Panasonic Iris Reader Bm Et200 Operating Instructions

BM-ET200
rejectaccept
Iris Reader 
Operating Instructions 
Model No.  BM-ET200
Before attempting to connect or operate this product, 
please read these instructions carefully and save this manual for future use.
The model numbers in these Operating Instructions are given without suffix. 

2
The serial number of this product may be found on the bot-
tom of the unit.
You should note the serial number of this unit in the space
provided and retain this book as a permanent record of your
purchase to aid identification in the event of theft.
Model No.
Serial No.
WARNING:
• This apparatus must be earthed.
• To prevent fire or electric shock hazard, do not expose this
apparatus to rain or moisture.
• The apparatus should not be exposed to dripping or splashing
and that no objects filled with...

3
Important Safety Instructions
1) Read these instructions.
2) Keep these instructions.
3) Heed all warnings.
4) Follow all instructions.
5) Do not use this apparatus near water.
6) Clean only with dry cloth.
7) Do not block any ventilation openings. Install in accordance with the manufacturers instructions.
8) Do not install near any heat sources such as radiators, heat registers, stoves, or other apparatus (including amplifiers) that
produce heat.
9) Only use attachments/accessories specified by the...

4
Disclaimer of Warranty
IN NO EVENT SHALL MATSUSHITA ELECTRIC INDUSTRI-
AL CO,. LTD. BE LIABLE TO ANY PARTY OR ANY PER-
SON, EXCEPT FOR REPLACEMENT OR REASONABLE
MAINTENANCE OF THE PRODUCT, FOR THE CASES,
INCLUDING BUT NOT LIMITED TO BELOW:
(1) ANY DAMAGE AND LOSS, INCLUDING WITHOUT LIM-
ITATION, DIRECT OR INDIRECT, SPECIAL, CONSE-
QUENTIAL OR EXEMPLARY, ARISING OUT OF OR
RELATING TO THE PRODUCT;
(2) PERSONAL INJURY OR ANY DAMAGE CAUSED BY
INAPPROPRIATE USE OR NEGLIGENT OPERATION
OF THE USER;
(3)...

5
Network Security
As you will use this product connected to a network, your attention is called to the following security risks.
1. Leakage or theft of information through this product
2. Use of this product for illegal operations by persons with malicious intent
3. Interference with or stoppage of this product by persons with malicious intent
It is your responsibility to take precautions such as those described below to protect yourself against the above network
security risks.
• Use this product in a...

6
Important Safety Instructions ...............................................3
Limitation of Liability  ............................................................4
Disclaimer of Warranty  ........................................................4
Network Security  .................................................................5
Trademarks and Registered Trademarks  ...........................5
Preface ................................................................................7
System...

Iris Reader BM-ET200 is used in an access control system. The iris reader, which captures a users iris image, is available for
the following operation modes.
• Stand-alone mode: The iris reader can be used in the stand-alone operation.
• Network mode: Iris server is required to operate the iris server.
System Configuration of Stand-alone Mode
Note: Stand-alone Mode has not been evaluated by UL.
It is possible to enroll and recognize iris data by using this iris reader in the stand-alone operation....

*2The recognition time may differ depending on capturing conditions.
*3The iris reader captures the iris images of both eyes at the same time, but the iris data of each eye is enrolled separately.
Enrollment/recognition by one eye capturing is also available.
*
4Refer to BM-ES200 Operating Instructions
(supplied with Administration Software BM-ES200) for details on available cards and card writers.
*
5Capturing diagnosis is made by the administration software at the time of enrollment.
*6The user is...

9
Features
• Automatic guidance and recognition by voice guidance and distance indicator
When a user is within 50 cm {1.64 ft.} of the front of an iris reader, the voice guidance will start. Moving to the point where
the user can see both eyes in the mirror according to the voice guidance or distance indicator, the users iris images will
be automatically captured and the user will be recognized from the iris data. The recognition range of the iris reader is
between approx. 30 cm {0.98 ft.} and 40 cm...

10
Precautions
General safety requirement:
For Installation
Refer all work related to the installation of the apparatus to
qualified service personnel or system installers.
Consult an expert for help in evaluating load bearing
capacity of the installation surface and structure. If the sur-
face is not strong enough, the apparatus may fall down.
Refer to the apparatus specifications for weights.
To avoid fire or personal injury:
• Do not drop metallic parts through slots.
This could permanently damage the...