Panasonic Home Network System Faq Information

Qu estion Answer
B3 How do  I  register additional 
Android  mobile  device to  the 
Hub KX - HNB600? After you have used your  mobile  device to  perform the initial  setup procedure, you can 
add other  mobile  devices to the system  (up to 8 in  total).
Before following  this  procedure, make sure you have completed  the Initial  Setup 
procedure.
1. Using  the mobile  device that you  want to register, download  the [Home 
Network ] app and then start the app.
2. Accept  the Terms  of  Use.
3. Tap...

Ques tion Answer
B6 W hy do I  need to create 
password during  setup? 1)  This  password will  be required when  you access  to the system outside  of  your home 
W i - Fi  network. 
2) This  password will  also be required when  adding other mobile  devices to the system.
B7 How do  I  reset the  Hub and 
re - start the initial  setup? 1) Disconnect  the AC  adaptor from  the Hub.
2) W hile  pressing the W i - Fi  SETUP  button  on  the rear of the Hub and the CAM ERA  and 
OTHER  DEVICE  buttons  on...

Que stion Answer
C1 W hich  mobile  devices are 
supported? 1)  iPhone® 4  or later,  iPad® ,  or iPad mini  (iOS 6.0  or later)
2)  Android™  device (Android 4.0  or later)
C2 W here can I  download  the 
app? Search for "Panasonic  Home  Network System" 
Android  - G oogle play 
iOS  - App store 
OR
Android:                                                               
https:// play.google.com/store/apps/details?id=com.panasonic.psn.andr oid.hmdect
iOS :...

Que stion Answer
C14 How do  I  register a Login 
password for  the Home 
Network App? 1.  From  the Home Network app home  screen, tap [Settings].
2.  Tap  [G eneral].
3.  Tap  [Change  Login  Password].
4.  Enter  the desired password and then  tap [OK].
5.  To  display the characters that  you have entered, turn  on  the [Show  Password] 
checkbox .
- The  password  must  be at least 8 characters  long.
6.  Tap  [OK].
C15 I  can not  remember the 
names I  assigned  to my 
sensors  and smart plugs,...

Qu estion Answer
D1 How many  digital cordless 
handsets  (KX - HNH100)  can I 
connect  to  the KX - HNB600 
Hub? You  can have a total of  6 handsets, model  KX - HNH100.
D2 W hat is  AM R/DISARM   button 
on  the handset used for? This  is  a dedicated button  to change the  mode to “Arm:  At Home”,  “Arm: Away” and 
“Disarm”  easily.
D3 How do  you adjust  the Alert 
volume  on  the handset? You  can adjust  the alert volume  heard during  "At Home" mode and "Away" mode by 
pressing...

Question Answer
D11 I  am getting an error  message 
on  telephone handset  KX -
HNH100  that says "Cannot 
obtain  IP  address" when I  am 
trying to  connect  to my W i - Fi 
network, what  could  the 
problem be? Your  wireless  router does  not support  DHCP,  or the  DHCP  feature of your wireless 
router  is turned  off. If  your wireless  router  supports DHCP,  make sure  that its DHCP 
feature is turned  on. If  DHCP  is not  available, set the  Hub’s  IP  settings  manually.
D12 I  am...

Qu estion Answer
D15 How can  I  turn  a smart  plug on 
or off  using  the telephone 
handset KX - HNH100? There are 3 ways to turn  smart  plugs on  and off.
1. All  smart plugs  can be turned  on  or off at once.
2. All  smart plugs  in a selected area can  be turned  on or  off at once.
3. Individual  smart plugs  can be turned on  or off. 
Turning  all plugs  on or  off at once
1 . Press  [M ENU # 8 0  2]
2. Press  the   [ ▲
]  or  the [ ▼
] button  to select  “All locations”
3. Press  [SELECT]
4....

Qu estion Answer
D17 How can  I  change the Alert 
volumes  using  the telephone 
KX - HNH100? You  can adjust  the alert volume  heard during  At Home  mode and Away mode.  
There are 3 volumes  you  can adjust:
“ Alert volume”:  The  volume  of the alert that sounds  when the system is  not 
disarmed within  the entry delay time.
“ Entry alert volume”:  The  volume  of the alert that sounds  during  the entry delay 
time.
“ Exit alert volume”:  The  volume  of alert that sounds  during  exit delay...

Que stion Answer
D20 How do  I  arm or disarm 
the security  system using 
the KX - HNH100  handset? The security  system has  3 modes.
1. “At Home”:  Door  and window  sensors  are armed.
2. “Away”: All  sensor  devices are armed
3. “Disarm”:  All sensor  devices are disarmed.
The Hub  LED  indicator  lights  in  red when  the security  mode is  set to “At Home” or 
“Away”.
To  arm the system:
1. Press  the [ARM ]  button.
2. Press  [ ▲
or  ▼
] to select  “At Home” or “Away”.
3. Press  [SELECT]
If  the...

Qu estion Answer
D24 M y calls  go to my voice  mail 
service, how  can I  stop  this? M ake sure  the answering  machine  is activated, turned on  and adjust  the ring count  on 
the answering  machine  to less  than the  voice mail  (service from  your telephone 
company)  ring count.
If  you do  not want to  use the Voice  mail  service from your  telephone  company contact 
them to  turn  the service off.
To  use the built  in  answering  machine  you must  first  activate it,  and then turn  it on....