Panasonic Hx Wa03 Owners Manual

							- 141 -
≥Set to Playback Mode. ( l38)
1Select the menu.
2Using the SET button, select [DELETE SINGLE], 
[DELETE SELECTED], [DELETE ALL] or [DELETE 
FOLDER] and press the SET button.
∫ Deleting a single file
3(When [DELETE SINGLE] is selected in Step 2)
Select the file to delete using the SET button.
4Select [DELETE] using the SET button and press the 
SET button.
Deleting files using the playback menu
[MENU]:   # [DELETE]1 
						

							- 142 -
∫
Deleting selected files
3(When [DELETE SELECTED] is selected in Step 2)
Select the file to delete using the SET button and 
press the SET button.
≥  will appear on the selected file. To cancel, press the SET button 
again.
≥ You can continue selecting up to maximum of 100 files.
4Press the   button or the recording start/stop 
button.
≥A delete confirmation screen appears.
5Select [YES] using the SET button and press the SET 
button.
≥The selected files are deleted.
∫ Deleting all files
3 (When [DELETE ALL] is selected in Step 2)
Select [DELETE] using the SET button and press the 
SET button.
≥A delete confirmation screen appears.
4Select [YES] using the SET button and press the SET 
button.
≥All the files will be deleted.
∫ Deleting a folder
3 (When [DELETE FOLDER] is selected in Step 2)
Select the folder to delete using the SET button and 
press the SET button.
≥A delete confirmation screen appears.
4Select [YES] using the SET button and press the SET 
button.
≥A further confirmation screen appears. Select [YES] and press the SET 
button to delete the folder. 
						

							- 143 -
≥Files which cannot be played back (the thumbnails are displayed as 
) cannot be deleted.
≥ The deletion may take time if there are many files.
≥ If you delete scenes recorded on other products or still pictures 
conforming to DCF standard with this unit, all the data related to the 
scenes/still pictures may be deleted.
≥ When still pictures recorded on an SD card by other products are 
deleted, a still picture (other than JPEG) that cannot be played back on 
this unit may be erased.
≥ Files which are protected cannot be deleted. To delete a protected file, 
first remove the protection and then delete.
Protecting a file
Files can be protected so that they are not deleted by mistake.  (Even if 
you protect some files, formatting the media will delete them.)
≥ Set to Playback Mode. ( l38)
1Select the menu.
2Select the file you wish to protect using the SET 
button and press the SET button.
≥  appears. To cancel the selection, press the SET button again.
3Press the MENU button to complete the settings.≥Files set as protected will be displayed with   for the thumbnail of 1 
file or 8 files. ( l58)
[MENU]:  
# [PROTECT]
1 
						

							- 144 -
≥Always use the supplied AV cable.
≥ HDMI is the interface for digital devices. If you connect this unit to a 
HDMI compatible high-definition TV and then play back the recorded 
high-definition images, you can enjoy them in high resolution with high 
quality sound.
≥ Turn down the volume before connecting.
1Connect this unit to a TV.
Advanced (Playback)
Watching Video/Pictures on your TV
Confirm the terminals on your TV and use a cable compatible with 
the terminals. Image quality may vary with the connected terminals.
A High quality
1 HDMI 
terminal
2 Video 
terminal

 
						

							- 145 -
≥Check that the plugs are inserted as far as they go.
≥ Do not use any other AV cables except the supplied one.
≥ Connecting the AV cable in the wrong direction may cause damage to 
the USB/AV connector of the unit. If the connector has become 
damaged, it may not operate correctly, including failure to recognize 
the cable even if it has been connected.
≥ Always use a genuine Panasonic HDMI micro cable (RP-CHEU15: 
optional).
2Select the video input on the TV.≥Example:
Select the [HDMI] channel with an HDMI micro cable.
Select the [Video 2] channel with an AV cable.
(The name of the channel may differ depending on the connected TV.)
≥ Check the input setting (input switch) and the audio input setting on the 
TV. (For more information, please read the operating instructions for 
the TV.)
B
HDMI micro cable (optional)
≥ Be sure to connect to the HDMI terminal.
C AV cable (supplied)
D Turn the side with the symbol up to connect.
Picture quality
1 High-definition images when connecting to HDMI terminal
2 Standard images when connecting to video terminal
CablesReference items
B HDMI micro cable 
(optional) ≥
Connecting with an HDMI micro cable 
(l 148 )
≥ Playback using VIERA Link™ ( l149)
About the status indicator of the unit
≥While the unit is connected to a television, the status indicator lights 
up in orange.
≥ While the unit is accessing the SD card or the built-in memory, the 
status indicator illuminates in red. During access, do not disconnect 
the HDMI micro cable or remove the battery. 
						

