Panasonic Iris Reader Bm Et200 Operating Instructions

							51
Download Files [Download]
It is possible to download the reader software and audio file on this page.
The Download Software page has 2 tabs of the [Software] tab and the [Audio File] tab.
Download the Software
Click the [Software] tab on the Download page. (Refer to
pages 37 and 38.)
Perform software download on this page.
Step 1
Click the [Browse] button.
→The Choose file screen is displayed.
Step 2
Select the download file.
Select the ET200_****.bin file.
STEP3
Click the [Open] button.
→The selected file name is displayed in [Download
Software].
STEP4
Click the [Execute] button.
→Download is started.
Download the Audio File
Click the [Audio File] tab on the Download page. (Refer to
pages 37 and 38.)
Perform audio file download on this page.
Step 1
Click the [Browse] button.
→The Choose file screen is displayed.
Step 2
Select the download file.
Select the ET200_AUDIO_****.bin file.
STEP3
Click the [Open] button.
→The selected file name is displayed in [Download Audio
File].
STEP4
Click the [Execute] button.
→Download is started. 
						

							52
[Reader ID]
Enter the iris reader ID.
Default:1
[IP Address]
Enter the IP address of iris reader as nnn.nnn.nnn.nnn.
Available value for nnn: 0 to 255
Default:192.168.0.3
Note:“nnn.nnn.nnn.255” is unavailable.
[Subnet Mask]
Enter the subnet mask of iris reader as nnn.nnn.nnn.nnn.
Available value for nnn:0 to 255
Default:255.255.255.0
[*Gateway IP Address]
Enter the gateway IP address of iris reader as
nnn.nnn.nnn.nnn.
Available value for nnn: 0 to 255
Default:No setting
Configure the Settings Relating to Network [Network]
Click the [Network] tab on the Reader Setting page. (Refer to pages 37 and 38.)
Configure the settings relating to network on this page. 
						

							53
Operations from the Numeric Key (For Use with Stand-Alone Mode Only)
The following is how to operate iris reader using the numeric key.
Notes:
•Numeric key control is available by users with the operator’s privilege only.
•Refer to p. 32 for details on setting items.
•Surely shift to the administrator mode. This control is unavailable in the recognition mode.
•When the [BS] key is pressed, operations performed since the [ENTER] key has been pressed last time can be canceled.
•Numbers and characters with [ ] mean the keys of numeric key.
Shift from the Recognition Mode to the Administrator Mode
The following is how to shift from the recognition mode to the administrator mode.
Note:If no operation has been performed for 30 seconds or more, the voice guidance will say, Registration has been failed.,
and the iris reader will return to the recognition mode. In this case, retry the operation.
Shift from the Administrator Mode to the Recognition Mode
The following is how to shift from the administrator mode to the recognition mode. 
Note:If no operation has been performed for 30 seconds or more, the voice guidance will say, Registration has been failed.,
and the iris reader will return to the recognition mode. In this case, retry the operation.
Press [+] [0] [0] [enter].
The short electronic sound PiPi is heard.
Perform iris recognition by following the voice guidance or distance
indicator. (Refer to p. 73.)
•When you are recognized as an enrolled user, accept will light up for one second.
The voice guidance will say, This is administrator mode.
•When the recognition is invalid, reject will light up for one second.
The voice guidance will say, This mode is not allowed to operate.
1
2
No.Procedure
accept reject
accept reject
accept reject
Press [-] [0] [0] [enter] .
The voice guidance will say, “This is recognition mode.”1
No.Procedure
accept reject 
						

							54
Enroll the User Data
The following is how to enroll the iris data of a user.
Press [+] [0] [1] [enter].
The short electronic sound PiPi is heard.
Enter the ID (2-digit) of a user to enroll the iris data.
Example:When the ID is 01, press [0] [1] [enter].
The short electronic sound PiPi is heard.
Note:When the voice guidance says, Registration has been failed., the iris reader will
return to the status before operation. 
Perform iris recognition by following the voice guidance or distance
indicator. (Refer to p. 73.)
After capturing, the voice guidance will say:
•Image capturing completed.
•Only right eye image is captured.
•Only left eye image is captured.
Select verify or retry.
Verify the recognition result:
Press [0] [enter].
The voice guidance will say, Verifying iris data..
Capture the left eye:
Press [1] [enter].
Capture the right eye:
Press [2] [enter].
Capture the both eyes:
Press [3] [enter].
Verify the recognition result.
The voice guidance will say, Registration has been completed.
Notes:
•When the voice guidance says, Registration has been failed., retry Step 2.
•When the voice guidance says, “The same iris data already exists.”, the user is
already registered with different ID.
•When not verifying the recognition result, press [.] [enter].
1
2
3
4
5
No.Procedure
accept reject
accept reject
accept reject
accept reject
accept reject
accept reject
accept reject 
						

