Panasonic Hdtv Projection Monitor Pt 53tw54 Operating Instructions

							HDTV Projection Monitor
Operating Instructions
Monitor de proyección de Alta Definición
Instrucciones de Operación
Téléprojecteur haute définition
Manuel d’utilisation
TQB2AA0506 40324
PRINTED IN USA
IMPRESO EN EE.UU
IMPRIMÉ AUX ÉTATS-UNIS
PT-53TW54 PT-W4734X
PT-47X54
PT-53X54 
						

							ENGLISH
The exclamation point within a triangle
is intended to tell the user that
important operating and servicing
instructions are in the papers with the
appliance.The lightning flash with arrow head
within a triangle is intended to tell the
user that parts inside the product
constitute a risk of electric shock to
persons.
RISK OF ELECTRIC SHOCK
DO NOT OPEN
WARNING
WARNING:   TO REDUCE THE RISK OF FIRE OR ELECTRIC SHOCK, DO NOT EXPOSE THIS 
APPARATUS TO RAIN OR MOISTURE.  DO NOT PLACE ANY OBJECTS FILLED WITH 
LIQUIDS, SUCH AS VASES, ON THIS APPARATUS.
The Class II insulation symbol (square within a square) indicates that this product has been evaluated 
and tested to comply with Class II insulation requirements.
IMPORTANT SAFETY INSTRUCTIONS
1. Read these instructions.
2. Keep these instructions.
3. Heed all warnings.
4. Follow all instructions.
5. Do not use this apparatus near water.
6. Clean only with dry cloth.
7. Do not block any ventilation openings. Install in accordance with the manufacturer’s instructions.
8. Do not install near any heat sources such as radiators, heat registers, stoves, or other apparatus (including
amplifiers) that produce heat.
9. Do not defeat the safety purpose of the polarized or grounding type plug. A polarized plug has two blades with
one wider than the other. A grounding type plug has two blades and a third grounding prong. The wide blade
or the third prong are provided for your safety. If the provided plug does not fit into your outlet, consult an elec-
trician for replacement of the obsolete outlet. 
10. Protect the power cord from being walked on or pinched particularly at plugs, convenience
receptacles, and the point where they exit from the apparatus.
11. Only use attachments/accessories specified by the manufacturer.
12. Use only with the cart, stand, tripod, bracket or table specified by the manufacturer, or sold
with the apparatus. When a cart is used, use caution when moving the cart/apparatus combi-
nation to avoid injury from tip-over.
13. Unplug this apparatus during lightning storms or when unused for long periods of time.
14. Refer all servicing to qualified service personnel. Servicing is required when the apparatus has been dam-
aged in any way, such as power-supply cord or plug is damaged, liquid has been spilled or objects have fallen
into the apparatus, the apparatus has been exposed to rain or moisture, does not operate normally, or has
been dropped.
WARNING:  TO REDUCE THE RISK OF ELECTRIC SHOCK DO NOT REMOVE
COVER OR BACK. NO USER-SERVICEABLE PARTS INSIDE. REFER SERVICING
TO QUALIFIED SERVICE PERSONNEL.
Read these instructions completely before operating television.
Contents are subject to change without notice or obligation.
Copyright 2004 by Matsushita Electric Corporation of America. All rights reserved.
Unauthorized copying and distribution is a violation of law.  
						

