Panasonic Iris Reader Bm Et200 Operating Instructions

71
When your eyes are positioned within the capturing range, all the five
lamps will light up, the short electronic sound PiPi is heard, and your
eyes will be captured.
Keep your eyes opened widely during your iris image capturing.
It takes approx. 30 seconds (max.) for capturing.
Capturing is finished.
After capturing, the short electronic sound PiPi is heard.
The iris server will display the message to the system administrators or operators that
the user needs to retry capturing.
After your iris image...

72
Follow the directions of system administrators or operators to start iris
image capturing.
•The voice guidance will say, Please look into the mirror. Please open your eyes
wider.
•The distance indicator or voice guidance will start.
Position your eyes in the mirror by referring to How to Position Your
Eyes in the Mirror (p. 68).
Move your position slowly by following the distance indicator or voice
guidance.
•When the distance between the iris reader and you is too far, the voice guidance
will say,...

73
How to Carry Out Iris Reader Recognition
The following is how to control the iris reader when a user (you), whose iris data has been enrolled in the iris server, carries out
recognition. This document will explain about:
•Recognition by an iris reader only
After iris data enrollment, iris data recognition is carried out by an iris reader.
•Recognition by an iris reader and a card reader
After iris data enrollment, iris data recognition is carried out by an iris reader and a card reader. The card...

74
The recognition result is announced by a result indicator.
•When you are recognized as an enrolled user, accept will light up.
The voice guidance will say, Identification completed.
•When the recognition is invalid, reject will light up.
The voice guidance will say, Sorry you were not identified.
7
When your eyes are positioned within the capturing range, all the five
lamps will light up, and your eyes will be captured.
Keep your eyes opened widely during your iris image capturing.6accept reject...

75
Notes:
•If the recognition becomes invalid frequently, refer to Troubleshooting (p. 80).
•Depending on capturing conditions, it will take approx. 10 seconds between capturing and recognition. 
•The recognition result will be transferred to the access control panel, accompanied by the user information such as the ID
data, etc.
How to Carry Out PIN Recognition (For Use with Stand-Alone Mode Only)
When iris reader recognition is unavailable in the stand-alone mode, it is possible to carry out...

76
Press [7] [8] [9] [0] [enter].
•When the input is valid, the short electronic sound PiPi is heard.
•When the input is mistaken*, the voice guidance will say, Registration has been
failed., and the iris reader will return to the status before operation. 
4
accept reject
accept reject
How to Change PIN
It is possible to change the registered PIN using the numeric key.
Important:
•Avoid such password as is easily guessed by others.
•Only numerics (0 to 9) can be used for the PIN. Characters other than...

77
Press [7] [8] [9] [0] [enter] again.
•The voice guidance will say, “Registration has been completed.”
•When the input is mistaken*, the voice guidance will say, Registration has been
failed., and the iris reader will return to the status before operation. 
5
accept reject
accept reject
No.Procedure
* ID may be invalid, deleted, not registered, or the PIN recognition may be not allowed, etc. 

78
List of System Log Information
Code
0-00
0-01
0-02
0-03
0-04
0-05
0-06
0-07Details
Software download to reader is complete.
Download of Audio File is complete.
Operation information was updated.
Recognition Method was updated.
Network Information was updated.
Setup Time&Date is complete.
User Information was enrolled.
User Information was updated.Remarks
Saved when software download to reader is complete.
Saved when download of audio file is complete.
Saved when the operation information was updated....

79
Code Details Remarks
1-19 Recognition Method was updated. Saved when the Recognition Method was updated.
1-20 PIN was deleted. Saved when the PIN was deleted.
1-21 The Reader was started. Saved when the reader was started.
A-01,
A-07
A-16,
A-19A reader part may have failed. When the same alarm occurs even after supplying the power to the
iris reader again, contact the dealer with this error code.
A-08 The reader may be disconnected from the
Access Control Panel.Check if the power is supplied to the...

80
Keep your eyes opened as wide as you can
until the capturing process is completed.
You may have been above or
below the mirror.
When Enrollment/Recognition Becomes Invalid
When iris data enrollment/recognition becomes invalid or takes too much time, check to see the following.
If the trouble cannot be corrected even after checking and trying the remedy, refer to the system administrator.
You may not open your eyes
widely enough during captur-
ing.
You may have moved quickly
during capturing.If you...