Panasonic Home Network System Faq Information
Here you can view all the pages of manual Panasonic Home Network System Faq Information . The Panasonic manuals for Wireless Network are available online for free. You can easily download all the documents as PDF.
Page 41
Q u e stion A n s wer W hat is the operating temperature spec of the window/door sensor? - 10 ° C – 40 ° C (14 ° F – 104 ° F) How many window/door sensors can be registered to the Hub? A total of 50 sensors can be registered to the Hub including other sensors( ex,M otion sensor), Smart Plugs and sirens W hat type of technology is used in the window/door sensor? M agnet detection by reed switch W hy are the notifications from the window/door sensor not received?...
Page 42
![Page 42
Qu estion Answer
I12 [1] How do I properly install
a W indow/door sensor? Follow the below steps to properly install a door sensor.
Temporary placement process
Confirming proper operation
Installation
Testing the sensor after installation
Temporary Placement
Before installing the w indow /door sensor, temporarily place it in the desired location and confirm that it
operates properly by pressing [ C].
Important:
1. Attach the sensor unit to the outer frame of the w indow...](http://img.usermanuals.tech/thumb/58/66634/w300_home_network_faq_d-41.png "Page 42
Qu estion Answer
I12 [1] How do I properly install
a W indow/door sensor? Follow the below steps to properly install a door sensor.
Temporary placement process
Confirming proper operation
Installation
Testing the sensor after installation
Temporary Placement
Before installing the w indow /door sensor, temporarily place it in the desired location and confirm that it
operates properly by pressing [ C].
Important:
1. Attach the sensor unit to the outer frame of the w indow...")
Qu estion Answer I12 [1] How do I properly install a W indow/door sensor? Follow the below steps to properly install a door sensor. Temporary placement process Confirming proper operation Installation Testing the sensor after installation Temporary Placement Before installing the w indow /door sensor, temporarily place it in the desired location and confirm that it operates properly by pressing [ C]. Important: 1. Attach the sensor unit to the outer frame of the w indow...
Page 43
![Page 43
Qu estion Answer
I12 [2] How do I properly
install a W indow/door
sensor? Option 1 - Securing with Screws
1. Remove the covers from each unit.
• Lift from the indented area (1) and open the sensor unit cover (2).
2. Sensor unit: Attach the sensor unit.
(A) Screws
(B) 86.2 mm (3 25/64 inches)
M agnet unit:
Attach the magnet unit.
(C) Screws
(D) 24.4 mm (31/32 inches)
3. Attach the covers.
Important:
• (E) Align the " ►
" marks on the sensor unit and the magnet unit...](http://img.usermanuals.tech/thumb/58/66634/w300_home_network_faq_d-42.png "Page 43
Qu estion Answer
I12 [2] How do I properly
install a W indow/door
sensor? Option 1 - Securing with Screws
1. Remove the covers from each unit.
• Lift from the indented area (1) and open the sensor unit cover (2).
2. Sensor unit: Attach the sensor unit.
(A) Screws
(B) 86.2 mm (3 25/64 inches)
M agnet unit:
Attach the magnet unit.
(C) Screws
(D) 24.4 mm (31/32 inches)
3. Attach the covers.
Important:
• (E) Align the \" ►
\" marks on the sensor unit and the magnet unit...")
Qu estion Answer I12 [2] How do I properly install a W indow/door sensor? Option 1 - Securing with Screws 1. Remove the covers from each unit. • Lift from the indented area (1) and open the sensor unit cover (2). 2. Sensor unit: Attach the sensor unit. (A) Screws (B) 86.2 mm (3 25/64 inches) M agnet unit: Attach the magnet unit. (C) Screws (D) 24.4 mm (31/32 inches) 3. Attach the covers. Important: • (E) Align the " ► " marks on the sensor unit and the magnet unit...
Page 44
Qu estion Answer J1 W hat is the operating temperature spec of the Smart Plug sensor? 0 ° C – 40 ° C (32 ° F – 104 ° F) 20% – 80% relative air humidity (dry) J2 How many smart plugs (KX - HNA101) can I connect to the KX - HNB600 Hub? You can have up to 50 smart plugs (model KX - HNA101). However if you are adding window and door sensors, (model KX - HNS101) and/or motion sensors (model KX - HNS102) as well, the total of all combined is 50. J3 Is the system secured...
Page 45
![Page 45
Qu estion Answer
J12 How do I register
additional smart plugs
(KX - HNA101) to the Hub
(KX - HNB600) You can register each device by using the registration buttons or the [Home Network] app.
(This procedure is not required for devices that were included as part of a bundle)
Using registration buttons
1. Hub: Press and hold [ C OTHER DEVICE] until the LED indicator blinks in green.
2. Smart plug: Press and hold [ C ] until the LED indicator blinks in green.
・
W hen...](http://img.usermanuals.tech/thumb/58/66634/w300_home_network_faq_d-44.png "Page 45
Qu estion Answer
J12 How do I register
additional smart plugs
(KX - HNA101) to the Hub
(KX - HNB600) You can register each device by using the registration buttons or the [Home Network] app.
(This procedure is not required for devices that were included as part of a bundle)
Using registration buttons
1. Hub: Press and hold [ C OTHER DEVICE] until the LED indicator blinks in green.
2. Smart plug: Press and hold [ C ] until the LED indicator blinks in green.
・
W hen...")
Qu estion Answer J12 How do I register additional smart plugs (KX - HNA101) to the Hub (KX - HNB600) You can register each device by using the registration buttons or the [Home Network] app. (This procedure is not required for devices that were included as part of a bundle) Using registration buttons 1. Hub: Press and hold [ C OTHER DEVICE] until the LED indicator blinks in green. 2. Smart plug: Press and hold [ C ] until the LED indicator blinks in green. ・ W hen...