulse services.
To dial without 
lifting the handset.
To access special 
telephone services 
such as call waiting 
or transferring an 
extension call.
To search for a stored name 
(p. 26, 33).
To select the...

12
Setup
Toner cartridge and drum unit!
Caution:
Read the instructions below before you begin installation. After you have read them, 
open the drum unit protection bag. The drum unit contains a photosensitive drum.
Exposing it to light may damage the drum. Once you have opened the protection bag:
—Do not expose the drum unit to light for more than 5 minutes.
—Do not touch or scratch the green drum surface.
—Do not place the drum unit near dust or dirt, or in a high humidity area.
—Do not expose the...

13
Setup
Toner save feature
If you want to save on toner consumption, set the toner save setting to on (feature #79 on page 59). The
toner cartridge will last approx. 40% longer. This feature may reduce print quality.
5
The toner cartridge is installed when
the triangles match.
Triangles
7
Push the front cover open button
then open the front cover. Front cover
Front cover
open button
8
Install the drum and toner unit by
holding the tabs.
If the lower glass is dirty, clean it with
a soft, dry cloth....

14
Setup
Note for installation:
Do not place the unit in an area where the paper tray may be obstructed by a wall, etc.
Document and recording paper will be ejected from the front of the unit. Do not place anything in front of
the unit.
Paper tray, document stacker and 
paper stacker!
Insert the paper tray into the two slots on the
back of the unit ( ). 
Let it lean back until it clicks into place ( ).
2
1
21
Paper tray
Paper tray
Align with the ribs on the document exit ( ).
Pull the document stacker...

15
Setup
Recording paper!
Note for recording paper:
Avoid using paper with a cotton and/or fiber content that is over 20%, such as letterhead paper or
paper used for resumes.
Do not use different types or thicknesses of paper at the same time. This may cause a paper jam.
Avoid extremely smooth or shiny paper that is highly textured. 
Avoid paper that is coated, damaged or wrinkled.
Note:
Avoid double-sided printing.
Do not use paper printed from this unit for double-sided printing with other...

16
Setup
Connections!
Handset cord
Telephone 
line cord
Connect to “LINE”.
Power cord
To the power 
outlet
(120 V, 60 Hz)
Power surge
protector(          )
Line surge
protector(         )
To the single 
telephone line
(CA11A)
1
Connect the handset cord.
2
Connect the telephone line cord.
3
Connect the power cord.
When the power is turned on for
the first time, the unit will print
some basic information.
Caution:
When you operate this product, the power outlet should be near the product and easily...

17
Setup
Date and time, your logo and facsimile
telephone number!
You should program the date and time, your logo and facsimile telephone number. This
information will be printed on each page transmitted from your unit.
Setting the date and time
Fax Correspondence
Your logoYour facsimile telephone numberDate and time
FROM : Panasonic FaxExample:FAX NO. : 1234567 Jan. 26 2001 09:02AM  P1
1
Press .
Display:
2
Press , then  .
3
Press .
Example:
Cursor
4
Enter the correct month/day/year by selecting
2 digits...

18
Setup
HANDSET MUTE
(Insert)
/MENUDisplay
(Hyphen)
FLASHSETSTOP
(Delete)
SPEED DIRECTOR
1
Press .
Display:
2
Press , then  .
3
Press .
4
Enter your logo, up to 30 characters, using
the dial keypad. See the next page for details.
Example:“Bill”
1.Press twice.
Cursor
2.Press six times.
3.Press six times.
4.Press  to move the cursor to the next
space and press  six times.
5
Press .
6
Press .MENU
SETUP ITEM [  ]
SET
LOGO=Bill
5
LOGO=Bil
5
LOGO=Bi
4
LOGO=B
2
LOGO=
SET
YOUR LOGO
02
SYSTEM SET UP
MENU
Setting...

19
Setup
1
2
3
4
5
6
7
8
9
0
FLASH
HANDSET
MUTE
STOP
Keys Characters
Hyphenbutton (To insert a hyphen.)
Insertbutton (To insert one character or one space.)
Deletebutton (To delete a character.)
key (To move the cursor to the left.)
key (To move the cursor to the right.)
To enter another character using the same number key, move the cursor to the next space.
1[ ] { }+–/=, ._` : ;?|
ABCa b c 2 
DE F d e f 3
GHIghi4
JKL j k l 5
MNOmno6
PQRS p q r s 7
TUV t u v 8
WXYZwxyz9
0( ) ! #$%&¥ @^ ’→
To select...

20
Setup
Setting your facsimile telephone number
1
Press .
Display:
2
Press , then  .
3
Press .
4
Enter your facsimile telephone number, up to 
20 digits, using the dial keypad.
Example:
5
Press .
6
Press .MENU
SETUP ITEM [  ]
SET
NO.=1234567
NO.=
SET
YOUR FAX NO.
03
SYSTEM SET UP
MENU
SET
(Hyphen)
FLASHSTOP
(Delete)
/MENUDisplay
SPEED DIRECTOR
Note:
You can enter your facsimile telephone number by
rotating  . If you use
, press  to move the cursor.
The  button replaces the digit with a “+” and the...