Panasonic Iris Reader Bm Et200 Operating Instructions

31
16. If necessary, connect the numeric key to the iris reader.
Remove the cover from the high speed serial interface,
and connect the USB cable of numeric key to the high
speed serial interface. The numeric key control is avail-
able in the stand-alone mode only.
17. Detach the protection film from the front panel.
The front panel is covered with the protection film for
preventing damage.
Be sure to detach the film after the installation process
of the iris reader.
High speed serial interface 

Web browser control Setting Item
32
Output setting of Output
1 (Recognized Signal)  Shift between recognition
mode ↔administrator
mode
Setting of operation/
recognition
Language setting of
voice guidance[Reader Setting] –
[Recognition Method]
[Reader Setting] –
[Operation Info.]OK
OKOK
OKOK
OK–
–
Audio Mode
(Mute, Simple, Full)
[Reader Setting] –
[Operation Info.]–OK–– [Reader Setting] –
[Operation Info.]OK OK OK– ––OK– Numeric key
OKAdministratorUsers with the oper-
ators privilegeUsers
Setup...

Web browser control Setting Item Numeric key AdministratorUsers with the oper-
ators privilegeUsers
Output width setting of
Output 1 (Recognized
Signal) [Reader Setting] –
[Operation Info.]–OK–– 
33
Register password and
iris data
Delete administrator
information
Change password Output setting of Output
2 (Rejected Signal) [Reader Setting] –
[Operation Info.]–OK––
Output width setting of
Output 2 (Rejected
Signal) [Reader Setting] –
[Operation Info.]–OK––
Live indicator setting [Reader Setting] –...

Web browser control
Reader software version
Download software
34
Connection and Setup Flow
Connection and setup are performed before the iris reader is used in the stand-alone mode
Detach the front cover from the iris reader. (Refer to p. 28.)
Make sure that the power is not supplied to the iris reader.1
No.Procedure
Perform the setup switch setting.
Set the operation mode to the stand-alone mode. (Refer to p. 21.)2
Outputs the access log
to a CSV file[Log] – [Access Log] OK OK OK– Setting Item
Log...

35
No.Procedure
Use a LAN cable to connect the setup PC and reader(s), and attach the front cover.
Lead the LAN cable out of the rear side or the cable hole of the bottom side. (Refer to p. 29.)
Supply the power to the iris reader.
Perform the following settings using the web browser on the PC.
•Register administrators. (Refer to p. 36.)
•Set up the users with the operator’s privilege. (Refer to p. 37.)
•Set up the operation information and recognition method. (Refer to p. 40.)
Turn off the power supply....

36
Registering Administrators
The following are descriptions of how to register administra-
tors in the stand-alone mode. In the stand-alone mode, reg-
istration of at least one administrator is required. In the fac-
tory default setting, there are no administrators. At the time
of initial setup, surely register an administrator. Up to three
administrators can be registered.
Reader ID: 1
IP Address: 192.168.0.3
Subnet Mask: 255.255.255.0
Gateway IP Address: No setting
Step 1
Start up the web browser....

37
Registering Users with the
Operator’s Privilege
Users with the operator’s privilege are registered after the
registration of administrators to use the iris reader in the
stand-alone mode.
When users with the operator’s privilege are registered, the
stand-alone mode (numeric key control) becomes avail-
able.
Refer to p. 32 for setting items that can be set by users with
operator’s privilege.
Step 1
Display User/Administrator page. (Refer to p. 36.)
Step 2
Click the [New] button.
→[User] tab is...

38
Step 3
Press the [Enter] key on the keyboard.
→Login page will be displayed.
Step 4
Enter [User ID] and [Password].
→Setup Menu will be displayed.
How to Operate the Setup Menu
Step 1
Click the desired button in the frame on the left of the win-
dow to display the respective setup menu.
Step 2
Complete each setting item displayed in the frame on the
right of the window.
When there are tabs at the top of the setup page displayed
in the frame on the right of the window, click the desired tab
to display...

39
About the Operation Window
[Reader Setting] button
[Time & Date] button
[Version] button
[Download] button
[User/Administrator] button
[Log] button
[Backup/Restore] button
[Reader Setting] button
Click this button to display the Reader Setting page.
The basic settings, recognition method settings, and the
network settings can be configured on the Reader Setting
page. (Refer to p. 40.)
[Time & Date] button
Click this button to display the Time & Date page.
The time and date setting can be configured...

40
Configure the Settings Relating to System [Reader Setting]
The basic settings, recognition method settings, and the network settings can be configured on this page.
The Reader Setting page has 3 tabs of the [Operation Info.] tab, the [Recognition Method] tab and the [Network] tab.
Configure the Settings Relating to Iris Reader Operation [Operation Info.]
Click the [Operation Info.] tab on the Reader Setting page.
(Refer to pages 37 and 38.)
Configure the basic settings relating to iris reader...