							55
Register the PIN
The following is how to register the PIN of user who has been already registered in the database.
Press [+] [1] [1] [enter].
The short electronic sound PiPi is heard.
Enter the ID (2-digit) of a user to register the PIN.
Example:When the ID is 01, press [0] [1] [enter].
The short electronic sound PiPi is heard.
Note:When the voice guidance says, Registration has been failed., the iris reader will
return to the status before operation. 
Enter the PIN (4-digit).
Example:When the PIN is 1234, press [1] [2] [3] [4] [enter].
The short electronic sound PiPi is heard.
Note:When the voice guidance says, Registration has been failed., the iris reader will
return to the status before operation.
Enter the PIN (4-digit) again.
Example:When the PIN is 1234, press [1] [2] [3] [4] [enter].
The voice guidance will say, “Registration has been completed.”
Notes:
•When you register the PIN of another user, repeat Step 2 to 4.
•When the voice guidance says, Registration has been failed., retry Step 2.
When finishing operation, press [.] [enter].
If no operation has been performed for 30 seconds or more, the voice guidance will
say, Registration has been failed., and the iris reader will return to the recognition
mode.
1
2
3
4
5
No.Procedure
accept reject
accept reject
accept reject
accept reject
accept reject
accept reject
accept reject
accept reject 
						

							56
Delete the PIN
The following is how to delete the PIN of user with the operator’s privilege.
Note:After the PIN is deleted, the PIN recognition becomes unavailable.
Give the Operators Privilege to Users
The following is how to give the operator privilege mode to a user. In advance, user registration by the web browser control is
required. (Refer to p. 42.)
Press [-] [1] [1] [enter].
The short electronic sound PiPi is heard.
Enter the ID (2-digit) of a user to delete the PIN.
Example:When the ID is 01, press [0] [1] [enter].
The voice guidance will say, “Registration has been completed.”
Notes:
•When you delete the PIN of another user, repeat Step 2.
•When the voice guidance says, Registration has been failed., retry Step 2.
1
2
No.Procedure
Press [+] [0] [2] [enter].
The short electronic sound PiPi is heard.
Enter the ID (2-digit) of a user to give the operator’s privilege
Example:When ID is 01, press [0] [1] [enter].
The voice guidance will say, Registration has been completed.
Notes:
•When you give the operator privilege mode to other users, repeat this step.
•When the voice guidance says, Registration has been failed., the iris reader will
return to the status before operation.
When finishing operation, press [.] [enter].
If no operation has been performed for 30 seconds or more, the voice guidance will
say, Registration has been failed., and the iris reader will return to the status before
operation.
1
2
3
No.Procedure
accept reject
accept reject
accept reject
accept reject
accept reject
accept reject
accept reject
3
When finishing operation, press [.] [enter].
If no operation has been performed for 30 seconds or more, the voice guidance will
say, Registration has been failed., and the iris reader will return to the status before
operation.accept reject 
						

							57
Press [–] [0] [2] [enter].
The short electronic sound PiPi is heard.
Enter the ID (2-digit) of a user to delete the operators privilege.
Example:When ID is 01, press [0] [1] [enter].
The voice guidance will say, Registration has been completed.
Notes:
•When you delete the operators privilege from other users, repeat this step.
•When the voice guidance says, Registration has been failed., the iris reader will
return to the status before operation.
When finishing operation, press [.] [enter].
If no operation has been performed for 30 seconds or more, the voice guidance will
say, Registration has been failed., and the iris reader will return to the status before
operation.
1
2
3
No.Procedure
accept reject
accept reject
accept reject
accept reject
Delete the Operaters Privilege from Users.
The following is how to delete the operators privilege from a user.
Delete a User
The following is how to delete a user.
No.Procedure
Press [-] [0] [1] [enter].
The short electronic sound PiPi is heard.
Enter the ID (2-digit) of a user to delete.
Example:When the ID is 01, press [0] [1] [enter].
The voice guidance will say, “Registration has been completed.”
Notes:
•When you delete another user, repeat Step 2.
•When the voice guidance says, Registration has been failed., retry Step 2.
1
2
accept reject
accept reject
accept reject
3
When finishing operation, press [.] [enter].
If no operation has been performed for 30 seconds or more, the voice guidance will
say, Registration has been failed., and the iris reader will return to the status before
operation.accept reject 
						