							IMPORTANT INFORMATION
1 z
ENGLISH
Important Information
The Energy Star label, a symbol for energy efficiency, was created by the U.S. 
Environmental Protection Agency (EPA) and the U.S. Department of Energy 
(DOE) to help customers identify products that can save them money and protect 
the environment by saving energy. Energy Star compliant products generally 
consume less energy than similar standard products.
Important Information Regarding the Use of Video Games, Computers, or Other Fixed 
Image Displays
WARNING: The marking or retained image on the picture tube resulting from viewing fixed image is
not an operating defect and as such is not covered by Warranty. 
The projection television is designed to display constantly moving images on the screen. Continuous
viewing of stationary images such as letterbox pictures on standard screen TVs (with top/bottom bars),
non-expanded standard (4:3) pictures on wide screen TVs (with side bars shown on each side of an
image), stock market report bars (ticker running at the bottom of the screen), video game patterns, fixed
scoreboards, bright station logos, on-line (Internet) or repetitive computer style patterns should be limited.
The extended use of fixed image program material can cause permanent picture tube damage, shown as
a “shadow image” viewable on normal programs. This type of irreversible picture tube deterioration can be
limited by performing the following steps:
• Limit the display of fixed image program material to no more than 15% of total viewing time per week.
• Turn the power off when not in use. FCC CAUTION: ANY CHANGES OR MODIFICATIONS TO THIS TV RECEIVER NOT EXPRESSLY
APPROVED BY MATSUSHITA ELECTRIC CORPORATION OF AMERICA COULD CAUSE
HARMFUL INTERFERENCE, WHICH WOULD VOID THE USER’S AUTHORITY TO
OPERATE THIS EQUIPMENT.
THIS PRODUCT UTILIZES CATHODE RAY TUBES (CRT) AND OTHER
COMPONENTS THAT CONTAIN LEAD. DISPOSAL OF THESE MATERIALS
MAY BE REGULATED IN YOUR COMMUNITY DUE TO ENVIRONMENTAL
CONSIDERATIONS. FOR DISPOSAL OR RECYCLING INFORMATION
PLEASE CONTACT YOUR LOCAL AUTHORITIES, OR THE ELECTRONICS
INDUSTRIES ALLIANCE:  ENVIRONMENTAL NOTICE:
Manufactured under license from BBE Sound, Inc.
Licensed by BBE Sound, Inc. under USP4638258, 5510752 and
5736897. BBE and BBE symbol are registered trademarks of BBE
Sound, Inc.
BBE ViVA HD3D (High Definition 3D) Sound provides musically accurate natural 3D 
image with Hi-Fi sound. The clarity of the sound is improved by BBE while the width, 
depth and height of sound image are expanded by BBE’S proprietary 3D sound process. 
BBE ViVA HD3D Sound is compatible with all TV programs including news, music, 
dramas, movies, sports and electronic games.
BBE High Definition Sound restores clarity and presence for better speech
intelligibility and music realism.  
High Definition Sound
HDMI, the HDMI logo and High Definition Multimedia Interface are 
trademarks or registered trademarks of HDMI Licensing LLC. 
						

							2 z
IMPORTANT INFORMATION
ENGLISH
Important Information (contd.)
Information Regarding Auto Convergence 
This feature is used to automatically adjust convergence. It is
recommended that this feature be used after moving the PTV or
any change of the magnetic field, such as changing PTV location
or adding additional speakers around the PTV. 
Note:During auto convergence process the remote control has
no effect.
Note:If convergence is not acceptable after auto convergence
is finished, refer to pages 24 and 25 to set convergence
manually.
Information Regarding Convergence
In the projection television, the image is formed by
projecting 3 different color images (red, green and blue)
onto the projection screen. Convergence refers to the
alignment of red, green and blue images on the
projection screen. When these images are properly
aligned (converged), you see a sharp and vibrant color
image. Sometimes, the three images may require
alignment. This is due to the effect of Earth’s magnetic field
on the projection tubes. Normally, adjustment is not
necessary after the initial alignment at the center of the
screen. It is possible to correct the color fringing on other
areas of the screen by using the buttons on the remote
control and by following the on-screen instructions in the
set-up menu. Please converge the images before using the
television for the first time. The following diagram shows examples of a misaligned
image and a properly aligned image. Please refer to
pages 24 and 25 for detailed procedure on how to
adjust convergence manually.
 
Note:
• Make sure that the PTV is on for at least 20 minutes
before adjusting convergence, as described on pages 24
and 25.
FCC INFORMATION
This equipment has been tested and found to comply with
the limits for a Class B Digital Device in accordance with
the specifications in Part 15 of the FCC Rules. The limits
are designed to provide reasonable protection against
radio and television interference in a residential installation.
This equipment generates, uses and can radiate radio
frequency energy and, if not installed and used in
accordance with the instructions, may cause harmful
interference to radio communications. However, there is no
guarantee that interference will not occur in a particular
installation.
If this equipment does cause interference to radio or
television reception (which you can determine by turning
the equipment off and on), try to correct the interference by
one or more of the following measures.
• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and the
receiver.
• Connect the equipment into an outlet on a circuit
different from that to which the receiver is connected.
• Consult the dealer or an experienced radio/TV
technician for help.
AUTO CONVERGENCE
      IN PROCESSˆPress the  button
on the front control panel.
Note:Do not turn PTV off during
Auto Convergence process.
AUTO CONV
ˆNormal picture with
convergence problem.
ˆAfter auto convergence  has 
finished the normal picture 
will be displayed, with 
convergence problem 
corrected. 
Misconverged image
Properly aligned image 
						