							- 146 -
3Play back from the unit
≥The volume cannot be adjusted on the unit. Please adjust the volume 
on the TV.
≥ This unit does not output images and sound when using the Wi-Fi 
function.
≥ Setting the [TV SYSTEM] to [NTSC] will not display the screen of the 
unit during recording standby. ( l148 ) Please check on the TV screen 
instead.
≥ About the video output
The video output destination varies depending on the status of 
the unit.
≤: Output
—: No output
≥ Scenes recorded with   is displayed on the center of the screen in 
1/4 the size of the TV screen.
Connection 
cable Video output 
destination
TV 
SYSTEM  (
l148)
Recording ModePlayback 
ModeStanding  byRecording
AV cable 
(supplied) LCD monitor 
of the unit
NTSC —
≤—
PAL ≤
TV NTSC
≤
—≤
PAL —
HDMI micro 
cable 
(optional) LCD monitor 
of the unit
NTSC
—≤—
PAL
TV NTSC
≤—≤
PAL 
						

							- 147 -
∫
To watch images on a regular TV (4:3) or when both 
sides of the images do not appear on the screen
Change the menu setting to display the images correctly. (Check the TV 
setting.)
Example of images with a [16:9] aspect ratio on a regular TV (4:3)
≥If a wide-screen TV is connected, adjust the aspect setting on the TV. 
(Refer to the operating instructions of the TV for details.)
[MENU]:  
# [TV OUTPUT]  # [TV ASPECT] #  [4:3]
[TV ASPECT] setting
[16:9][4:3]
Refer to the following support site for information about 
Panasonic TVs with an SD card slot for playing back your 
pictures.
http://panasonic.net/
≥ For details on how to play back, please read the operating 
instructions for the TV.
2 
						

							- 148 -
Connecting with an HDMI micro cable
Select the desired method of HDMI output.
≥[AUTO] determines the output resolution automatically based on 
information from the connected TV.
If the images are not output on the TV when the setting is [AUTO], 
switch to the method [720p], [1080i] or [480p] which enables the 
images to be displayed on your TV. (Please read the operating 
instructions for the TV.)
TV format setting
Set the format of the video signal output from the USB/AV connector.[MENU]:  
# [TV OUTPUT]  # [HDMI] # 
[AUTO]/[720p]/[1080i]/[480p]
[MENU]:   # [TV OUTPUT]  # [TV SYSTEM]  # [NTSC] or [PAL]
[NTSC]:Outputs NTSC video signals.
[PAL]:Outputs PAL video signals.
2
2 
						

							- 149 -
≥Set to Playback Mode. ( l38)
1Select the menu.
≥If you are not using VIERA Link, set to [OFF].
2Connect this unit to a Panasonic TV compatible with 
VIERA Link using an HDMI micro cable. (
l144 )≥It is recommended to connect this unit to an HDMI terminal other than 
the HDMI1 if there are 2 or more HDMI input terminals on the TV.
≥ VIERA Link must be activated on the connected TV. (Read the 
operating instructions of the TV for how to set etc.)
≥ Always use a genuine Panasonic HDMI micro cable (RP-CHEU15: 
optional).
Advanced (Playback)
Playback using VIERA Link™
What is the VIERA Link (HDAVI Control™)?
≥VIERA Link™ is a new name for EZ Sync™.
≥ This function allows you to use your remote control for the 
Panasonic TV for easy operations when this unit has been 
connected to a VIERA Link compatible device using an HDMI micro 
cable (optional) for automatic linked operations. (Not all operations 
are possible.)
≥ VIERA Link is a unique Panasonic function built on an HDMI control 
function using the standard HDMI CEC (Consumer Electronics 
Control) specification. Linked operations with HDMI CEC compatible 
devices made by other companies are not guaranteed.
When using devices made by other companies that are compatible 
with VIERA Link, refer to the operating instructions for the respective 
devices.
≥ This unit supports “VIERA Link Ver.5” function. “VIERA Link Ver.5” is 
the standard for Panasonic’s VIERA Link compatible equipment. 
This standard is compatible with Panasonic’s conventional 
VIERA Link equipment.
[MENU]:   # [TV OUTPUT]  # [VIERA Link]  # [ON]
2 
						

							- 150 -
3Operate with the remote control for the TV.
∫ Other linked operations
Turning the unit off:
If you use the remote control for the TV to turn off the power, this unit also 
turns off.
Automatic input switching:
If you connect with an HDMI micro cable and then turn on this unit, the 
input channel on the TV automatically switches to this unit’s screen. If the 
TV’s power is in standby status, it will turn on automatically (if [Set] has 
been selected for the TV’s [Power on link] setting).
≥Depending on the HDMI terminal on the TV, the input channel may not 
switch automatically. In this case, use the remote control for the TV to 
switch the input channel.
≥If you are unsure whether or not the TV and AV amplifier you are using 
are compatible with VIERA Link, read the operating instructions for the 
devices.
≥ Available linked operations between this unit and a Panasonic TV is 
different depending on the types of Panasonic TVs even if they are 
compatible with VIERA Link. Refer to  the operating instructions of the 
TV for the operations that support on the TV.
≥ Operation is not possible with a cable that is not based on the HDMI 
standard.
(When selecting scenes) (When playing back)
A Display operation icons
B Cancel operation icons