							58
Back up or Restore User Information
The following is how to back up or restore user information.
Notes:
•Before restoring user information, save a file as UserInfo.bin in the external storage device. If this file does not exist, it is
impossible to restore the user information.
•The name of file that is saved when backup is performed becomes UserInfo.bin.
No.Procedure
Press [+] [1] [2] [enter].
The short electronic sound PiPi is heard.
Connect an external storage device and a numeric key with the USB hub
to the iris reader.
Note:Before restoring user information, save a file as UserInfo.bin in the external stor-
age device.
1
2
accept reject
Output or Delete Log Information to a CSV File
The following is how to output or delete the access log or system log information to a CSV file.
Notes:
•Log information is saved in the CSV format. The file of access log information name becomes AccessLog_time and
date.csv, and the file of system log information name becomes SytemLog_time and date.csv
•time and date of file name is the time and date when the log is saved.
•Refer to p. 78 for details on log information.
No.Procedure
Press [+] [0] [6] [enter].
The short electronic sound PiPi is heard.
When outputting the log information to a CSV file, connect an external
storage device and a numeric key with the USB hub to the iris reader.
Enter one of the following.
Output the access log information to a CSV file:  Press [0] [enter].
Delete all the access log information:  Press [1] [enter].
Output the system log information to a CSV file:  Press [2] [enter].
Delete all the system log information:  Press [3] [enter].
The voice guidance will say, “Registration has been completed.”
Note:When the voice guidance says, Registration has been failed., retry Step 2. (If
the external storage device does not have the sufficient capacity, or if the storage
device is damaged, the file will not be output, and the voice guidance says,
Registration has been failed.)
1
2
3
accept reject
accept reject
accept reject
accept reject
accept reject
When finishing operation, press [.] [enter].
If no operation has been performed for 30 seconds or more, the voice guidance will
say, Registration has been failed., and the iris reader will return to the status before
operation.accept reject4 
						

							59
Enter one of the following.
Restore user information:
Press [0] [enter].
Back up user information:
Press [1] [enter].
The voice guidance will say, “Registration has been completed.”
Note:When the voice guidance says, Registration has been failed., retry Step 2. (If
the external storage device does not have the sufficient capacity, or if the storage
device is damaged, the file will not be output, and the voice guidance says,
Registration has been failed.)
3accept reject
accept reject
No.Procedure
4
When finishing operation, press [.] [enter].
If no operation has been performed for 30 seconds or more, the voice guidance will
say, Registration has been failed., and the iris reader will return to the status before
operation.
Back up or Restore Reader Setting
The following is how to back up or restore reader setting.
Notes:
•Before restoring reader setting, save a file as SystemInfo.bin in the external storage device. If this file does not exist, it is
impossible to restore the reader setting.
•The name of file that is saved when backup is performed becomes SystemInfo.bin.
No.Procedure
Press [+] [0] [7] [enter].
The short electronic sound PiPi is heard.
Connect an external storage device and a numeric key with the USB hub
to the iris reader.
Note:Before restoring reader setting, save a file as SystemInfo.bin in the external
storage device.
1
2
accept reject
Enter one of the following.
Restore reader setting: 
Press [0] [enter].
Back up reader setting:
Press [1] [enter].
The voice guidance will say, “Registration has been completed.”
Note:When the voice guidance says, Registration has been failed., retry Step 2. (If
the external storage device does not have the sufficient capacity, or if the storage
device is damaged, the file will not be output, and the voice guidance says,
Registration has been failed.)
3accept reject
accept reject
accept reject 
						

							60
Set the Time and Date
The following is how to set the time and date.
Set the Audio Mode
The following is how to set the Audio Mode.
Mute:There is no audio output.
Simple:An audio output of Identification completed or Sorry you were not identified is generated based on the result of
recognition.
Full:There are a voice guidance giving instructions such as Please move a little closer etc. as well as recognition results.
No.Procedure
Press [+] [0] [5] [enter].
The short electronic sound PiPi is heard.
Enter the time and date.
Example:
When setting 2006 January 1, 23:59,
Press [2] [0] [0] [6] [0] [1] [0] [1] [2] [3] [5] [9] [enter].
The voice guidance will say, Registration has been completed.
Note:When the voice guidance says, Registration has been failed., retry Step 2.
1
2
accept reject
accept reject
accept reject
No.Procedure
Press [+] [0] [4] [enter].
The short electronic sound PiPi is heard.
Enter one of the following.
Mute:
Press [0] [enter]
Simple:
Press [1] [enter]
Full:
Prres [2] [enter]
Note:When the voice guidance says, Registration has been failed., retry Step 2. If set
to mute, the voice guidance Registration has been completed. is not output.
1
2
accept reject
accept reject
accept reject
No.Procedure
4
When finishing operation, press [.] [enter].
If no operation has been performed for 30 seconds or more, the voice guidance will
say, Registration has been failed., and the iris reader will return to the status before
operation.accept reject