Panasonic Home Network_system_ Users Guide

Voicemail settings
Clearing the “new voicemail” notification
If the “new voicemail” notification remains displayed even if you have no new landline voicemail
messages, use this feature to clear the notification.
1 From the  [Home Network]  app home screen, tap  [Settings].
2 Tap  [Telephone Settings] .
3 Tap  [Remove Voicemail Notification]  ®  [Yes] .
Voicemail tone detection (certain models only) *1
This feature is used to display “new voicemail” notifications. Turn this feature on if you use your...

2Tap  [Telephone Settings] .
3 Tap  [Hub PIN] .
4 Enter the current PIN and then tap  [OK].
R The default PIN is “0000”.
5 Enter the desired PIN and then tap  [OK].
6 Enter the desired PIN again and then tap  [OK].
Model information
*1 This feature is available for the following hub model numbers. – KX-HNB600AZ
– KX-HNB600E
– KX-HNB600FR
– KX-HNB600G
– KX-HNB600HM
– KX-HNB600SA
– KX-HNB600TW
Landline settings
Important:
R Typically these settings do not need to be changed. If they are set improperly, the...

Model numberDefault settingKX-HNB600700 msKX-HNB600AZ100 ms (when [Country / Region]  is set to [Australia] )
600 ms (when  [Country / Region]  is set to [New Zealand] )KX-HNB600C700 msKX-HNB600E100 msKX-HNB600FR250 msKX-HNB600G200 msKX-HNB600HM600 ms (when [Country / Region]  is set to [Singapore] )
400 ms (when  [Country / Region]  is set to [Hong Kong] )
700 ms (when  [Country / Region]  is set to [Malaysia] )KX-HNB600LC700 msKX-HNB600ME100 msKX-HNB600SA100 msKX-HNB600TW600 ms
*3[Line Mode]  is...

1From the  [Home Network]  app home screen, tap  [Settings].
2 Tap  [Telephone Settings] .
3 Tap  [Country / Region] .
4 Select the appropriate setting and then tap  [OK].
R The hub restarts.
Model information
*1 This feature is available for the following hub model numbers. – KX-HNB600AZ
– KX-HNB600HM
Caller ID support
The hub is Caller ID compatible. Caller ID is a service provided by your landline phone service provider
which may require a subscription. Contact your landline phone service provider for...

Answering system features (overview)
The hub features a built-in answering system that can answer calls received on your landline after a
certain number of rings. When it answers a call, it plays a greeting message and can then record caller
messages. Messages are stored in the hub, and you can play them back even when you are away from
home. The answering system cannot answer calls when you are already talking on the landline.
Note:
R In order for the answering system to answer calls, the hub must be...

4Tap  [Answer on]  or [Answer off] .
Playing your messages
When the answering system has recorded new messages, 
 is displayed in the status bar (Android
devices only) and your mobile device’s notification feature displays a notification. To play back your
messages easily, tap the notification and then use the playback controls described below.
1 From the  [Home Network]  app home screen, tap  [Phone].
2 Open the  [More] screen.
3 Tap  [Connect to Answering Device] .
R Names of features and settings may...

The [Answering Device]  setting may be called  [Answering System].
3 Tap  [Greeting] .
4 Tap  [Record Greeting] .
5 Tap  [OK]  to start recording.
R Recording starts after the beep.
6 Tap  [Stop]  to stop recording and save your greeting message.
R Your greeting message is played back for confirmation.
Playing your greeting message
1 From the  [Home Network]  app home screen, tap  [Settings].
2 Tap  [Answering Device] .
R Names of features and settings may vary depending on your mobile device’s language...

First time setup
1 From the  [Home Network]  app home screen, tap  [Settings].
2 Tap  [Answering Device] .
R Names of features and settings may vary depending on your mobile device’s language settings.
The  [Answering Device]  setting may be called  [Answering System].
3 Tap  [New Message Alert] .
4 Tap  [Outgoing Call] .
5 Turn on the  [Outgoing Call]  switch.
6 Enter the desired name and phone number, and then tap  [OK].
R You can also select a contact that is stored in your mobile device by tapping...

6Tap  [OK] .
R The phone number used for new message alert must be entered in order to turn this feature on.
Changing the phone number used for new message alert
1 From the  [Home Network]  app home screen, tap  [Settings].
2 Tap  [Answering Device] .
R Names of features and settings may vary depending on your mobile device’s language settings.
The  [Answering Device]  setting may be called  [Answering System].
3 Tap  [New Message Alert] .
4 Tap  [Outgoing Call] .
5 Edit the name and phone number, and...

Play new messagesPlay all messagesStop playback
Start voice guidance *2Turn answering system offTurn new message alert off *3Erase message (during playback)Erase all messagesEnd remote operation and end call
*1 If pressed within the first 5 seconds of playback, the previous message is played.
*2 Available for the following models only. – KX-HNB600 (when Spanish is selected as the voice prompt language)
– KX-HNB600LC
– KX-HNB600ME
*3 Available for 10 seconds after listening to new messages.
All other...