Panasonic Integrated Telephone System Kx Ts3282 Operating Instructions

 
11  
Preparation
 
For assistance, please call: 1-800-211-PANA(7262) 
Connecting Telephone Line Cords 
A maximum of eight KX-TS3282Ws can be connected in parallel. You can 
also connect KX-T3281W.
To use the intercom, you must connect the telephone line cord to the 
LINE1/2 telephone jack of the unit. 
•If another model telephone is connected to the KX-TS3282W except for 
KX-T3281W, the line indicators of this unit will not function for that telephone. 
To connect the units to individual two-line...

 
Installation 
12 
•If you re-connect the telephone line cord(s), confirm that all of the extension 
indicators light with the AC adaptor connected, then connect the telephone line 
cord(s). If all of the extension indicators do not flash, the extension number has 
been assigned to this unit and the number might be used for another unit on the 
same line. Erase the previously assigned number (p. 17), then connect the 
telephone line cord(s). Re-assign the number to the unit (p. 17).  
If you provide only...

 
13  
Preparation
 
For assistance, please call: 1-800-211-PANA(7262) 
If you provide only two single-line telephone jacks for the units, continue to 
wire them using optional Panasonic T-adaptors KX-J66. To order, call the 
accessories telephone number on page 3. 
•If you do not connect other extensions, you do not need to use a T-adaptor. 
Connect a 2-wire telephone line cord to the LINE1/2 telephone jack of the unit 
directly. 
To connect the units to two single-line telephone jacks 
DSL Internet...

 
Installation 
14 
Connecting a Communication Device 
After connecting the telephone line cord to a two-line telephone jack, you 
can connect a communication device (computer, modem, fax, answering 
machine, etc.) through this unit using the LINE2/DATA jack. 
•If the communication device is in use, use LINE 1 to make or answer other calls. 
Otherwise the communication device may not operate properly.
4-Wire Telephone
Line Cord  with
GREEN Plugs
Two-Line 
Telephone Jack 
(RJ14C)
LINE2/DATA LINE1/22-Wire...

 
15 
Preparation
 
For assistance, please call: 1-800-211-PANA(7262) 
Time and Date 
You can select 12-hour clock (AM/PM) or 24-hour clock by programming. 
Make sure that the handset is on the cradle, the AC adaptor is connected 
and the SP-PHONE/HEADSET indicator light is off. 
After the AC adaptor is connected, the display 
will show “ 
Set clock 
” for 60 seconds. 
•If the display exits the set clock menu, press  
[FUNCTION/EDIT], then scroll to “Set clock” by 
pressing [] or [].
1Press [] or [ENTER]...

Programmable Settings
16
4Enter the year using [] and [].
•You can select the year between 2000 
and 2099.
•You can also select the year entering the 
last 2-digits using the dialing buttons ([0] 
to [9]).
5Press [ENTER] (Save key).
•A beep sounds.
•The clock starts working.
•If 3 beeps are heard, the setting is not 
correct. Start again from step 2.
•The display will go to the extension 
number assigning menu as shown on the 
right if you had started programming 
within 60 seconds after plugging in the...

17
Preparation
For assistance, please call: 1-800-211-PANA(7262)
Assigning the Extension Number
Assign the extension number to the unit to use the intercom feature.
Make sure that the unit has been connected to other units (KX-TS3282W 
and/or KX-T3281W) in parallel (p. 11-13) before programming.
Make sure that the handset is on the cradle, the AC adaptor is 
connected and the SP-PHONE/HEADSET indicator light is off.
1Press [FUNCTION/EDIT].
2Scroll to “Assign EXT#” by pressing [] 
or [].
3Press [].
•The...

Programmable Settings
18
What the extension indicators mean
Memory card
Remove the memory card and use it as a name index for extensions.
Off The extension is not in use.
On The extension is in use.
Cover
Memory Card 

19
Preparation
For assistance, please call: 1-800-211-PANA(7262)
Programming Summary
You can program the following functions from the menu. After pressing 
[FUNCTION/EDIT], the main menu will be displayed first. If the main menu 
item has the sub-menu, it will be displayed. See the corresponding pages 
for function details.
Make sure that the handset is on the cradle, the AC adaptor is connected 
and the SP-PHONE/HEADSET indicator light is off.
During programming
•To select a desired function item, scroll...

Programmable Settings
20
Dialing Mode
If you have touch tone service, set to Tone. If rotary or pulse service is 
used, set to Pulse. Your phone comes from the factory set to Tone.
Make sure that the handset is on the cradle, the AC adaptor is connected 
and the SP-PHONE/HEADSET indicator light is off.
1Press [FUNCTION/EDIT].
2Scroll to “Dial setting” by pressing 
[] or [].
3Press [].
4Press [] at “Set dial mode”.
•The current setting is displayed.
5Select “Pulse” or “Tone” by pressing 
[] or [].
6Press...