Panasonic Iris Reader Bm Et200 Operating Instructions

							71
When your eyes are positioned within the capturing range, all the five
lamps will light up, the short electronic sound PiPi is heard, and your
eyes will be captured.
Keep your eyes opened widely during your iris image capturing.
It takes approx. 30 seconds (max.) for capturing.
Capturing is finished.
After capturing, the short electronic sound PiPi is heard.
The iris server will display the message to the system administrators or operators that
the user needs to retry capturing.
After your iris image has been captured, take your eyes off the mirror.
Wait until you can confirm the capturing result, as you may need to retry
the capturing.
Wait for the directions of system administrators or operators, as it will take approx.
10 seconds until the recognition result is output.
Follow the direction by the system administrators or operators.
6
7
8
9
10
No.Procedure
accept reject
How to Carry Out Enrollment (Stand-alone Mode)
The following is how to control the iris reader when your (the users) iris data is enrolled in the iris reader.
Notes:
•Follow the direction of system administrators or operators when you carry out enrollment.
•In some cases, you may need to retry capturing when enrolling your iris data.
Wait until you can confirm the capturing result.
•Depending on the settings by the system administrators, voice guidance (voice guidance and/or shutter sound) may not
be output.
accept reject
Stand (Sit down) in front of the iris reader.
Follow the directions of system administrators or operators.
If you are wearing glasses/sunglasses, take them off.
1
2
No.Procedure
accept reject 
						

							72
Follow the directions of system administrators or operators to start iris
image capturing.
•The voice guidance will say, Please look into the mirror. Please open your eyes
wider.
•The distance indicator or voice guidance will start.
Position your eyes in the mirror by referring to How to Position Your
Eyes in the Mirror (p. 68).
Move your position slowly by following the distance indicator or voice
guidance.
•When the distance between the iris reader and you is too far, the voice guidance
will say, Please move a little closer.
•When the distance between the iris reader and you is too short, the voice guidance
will say, Please move back a little.
When your eyes are positioned within the capturing range, all the five
lamps will light up, the short electronic sound PiPi will be heard, and
your eyes will be captured.
Keep your eyes opened widely during your iris image capturing.
Capturing is finished.
The short electronic sound “PiPi” is heard.
After your iris image has been captured, take your eyes off the mirror.
Carry out verification.
Follow the direction by the system administrators or operators.
After verification has been carried out, take your eyes off the mirror.
3
4
5
6
7
8
9
10
accept reject
accept reject
accept reject
accept reject
accept reject
No.Procedure 
						

							73
How to Carry Out Iris Reader Recognition
The following is how to control the iris reader when a user (you), whose iris data has been enrolled in the iris server, carries out
recognition. This document will explain about:
•Recognition by an iris reader only
After iris data enrollment, iris data recognition is carried out by an iris reader.
•Recognition by an iris reader and a card reader
After iris data enrollment, iris data recognition is carried out by an iris reader and a card reader. The card reader can be
used in the network mode only.
Notes:
•To carry out the recognition by an iris reader only, your iris data needs to have been sent to recognition iris readers,
enrolled in the iris server, or written into a card. If your iris data has not been enrolled, refer to system administrators for
enrollment.
•Depending on the settings by the system administrators, voice guidance may not be output.
Recognition by an Iris Reader
Stand (Sit down) in front of the iris reader.
Move your face so as your eyes are positioned within 50 cm {1.64 ft.}
from the iris reader.
•The voice guidance will say, Please look into the mirror.
•The distance indicator or voice guidance will start.
1
2
No.Procedure
accept reject
accept reject
Position your eyes in the mirror by referring to How to Position Your
Eyes in the Mirror (p. 68).
Move your position slowly by following the distance indicator or voice
guidance.
•When the distance between the iris reader and you is too far, the voice guidance
will say, Please move a little closer.
•When the distance between the iris reader and you is too short, the voice guidance
will say, Please move back a little.
When your eyes are positioned within the capturing range, all the five
lamps will light up, and your eyes will be captured.
Keep your eyes opened widely during your iris image capturing.
3
4
5
accept reject
accept reject
accept reject
The recognition result is announced by a result indicator.
•When you are recognized as an enrolled user, accept will light up.
The voice guidance will say, Identification completed.
•When the recognition is invalid, reject will light up.
The voice guidance will say, Sorry you were not identified.
6 
						

							74
The recognition result is announced by a result indicator.
•When you are recognized as an enrolled user, accept will light up.
The voice guidance will say, Identification completed.
•When the recognition is invalid, reject will light up.
The voice guidance will say, Sorry you were not identified.
7
When your eyes are positioned within the capturing range, all the five
lamps will light up, and your eyes will be captured.
Keep your eyes opened widely during your iris image capturing.6accept reject
Notes:
•If the recognition becomes invalid frequently, refer to Troubleshooting (p. 80).
•Depending on capturing conditions, it will take approx. 10 seconds between capturing and recognition.
•The recognition result will be transferred to the access control panel, accompanied by the user information such as the ID
data, etc.
Recognition by an Iris Reader and a Card Reader
Stand (Sit down) in front of the iris reader.
Follow the directions by system administrators or operators.
Pass a card through the card reader.
Note: If the card reader is a non-contact type, position the card close to the card read-
er.
Move your face so as your eyes are positioned within 50 cm {1.64 ft.}
from the iris reader.
The distance indicator or voice guidance will start.
Position your eyes in the mirror by referring to  How to Position Your
Eyes in the Mirror (p. 68).
Move your position slowly by following the distance indicator or voice
guidance.
•When the distance between the iris reader and you is too far, the voice guidance
will say, Please move a little closer.
•When the distance between the iris reader and you is too short, the voice guidance
will say, Please move back a little.
1
2
3
4
5
No.Procedure
accept reject
accept reject
accept reject
accept reject 
						

