Panasonic Hx Wa03 Owners Manual

							- 61 -
5Select the setting content using the SET button and 
press the SET button to set.
∫ About applicable mode indicator
In the recording menu, the Recording Mode that reflects the currently 
displayed setting is displayed.
C Applicable mode indicator
: Setting is applied to still picture and motion picture recording.
:  Setting is applied to still picture recording.
:  Setting is applied to motion picture recording.
To get back to the previous screenPress the MENU button.
To end the menu settingPress the MENU button several times.
 
						

							- 62 -
Using the Simple Menu
You can easily set the functions useful for recording.
1Press the MENU button. 
2Tilt the SET button to the left. 
3Select the   tab using the SET button, and press 
the SET button.
≥To return to the normal menu, select the   tab and press the SET 
button.
4Select from menu items using the SET button, and tilt 
the SET button to the right, or press the SET button.
5Select the setting content using the SET button and 
press the SET button to set.
≥Items other than those displayed on the simple menu are set to the 
default settings.
Menu items
REC MODE ( l94)
PICTURE SIZE ( l96)
CREATIVE CONTROL ( l83)
SCENE MODE ( l97)
BURST ( l87)
FLASH ( l102 )
MENU
SN 
						

							- 63 -
Select the menu.
Please refer to page 
39.
Opening the LCD monitor will switch from Standby Mode to Recording 
Standby Status in approximately 0.5 seconds (in Recording Mode only).
≥ When in Quick Start Standby Mode about 50% of the power used 
in recording standby mode is being consumed, so the recording 
time will be reduced.
≥ Set to Recording Mode. ( l38)
1 Select [QUICK START] with the SET button and press the SET 
button.
2 Select [ON] with the SET button and 
press the SET button.
3 Close the LCD monitor.
The status indicator  A flashes green and the 
unit goes into Quick Start standby mode.
≥ Pressing the power button  B for a short time will also set the status to 
Quick Start Standby Mode.
Basic
Using the Option Menu
[MENU]: ,  or   # desired setting
OPTION MENU 1
[CLOCK SET]
[QUICK START]
123
1

 
						

							- 64 -
4Open the LCD monitor.
The status indicator  A will turn off and switch 
to Recording Standby Status.
≥ If Quick Start standby mode has been set by 
pressing the power button for a short time, 
pressing any of the buttons on the unit will 
set the status to Recording Standby Status.
≥Quick Start Standby Status will be unlocked after approximately 5 
minutes and will switch to Standby Mode. If Quick Start Standby Mode 
is set during file transfer in Direct Mode ( l158) of the Eye-Fi card, the 
unit switches to Standby Mode in approximately 5 minutes after the 
completion of the file transfer.
≥ If [ECONOMY] ( l66) is activated and the device switches to Quick 
Start Standby Status automatically , pressing any button on the unit will 
switch to Recording Standby Status.
≥ Depending on the recording conditions and menu settings, time for 
Quick Start may be longer than 0.5 seconds.
≥ It may take some time for Automatic White Balance to adjust.
 
						

							- 65 -
Set the type and volume of operation sounds for the unit.
[ALERT SOUND]
[TURN ON/OFF]:
Sets the sound emitted when the unit is turned on/off. ([ON]/[OFF])
[RECORD BEEP]:
Sets the sound emitted when recording is started and stopped. 
([ON]/[OFF])
[SHUTTER]:
Sets the sound emitted when the   button is pressed. 
([OFF]/[A]/[B]/[C]/[D])
[KEY SW]:
Sets the sound emitted when the buttons (SET button, MENU button, 
etc.) are pressed. ([OFF]/[A]/[B]/[C]/[D])
[OPERATION VOL]:
Sets the volume of the operation sounds. ([1] to [7])
[ALL OFF]/[OPERATION SOUNDS ON]:
Sets all operation sounds on/off 
						