							TABLE OF CONTENTS
3 z
ENGLISH
Table of Contents
Important Information ..................................... 1
Information Regarding Auto Convergence .................    2
Information Regarding Convergence ..........................    2
Information Regarding The Use Of Video Games
Computers, Or Other Fixed Image Displays ............    2
FCC Information .........................................................    2
Customer Record........................................................    4
Care and Cleaning ......................................................    4
Specifications..............................................................    4
Feature Chart..............................................................    4
Installation ........................................................ 5
Television Location .....................................................    5
Optional Cable Connections .......................................    5
AC Power Supply Cord ...............................................    5
Cable / Antenna Connection .......................................    5
Remote Control Battery Installation ............................    5
Initial Set Up Menu........................................... 6
Optional Equipment Connections .................. 7
VCR ...........................................................................     7
Cable Box ..................................................................     7
VCR and Cable Box...................................................     7
Front Control Panel.....................................................    8
Amplifier (TO AUDIO AMP) ........................................    8
Digital TV - Set-Top Box (DTV-STB) or DVD Players    8
Program Out connection .............................................    9
HDMI  (High Definition Multimedia Interface) input 
connection ...............................................................    9
Special Features .............................................10
ASPECT Button..........................................................   10
BBE Button .................................................................   10
SAP Button .................................................................   10
Split Operation............................................................   10
Split Operation with Cable Box...................................   10
Split Operational Buttons............................................   11
Split CTRL Button ...................................................    11
TV/Video Button ......................................................    11
Search Button .........................................................    11
Freeze Button .........................................................    11
Main Picture Freeze Feature ..................................    11
Direct Video Input Selection .......................................   11
Remote Control Operation ............................ 12
Operating Components with Remote Control.............  13
Programming the Remote Control..............................  15
Programming Without a Code ....................................  15
Component Codes .....................................................  15
Basic Menu Navigation.................................  18
Icon Menus Operation ..................................  19
Picture ........................................................................  19
Audio ..........................................................................  19
Channels ....................................................................  20
Timer ..........................................................................  21
Lock ............................................................................  21
Set Up ........................................................................  24
Troubleshooting Chart .................................  26
Index...............................................................  27
Note:The warranty and service center information is located in the back of this manual. 
						

							4 z
CONGRATULATIONS
ENGLISH
Congratulations
Your new Projection Television (PTV) features state-of-the-
art technology for high quality picture and sound with
complete audio/video connections for your home theater
system. Your PTV is designed to give you many years of
enjoyment. It was thoroughly tested and tuned at the
factory for best performance.
Customer Record
The model and serial number of this product are located on
the back of the PTV. You should note the model and serial
number in the space provided and retain as a permanent
record of your purchase. This will aid in identification in the
event of theft or loss. Product registration for U.S. customers
is available at:  www.prodreg.com/panasonic.
Model
Number
Serial
Number
Care and Cleaning
Projection Screen (Turn PTV Off)
The projection screen is a high precision lens system which
has a protective screen. The protective screen is fully
washable with the following precautions:
• Use a mild soap solution or window cleaner and a clean
cloth.
• DO NOT USE ABRASIVE CLEANERS.
• Do not use laundry detergent or automatic dishwasher
soap.
• Do not use alcohol, ammonia, or petroleum based
products. 
• Avoid excessive moisture and wipe dry.
• Prevent solution from running into the receiver below.
• Avoid bumping or scraping the screen.
Warning:Do not spray any type of cleaning fluid directly on the
screen.
Cabinet and Remote Control
• For cabinets and remote control, use a soft cloth
dampened with water or a mild detergent solution. Avoid
excessive moisture and wipe dry.
• Do not use benzene, thinner or other petroleum based
products.
Specifications
Specifications are subject to change without notice or
obligation.    
Feature Chart 
Power Source
PT-47X54 (3.5A)
PT-53X54 (3.5A)
PT-53TW54 (4.0A)
PT-W4734X (3.5A)
120V AC, 60Hz
127V AC, 60Hz
Channel Capability - 181VHF-12; UHF-56; Cable-113
Video Input Jacks1Vp-p, 75 Ohm, Phono Jack Type
Audio Input Jacks500mV RMS 47K Ohm
 Video out jack1Vp-p, 75 Ohm, Phono Jack Type
 Audio Output Jacks0-2.0V RMS 4.7K Ohm
HDMI Input jackType A
Component Input (Y / PB / PR)75 Ohm, Phono Jack Type
 S-Video Input JacksS-Video (Y-C) Connector
MODELS
 PT-W4734X  
 PT-47X54  
PT-53X54 
PT-53TW54 
FEATURES
MENU LANGUAGE 
ENG/SPAN/FR•  •  •  •  
PROTECTIVE SCREEN•  •  •  •  
2 TUNER SPLIT•  •  •  •  
CLOSED CAPTIONING•  •  •  •  
V-CHIP CAPABILITY •  •  •  •  
DIGITAL SCAN RATE 1080i, 
540p1080i, 
540p1080i, 
540p1080i, 
540p
NTSC LINE-DOUBLER  540p 540p540p 540p
VIDEO NORM•  •  •  •  
AUDIO NORM•  •  •  •  
STEREO•  •  •  •  
AI SOUND•  •  •  •  
BASS/BALANCE/TREBLE•  •  •  •  
SURROUND•  •  •  •  
BBE•  •  •  •  
A/V IN (REAR/FRONT)  4
 (3/1)  4
 (3/1)4
 (3/1)4
 (3/1)
AUDIO OUT•  •  •  •  
HDMI/HDCP INPUT•  •  •  •  
S-VHS INPUT •  •  •  •  
COMPONENT INPUT    2    2     2      2 
						