							75
Notes:
•If the recognition becomes invalid frequently, refer to Troubleshooting (p. 80).
•Depending on capturing conditions, it will take approx. 10 seconds between capturing and recognition. 
•The recognition result will be transferred to the access control panel, accompanied by the user information such as the ID
data, etc.
How to Carry Out PIN Recognition (For Use with Stand-Alone Mode Only)
When iris reader recognition is unavailable in the stand-alone mode, it is possible to carry out recognition by comparing the ID
and PIN (Personal Identification Number) entered from the optional numeric key.
Refer to p. 32 for details on available devices and connections.
•ID: 2-digit numbers that cannot be changed.
•PIN: 4-digit numbers that can be changed. (Refer to page 76.)
Important:
•Do not forget the ID and PIN. If you forget the ID or PIN, refer to the system administrators or users with the operators privi-
lege.
•Depending on the settings by the system administrators, voice guidance may not be output.
Note:If no operation has been performed for 30 seconds or more, the iris reader will return to the status before operation. In
this case, retry the operation.
The following is how to carry out the PIN recognition using the numeric key.
Note:When the [BS] key is pressed, operations performed since the [ENTER] key has been pressed last time can be can-
celed.
In the following example, ID is 12, and PIN is 3456.
Iris reader
Numeric key
0 1 4 7
clear
enter
, 2 5 8 =
. 3 6 9 /
+
–*
Press [/] [1] [2] [3] [4] [5] [6] [enter].
•When the input is valid, the voice guidance will say, Identification completed.
•When the input is invalid, the voice guidance will say, Sorry you were not identi-
fied.
•When the input is mistaken*, the voice guidance will say, Registration has been
failed.
1
No.Procedure
accept reject
accept reject
* ID may be invalid, deleted, not registered, or the PIN recognition may be not allowed, etc. 
						

							76
Press [7] [8] [9] [0] [enter].
•When the input is valid, the short electronic sound PiPi is heard.
•When the input is mistaken*, the voice guidance will say, Registration has been
failed., and the iris reader will return to the status before operation. 
4
accept reject
accept reject
How to Change PIN
It is possible to change the registered PIN using the numeric key.
Important:
•Avoid such password as is easily guessed by others.
•Only numerics (0 to 9) can be used for the PIN. Characters other than numerics (*, +, ., etc.) are unavailable.
•Depending on the settings by the system administrators, voice guidance may not be output.
Notes:
•If no operation has been performed for 30 seconds or more, the iris reader will return to the status before operation. In this
case, retry the operation.
•When the [BS] key is pressed, operations performed since the [ENTER] key has been pressed last time can be canceled.
In the following example, the password of User ID 12 is changed from 3456 to 7890.
Press [+] [1] [0] [enter].
•When the input is valid, the short electronic sound PiPi is heard.
•When the input is mistaken*, the voice guidance will say, Registration has been
failed., and the iris reader will return to the status before operation. 
Press [1] [2] [enter].
•When the input is valid, the short electronic sound PiPi is heard.
•When the input is mistaken*, the voice guidance will say, Registration has been
failed., and the iris reader will return to the status before operation. 
Press [3] [4] [5] [6] [enter].
•When the input is valid, the short electronic sound PiPi is heard.
•When the input is mistaken*, the voice guidance will say, Registration has been
failed., and the iris reader will return to the status before operation. 
1
2
3
No.Procedure
accept reject
accept reject
accept reject
accept reject
accept reject
accept reject 
						

							77
Press [7] [8] [9] [0] [enter] again.
•The voice guidance will say, “Registration has been completed.”
•When the input is mistaken*, the voice guidance will say, Registration has been
failed., and the iris reader will return to the status before operation. 
5
accept reject
accept reject
No.Procedure
* ID may be invalid, deleted, not registered, or the PIN recognition may be not allowed, etc. 
						