							- 66 -
Switch [ON] (Display) or [OFF] (No Display) of the date and time display, 
etc.
Set the standby time for the unit to switch to Standby Mode. (l36)
≥ The ECONOMY function will not work  when the Wi-Fi function is in 
use.
Sets the brightness of the LCD monitor of the unit (7 steps).
[DISPLAY]
[ECONOMY]
[BATTERY:REC]:Sets the time for which the unit is in the 
Recording Mode using the battery, before it 
goes into Standby Mode. 
([OFF]/[1 min]/[3 min]/[5 min]/[10 min])
[BATTERY:PLAY]:Sets the time for which the unit is in the 
Playback Mode using the battery, before going 
into Standby Mode. 
([OFF]/[1 min]/[3 min]/[5 min]/[10 min]/[30 min])
[AC:REC/PLAY]:Sets the time for which the unit is in the 
Recording/Playback Mode using the AC 
adaptor, before going into Standby Mode. 
([OFF]/[1 min]/[3 min]/[5 min]/[10 min]/[30 min]/
[60 min])
[BRIGHTNESS] 
						

							- 67 -
You can select the language on the screen display and the menu screen.
Returns the unit settings to the settings at the time of purchase.
≥Settings for [CLOCK SET], [LANGUAGE] and the double range zoom 
(  /  ) will not be changed.
Returns the Wi-Fi settings to the settings at the time of purchase.
≥ The Wi-Fi password is also deleted.
OPTION MENU 2
[LANGUAGE]
[TV OUTPUT]
[TV SYSTEM]:Please refer to page  148.
[TV ASPECT]:Please refer to page 147.
[HDMI]:Please refer to page 148.
[VIERA Link]:Please refer to page 149.
[INITIAL SET]
[RESET Wi-Fi SETTINGS]
2
HX-WA3HX-WA03
HX-WA30 
						

							- 68 -
Please be aware that if a medium is formatted, then all the data recorded 
on the medium will be erased and cannot be restored. Back up important 
data on a PC, disc, etc. (l191)
≥ To format the built-in memory, perform a format with the SD card 
removed.
Select [FORMAT] or [DELETE DATA] using the SET button and 
press the SET button.
≥ When selecting [DELETE DATA], please use the AC adaptor. When 
using the battery, [DELETE DATA] cannot be selected.
≥ Select [DELETE DATA] and perform a physical formatting of the SD 
card when the SD card is to be disposed/transferred.
≥ Select [DELETE DATA] and perform a physical formatting of the built-in 
memory when this unit is to be disposed/transferred.
≥Do not turn this unit off or remove the SD card, while formatting. Do not 
expose the unit to vibrations or shock.
This item is displayed only when an Eye-Fi card is inserted.
Please refer to page  155.
[FORMAT]
[FORMAT]:
A logical format is performed on the SD card or built-in memory.
[DELETE DATA]:
A physical format is performed on the SD card or built-in memory.
Use this unit to format media.
Formatting built-in memory is only available with this unit.
Do not format an SD card using any other equipment such as a 
PC. The card may not be used on this unit.
[Eye-Fi] 
						

							- 69 -
Creates or selects a recording folder (folder containing a recorded file). 
(SD card recording only)
≥Insert the SD card.
≥ Set to Recording Mode. ( l38)
1 Select [REC FOLDER] using the SET button and press the SET 
button.
2
(When creating a folder) Select [CREATE NEW FOLDER] using the SET button and press 
the SET button.
≥ The created folder is set as the recording folder.
(When selecting a folder) Select the folder number of the desired folder using the SET 
button and press the SET button.
≥You cannot select folders which have been created on other 
equipment or folders which already contain the maximum number 
of files.
OPTION MENU 3
[REC FOLDER]
3 
						

							- 70 -
When the SD card or built-in memory contains multiple folders, you can 
select a folder for playback.
≥Set to Playback Mode. ( l38)
1 Select [PLAYBACK FOLDER] using the SET button and press 
the SET button.
2 Select the folder to play back using the SET button and press 
the SET button.
≥ All the recorded files are displayed in the thumbnail screen, and yellow 
frame is displayed on the first file in the selected folder.
3 Select the file to playback using the SET button and press the 
SET button.
This function sets the file numbers when the card is exchanged or 
formatted.
[PLAYBACK FOLDER]
[FILE NO. CONT’D]
[ON]:File numbers are retained even when the card is 
exchanged or formatted.
[OFF]:File numbers are reset to start from [0001] when the 
card is exchanged or formatted.