							INSTALLATION
5 z
ENGLISH
Installation
Television Location
This unit can be used as part of an entertainment center. Consult
your dealer for available options.
• Avoid excessive sunlight or bright lights, including
reflections.
• Keep away from excessive heat or moisture. Inadequate
ventilation may cause internal component failure.
• Fluorescent lighting may reduce remote control
transmitting range.
• Keep away from magnetic equipment, including motors,
fans and external speakers.
Optional Cable Connections
Shielded audio and video cables should be used between
components. For best results:
• Use 75-ohm coaxial shielded cables.
• Use appropriate input and output connectors that match
your component connectors.
• Avoid long cables to minimize interference.
AC Power Supply Cord
CAUTION:  TO PREVENT ELECTRIC SHOCK,
MATCH WIDE BLADE OF PLUG TO WIDE SLOT
OF AC OUTLET AND FULLY INSERT. DO NOT
USE A PLUG WITH A RECEPTACLE OR OTHER
OUTLET UNLESS THE BLADE CAN BE FULLY INSERTED TO
PREVENT BLADE EXPOSURE. 
PROTECT POWER CORDS FROM BEING WALKED ON, ROLLED
OVER, CRIMPED, BENT, OR PINCHED, PARTICULARLY AT PLUGS,
CONVENIENCE RECEPTACLES, AND THE POINT WHERE THEY EXIT
FROM THE APPARATUS.
Cable / Antenna Connection
For proper reception, either a cable or antenna connection
is required.
Cable Connection
Connect the cable supplied by your local
cable company. Tighten with fingers only.
Use of any tool (e.g. pliers) for tightening
may result in tuner damage.
Note:A cable converter box may be
required for proper reception.
Check with your local cable
company for compatibility requirements.
Antenna Connection
For proper reception of VHF/UHF channels, an external antenna
is required. For best reception an outdoor antenna is
recommended.
• Connect home antenna to ANT
connection on back of television.    
Note:Cable Mode is preset at the
factory. 
External Shelf (mounted on top)
(models PT-W4734X, PT-47X54 and PT-53X54 only)
For your convenience, optional devices such as an HDTV
Receiver, a Satellite Receiver, a Cable Box, a DVD player, a VCR
or a center channel speaker can be placed on this shelf.
CAUTION: The weight limit of this shelf must not
exceed 25 lbs.
Remote Control Battery Installation
Requires two AA batteries (supplied).  
Procedure
1. Turn the remote control face down. Remove battery
cover by pressing down on the marking on the cover
and sliding it off in the direction indicated.
2. Install batteries matching (+) and (-) polarity signs.
3. Replace the battery cover by sliding in reverse until the
lock snaps.
Note:Incorrect installation can cause battery leakage and
corrosion that will damage the Remote Control.
Precautions
• Replace batteries in pairs.
• Do not mix battery types (zinc carbon with alkaline).
• Do not recharge, heat, short-circuit, disassemble, or
burn batteries.
Polarized plug
75 Ohm VHF/UHF
on back of TV
Incoming Cable from
Cable Company
Incoming Cable from
Home Antenna
1
AA / 1.5A
AA / 1.5A
Battery Polarity
2
AA / 1.5A
AA / 1.5A
3 
						