							78
List of System Log Information
Code
0-00
0-01
0-02
0-03
0-04
0-05
0-06
0-07Details
Software download to reader is complete.
Download of Audio File is complete.
Operation information was updated.
Recognition Method was updated.
Network Information was updated.
Setup Time&Date is complete.
User Information was enrolled.
User Information was updated.Remarks
Saved when software download to reader is complete.
Saved when download of audio file is complete.
Saved when the operation information was updated.
Saved when recognition method was updated.
Saved when the network Information was updated.
Saved when the setup of time & date is complete.
Saved when the user information was enrolled.
Saved when the user information was updated.
0-08 User Information was deleted. Saved when the user information was deleted.
0-09 Administrator Information was enrolled. Saved when the administrator information was enrolled.
0-10 Administrator Information was updated. Saved when the administrator information was updated.
0-11 Administrator Information was deleted. Saved when the administrator information was deleted.
0-12 Output Access Log to file is complete. Saved when the access log information is output to a CSV file. 
0-13 Delete All Access Log is complete. Saved when all the access log information is deleted.
0-14 Output System Log to file is complete. Saved when the system log information is output to a CSV file.
0-15 Delete All System Log is complete. Saved when all the system log information is deleted.
0-16 Backup of user information is complete. Saved when backup of user information is complete.
0-17 Restore of user information is complete. Saved when restore of user information is complete.
0-19 Backup of reader information is complete. Saved when backup of reader information is complete.
0-20 Restore of reader information is complete. Saved when restore of reader information is complete.
0-21 Logged in. Saved when an operator has logged in the setup menu.
1-00 PIN was updated. Saved when the PIN was updated.
1-01 Changed Reader to Administrator mode. Saved when a user has shifted from the recognition mode to the
administrator mode.
1-02 Changed Reader to Recognition mode. Saved when a user has shifted from the administrator mode to the
recognition mode.
1-03 Iris data was enrolled. Saved when the iris data was enrolled.
1-04 PIN was enrolled. Saved when the PIN was enrolled.
1-05 User information was deleted. Saved when the user information was deleted.
1-06 Gave the User Operators Privilege. Saved when the operator’s privilege was given to a user..
1-07 Deleted Operators Privilege from the User. Saved when the operator’s privilege was deleted from a user.
1-08 Guidance Mode of the reader was updated. Saved when the guidance mode of the reader was updated.
1-09 Audio Mode of the reader was updated. Saved when the audio mode of the reader was updated.
1-10 Setup Time&Date is complete. Saved when the setup of time & date is complete.
1-11 Output Access Log to file is complete. Saved when the access log information is output to a CSV file.
1-12 Delete All Access Log is complete. Saved when all the access log information is deleted.
1-13 Output System Log to file is complete. Saved when the system log information is output to a CSV file.
1-14 Delete All System Log is complete. Saved when the system log information is output to a CSV file.
1-15 Backup of user information is complete. Saved when backup of user information is complete.
1-16 Restore of user information is complete. Saved when restore of user information is complete.
1-17 Backup of reader information is complete. Saved when backup of reader information is complete.
1-18 Restore of reader information is complete. Saved when restore of reader information is complete. 
						

							79
Code Details Remarks
1-19 Recognition Method was updated. Saved when the Recognition Method was updated.
1-20 PIN was deleted. Saved when the PIN was deleted.
1-21 The Reader was started. Saved when the reader was started.
A-01,
A-07
A-16,
A-19A reader part may have failed. When the same alarm occurs even after supplying the power to the
iris reader again, contact the dealer with this error code.
A-08 The reader may be disconnected from the
Access Control Panel.Check if the power is supplied to the access control panel and the
iris reader and access control panel is properly connected.
A-09 The reader may be disconnected from the Card
Reader.Check if the power is supplied to the card reader and the iris read-
er and card reader is properly connected.
A-10 An unauthorized person may have accessed
the reader unit.An unauthorized person may have accessed the iris reader.
A-11 An unauthorized person may have accessed
the reader unit.A person may have accessed the iris reader with an improper item
instead of the person’s iris.
A-12 The reader unit may have been removed or the
cover may be open.Check if the iris reader is installed properly and if the cover is open.
A-13 The reader tamper-detection function has been
disabled.Check if the iris reader is installed properly and if the cover is open.
A-14 The reader clock may have failed. When the same alarm occurs even after supplying the power to the
iris reader again, contact the dealer with this error code.
A-15 An Option Board is Not Installed in the Iris
Reader.Check if the interface board is installed inside the iris reader.
A-17 Error in Card Reader settings. Check the settings of iris reader and card reader.
A-18 Error in Access Control Panel settings. Check the settings of iris reader and access control panel.
A-20 Software download may failed. Software download may have failed. Retry downloading software. 
						

							80
Keep your eyes opened as wide as you can
until the capturing process is completed.
You may have been above or
below the mirror.
When Enrollment/Recognition Becomes Invalid
When iris data enrollment/recognition becomes invalid or takes too much time, check to see the following.
If the trouble cannot be corrected even after checking and trying the remedy, refer to the system administrator.
You may not open your eyes
widely enough during captur-
ing.
You may have moved quickly
during capturing.If you move quickly, that may cause invalid capturing. Move slowly by following
the distance indicator or voice guidance.
Light has been reflecting on
the glasses.Light reflection may cause invalid recognition.
Move your face or the front panel upward or down-
ward to prevent the reflection. If you still cannot rec-
ognize yourself, take off your glasses/sunglasses.
Not preferable Preferable
Be sure to look directly at the mir-
ror right.
Check item
Not preferable
Preferable
Not preferable
Troubleshooting
Remedy