Panasonic Hx Wa03 Owners Manual

							- 171 -
∫
When setting from the Wi-Fi setup menu
1Press Wi-Fi button. 
2Select [Wi-Fi SETUP] using the SET button and then 
press the SET button.
3Select [Wireless Settings] using the SET button and 
then press the SET button.
4Select blank row using the SET button and then 
press the SET button.
≥For information on how to delete wireless 
access points or change the search order of 
wireless access points, please refer to 
[Wireless Settings] on page  187.
5Select [SET] using the SET 
button and then press the SET button.
6Select [Manual Connection] using the SET button 
and then press the SET button.
7Select [Search for wireless network] or [Manual 
Setting] using the SET button and then press the SET 
button.
[Search for 
wireless network]:Allows you to search for wireless access 
points, select one, and set it. ( l172)
[Manual Setting]:Allows you to configure detailed settings by 
entering the SSID of the wireless access point 
you want to connect to. ( l173 )
Wi-Fi 
						

							- 172 -
∫
When connecting by [Search for wireless network]
1Select the wireless access point to be connected 
using the SET button and then press the SET button.
≥If you select [Refresh], you can search for wireless access points 
again.
≥ If an Encryption key (Password) is not set, the connection is complete 
and a message is displayed.
2(When there is an Encryption key (Password))
Select [INPUT] using the SET button and then press 
the SET button.
3Enter the Password using the SET button.
≥Select characters using the SET button and then press the SET button.
≥ When the SET button is tilted up/down several times, the password 
entry screen switches from alphabets (lower case) to alphabets (upper 
case) and then to symbols.
≥ When the entry is complete, select [ENTER] using the SET button and 
then press the SET button.
SET SET
SETSELECT
1/3Wireless Settings
MENU
MENU
MENU
z
y
xwvutsrqpo
ENTER
SPACE
DELETE
n
mlkjihgfedcba
0987654321 
						

							- 173 -
4(When there is an Encryption key (Password))
Select [NEXT] using the SET button and then press 
the SET button.
≥A message is displayed when the connection is complete.
∫ When connecting by [Manual Setting]
1Select [INPUT] using the SET button and then press 
the SET button.
2Enter the SSID of the wireless access point to be 
connected using the SET button
≥For details on how to enter characters, refer to page  172.
≥ When the entry is complete, select [ENTER] using the SET button and 
then press the SET button.
3Select [NEXT] using the SET button and then press 
the SET button.
4Select the desired Network Authentication method 
using the SET button and then press the SET button.
≥When [WEP] is selected, proceed according to step 6.
Confirming that the Wi-Fi connection is complete
 is displayed on the screen
When the preparations for the Wi-Fi function ( l162 ) and the Wi-Fi 
connection are complete, you can use the following functions: j[LINK TO CELL] ( l181 )
j [DLNA PLAYBACK] ( l185 )
Network authentication typeEncryption types that can be set
[Open]
[WEP]/[NONE]
[WEP] There is no setup of an encryption 
types.
[WPA-PSK]/[WPA2-PSK] [TKIP]/[AES] 
						

							- 174 -
5Select the desired Encryption method using the SET 
button and then press the SET button.
≥If you select [NONE], a message is displayed after completing the 
connection.
6(When selecting [WEP]/[TKIP]/[AES])
Select [INPUT] using the SET button and then press 
the SET button.
7Enter the Password using the SET button.
≥For details on how to enter characters, refer to page  172.
≥ When the entry is complete, select [ENTER] using the SET button and 
then press the SET button.
8Select [NEXT] using the SET button and then press 
the SET button.
≥A message is displayed when the connection is complete.
Confirming that the Wi-Fi connection is complete
 is displayed on the screen
When the preparations for the Wi-Fi function ( l162 ) and the Wi-Fi 
connection are complete, you can use the following functions:
j[LINK TO CELL] ( l181 )
j [DLNA PLAYBACK] ( l185 ) 
						

							- 175 -
≥Check the wireless access points instruction manual and settings when 
a saving wireless access point.
≥ The Encryption methods are [AES], [TKIP] and [WEP] in descending 
order of strength. We recommend you connect with the strongest 
possible Encryption method.
≥ If no connection can be established, the wireless access point’s radio 
waves may be too weak. Refer to “Messages” ( l214) and 
“Troubleshooting” ( l215) for details.
≥ Transmission speed may decrease, or may not be usable depending 
on the environment it is used in. 
						