							6 z
INITIAL SET UP MENU
ENGLISH
Initial Set Up Menu
For your convenience, the Initial Set up menu will be
displayed on screen when the set is turned on for the first
time. If needed, follow the menus and procedures for
setting up the features.
IDIOMA/LANGUE
To change menu language to ENGLISH, SPANISH or
FRENCH.
Procedure
• Press VOL X to select English, Spanish or French.  
MODE
To select TV (antenna) or CABLE mode depending on the
signal source. 
Procedure
• Press VOL X to select TV or CABLE.  
AUTO PROGRAM
To automatically program all channels received through the
RF input.
Procedure
• Press VOL X to start Auto Programming. 
CONVERGENCE
This feature is used to automatically adjust convergence. It
is recommended that this feature be used when the set is
turned on for the first time.
Procedure
• Press VOL X to display Auto Convergence Process
menu.
Note:Refer to page 24 for setting Convergence
manually, if  needed.   
PRESS ACTION TO  EXIT
INITIAL SET UP
IDIOMA/LANGUE
MODE
AUTO PROGRAM
CONVERGENCEENGLISH 

CABLE 





PRESS ACTION TO  EXIT
INITIAL SET UP
IDIOMA/LANGUE
MODE
AUTO PROGRAM
CONVERGENCEENGLISH 

CABLE 





PRESS ACTION TO  EXIT
INITIAL SET UP
IDIOMA/LANGUE
MODE
AUTO PROGRAM
CONVERGENCEENGLISH 

CABLE 





PRESS ACTION TO  EXIT
INITIAL SET UP
IDIOMA/LANGUE
MODE
AUTO PROGRAM
CONVERGENCEENGLISH 

CABLE 




 
						

							OPTIONAL EQUIPMENT CONNECTIONS
7 z
ENGLISH
Optional Equipment Connections
Note:The remote control must be programmed with supplied
codes to operate the optional equipment.
VCR Connection 
Follow this diagram when connecting your television to a
VCR only. 
Viewing a television program
Procedure
• Tune the television to the program you want to view.
Viewing a video
Procedure
ˆOption A
• Press the TV/VIDEO button on the remote control to
select the video input (VIDEO 1, VIDEO 2, etc.)
connected to your VCR.
• Begin the video.
ˆOption B
• Tune the television to Channel 3 or 4, depending on your
VCR.
• Begin the video.
Recording a television program
Procedure
ˆOption A (Recording and viewing the same program)
• Tune the television to Channel 3 or 4, depending on your
VCR.
• Using the VCR, tune to the television program you want
to record.
• Begin recording.
ˆOption B (Recording one program while viewing another
program)
• Press the TV/VIDEO button on the remote control to
select the video input (VIDEO 1, VIDEO 2, etc.)
connected to your VCR.
• Using the VCR, tune to the television program you want
to record.
• Begin recording.
• Press the TV/VIDEO button on the remote control to
switch back to TV mode.
• Tune the television to the program you want to view. 
Cable Box Connection
Follow this diagram when connecting your television to a
cable box only.  
Viewing a premium (scrambled) cable channel
Procedure
• Tune the television to Channel 3.
• Using the cable box, tune to the premium cable channel
you want to view.
VCR and Cable Box Connection
Follow this diagram when connecting your television to
both a VCR and a cable box. 
Viewing a premium (scrambled) cable channel
Procedure
• Tune the television to Channel 3.
• Using the cable box, tune to the premium cable channel
you want to view.
AUDIO
   IN L
RANT 
CABLES NOT INCLUDED
ANT  IN ANT  OUT
VIDEO OUT
AUDIO OUT L
R
PLAY
STOP R
E
WFFVCR
TERMINALS ON BACK OF TELEVISION
Incoming
Cable
S-VIDEO
COMPONENT 
VIDEO INPUTVIDEO
12
INPUT
PROG
OUTTO AUDIO 
AMP
VIDEOY
P
B
PR