							- 176 -
Connecting to the smartphone
Check if your smartphone is compatible with WPSjIf the smartphone is compatible with WPS:
Proceed to the following [Easy Connection (WPS)]
j If the smartphone is not compatible with WPS:
[Connecting by entering an SSID and Password]
1Press Wi-Fi button. 
2Select [Wi-Fi SETUP] using the SET button and then 
press the SET button.
3Select [Direct Connection] using the SET button and 
then press the SET button.
4Select [Change connection type] using the SET 
button and then press the SET button.
5Select [Easy Connection (WPS)] using the SET 
button and then press the SET button.
6Set the smartphone to WPS Mode.
[Easy Connection (WPS)]
Confirming that the Wi-Fi connection is complete
 is displayed on the screen
When the preparations for the Wi-Fi function ( l162 ) and the Wi-Fi 
connection are complete, you can use the following functions: j[LINK TO CELL] ( l181 )
Wi-Fi 
						

							- 177 -
1Press Wi-Fi button. 
2Select [Wi-Fi SETUP] using the SET button and then 
press the SET button.
3Select [Direct Connection] using the SET button and 
then press the SET button.
4Select the SSID displayed on this unit in the Wi-Fi 
setting of the smartphone.
5Enter the Password displayed on this unit into a 
smartphone.
≥Transmission speed may decrease, or may not be usable depending 
on the environment it is used in.
Connecting by entering an SSID and Password
Confirming that the Wi-Fi connection is complete
 is displayed on the screen
When the preparations for the Wi-Fi function ( l162 ) and the Wi-Fi 
connection are complete, you can use the following functions: j[LINK TO CELL] ( l181 )
Wi-Fi 
						

							- 178 -
Please refer to the operating instruction of the device in use for details 
about the setting of the wireless access point or smartphone.
If the Wi-Fi connection cannot be established
ProblemCheck points
It cannot connect 
to the wireless 
access point.
The wireless 
access point is not 
detected. (General)
≥
Turn ON the wireless access point.
≥ Approach the wireless access point and 
reconnect.
≥ If it takes time to complete the connection, 
the Wi-Fi connection will be aborted.
Reset the connection settings.
≥ Check how to connect to the wireless 
access point and how to set the security 
settings.
≥ Make sure the wireless access point is 
registered in this unit. ( l187 )
≥ The device may be unable to locate the 
wireless access point due to problems with 
the signal. Use [Manual Connection]. 
(l 170 )
≥ The Wi-Fi function will not work underwater.
(Easy Connection)
≥ Make sure the wireless access point is in 
the correct WPS standby mode.
≥ Make sure the PIN code has been correctly 
input.
(Manual Connection)
≥ Make sure the SSID and password have 
been correctly input.
≥ Check the Authentication method, 
Encryption type, and Encryption key 
(Password). 
						

							- 179 -
Radio waves of the 
wireless access 
point get 
disconnected.≥
The condition may improved by moving the 
location or changing the angle of the 
wireless access point.
≥ If you use another 2.4 GHz band device 
such as a microwave oven or cordless 
telephone nearby, you may interrupt the 
signal. Keep a sufficient distance from these 
types of devices.
The Wi-Fi 
connection is not 
possible between 
this unit and a 
smartphone. (Wireless Access Point Connection)
≥
Make sure the smartphone is properly 
connected to the wireless access point by 
checking the Wi-Fi settings of the 
smartphone.
≥ Make sure this unit and the smartphone are 
connected to the same wireless access 
point.
≥ Make sure the wireless access point is 
registered in this unit. ( l187 )
(Direct Connection)
≥ Make sure the smartphone is properly 
connected to this unit by checking the Wi-Fi 
settings of the smartphone.
≥ Make sure the SSID and password have 
been correctly input.
≥ Make sure the smartphone is not connected 
to the wireless access point. If it is 
connected to the wireless access point, 
change the Wi-Fi access point using the 
smartphone’s Wi-Fi set up.
It takes long time 
every time to 
connect to a 
smartphone. ≥
It may take longer time to connect 
depending on the Wi-Fi connection setting 
of the smartphone, but it is not a 
malfunction.
ProblemCheck points 
						

							- 180 -
This unit is not 
displayed in the 
Wi-Fi setting 
screen of the 
smartphone.≥
Try switching the ON/OFF of the Wi-Fi 
function in the Wi-Fi settings of the 
smartphone.
The Wi-Fi 
connection is 
disconnected 
immediately. ≥
If there is a setting for avoiding poor 
connections in the Wi-Fi setting menu of the 
Android device 4.0 or later version, turn it 
OFF.
ProblemCheck points