L
R
AV IN
231
HDMI
INPUT INPUT
ANT IN ANT  OUT
15CABLE BOX
Incoming
Cable
AUDIO
   IN L
RANT 
CABLES NOT INCLUDED
TERMINALS ON BACK OF TELEVISION
S-VIDEO
COMPONENT 
VIDEO INPUTVIDEO
12
INPUT
PROG
OUTTO AUDIO 
AMP
VIDEOY
P
B
PR

L
R
AV IN
231
HDMI
INPUT INPUT
ANT OUT ANT  IN
15
CABLES NOT INCLUDED
ANT  IN ANT  OUT
VIDEO OUT
AUDIO OUT L
R
PLAY
STOP R
E
WFFVCR
TERMINALS ON BACK OF TELEVISION
Incoming
CableCABLE BOX
AUDIO
   IN L
RANT 
CABLES NOT INCLUDED
S-VIDEO
COMPONENT 
VIDEO INPUTVIDEO
12
INPUT
PROG
OUTTO AUDIO 
AMP
VIDEOY
P
B
PR

L
R
AV IN
231
HDMI
INPUT INPUT 
						

							8 z
OPTIONAL EQUIPMENT CONNECTIONS
ENGLISH
VCR and Cable Box Connection (Cont.)
Recording a premium (scrambled) cable channel
Procedure
• Press the TV/VIDEO button on the remote control to
select the video input (VIDEO 1, VIDEO 2, etc.)
connected to your VCR.
• Turn the VCR ON.
• Tune the VCR to Channel 3 or 4, depending on the
switch setting on the back of VCR.
• Using your cable box, tune to the premium cable channel
you want to record.
• Begin recording.
ˆTo view a different channel while recording:
• Press the TV/VIDEO button on the remote control to
select TV mode.
• Tune the television to a program (except another
premium cable channel).
Front Control Panel
The front control panel can be used to access menus and
switch video mode when the remote control is not available.
Note:The ON/OFF indicator LED (red) will be lit when set is
on. 
 
A second VCR, Camcorder, a video disc player, video game
equipment or DSS equipment can also be connected to the
video inputs. See the optional equipment manual for details
.
Procedure
• Connect equipment to front Audio/Video input jacks.
• Press TV/VIDEO button to select VIDEO 4 input mode.
• Operate optional equipment as instructed in equipment
manual.
Amplifier Connection (TO AUDIO AMP)
To listen through a separate stereo system, connect an
external audio amplifier to TO AUDIO AMP outputs on back
of television.
Note:TO AUDIO AMP terminals cannot be connected directly
to external speakers.  
Audio Adjustments
• Select SPEAKERS ON located in the onscreen AUDIO
menu. 
• Set amplifier volume to minimum.
• Adjust television volume to desired level.
• Adjust amplifier volume to match the television.
• Select SPEAKERS OFF & VARIABLE AUDIO OUT from
AUDIO menu. 
• Volume, mute, bass, treble and balance are now
controlled through the television. 
Note:Select SPEAKERS OFF & FIXED AUDIO OUT to control
audio functions through the external amplifier.
Digital TV - Set-Top Box (DTV-STB) or DVD 
Connection
This television is capable of displaying 1080i and 540p DTV
signals when connected to a DTV tuner set-top-box (STB). In
order to view DTV programming, the STB must be connected
to the component video inputs (Y,PB,PR) of the television. A
DTV signal must be available in your area. Select the output of
the STB to either 1080i or 540p.
This television also utilizes a progressive scan doubler, which
de-interlaces the NTSC signal and progressively scans the
image. This allows you to sit close to the TV and not see the
thin black horizontal lines (venetian blind effect) associated
with interlaced TV pictures.
Use this diagram to connect the DTV-STB or DVD player to
the back of your projection television.    
Note:There are two sets of three video iacks, Y, PB, and PR.
Separate component color inputs provide luminance and
color separation. Use the L (left) and R (right) audio
inputs.
Front panel for  PT-47X54, PT-W4734X  and PT-53X54
ON/OFF INDICATOR
VOL +   CH
CH
 VOL -
POWER ON/OFF
Front panel for PT-53TW54
ACTIONPOWER TV/VIDEOBBEAUTO CONV.
L - AUDIO - R VIDEO 4S-VIDEO
ACTIONAUTO CONV. TV/VIDEO
POWER
CH
CHVOL   VOL  

TV / VIDEO VOL 
 VOL
 POWEROKCH
CH
MENU
Location of front Video 
4 input jacks for model 
PT-53TW54.
90.7 MHZ
EXTERNAL AMPLIFIER
AUDIO
   IN L
RANT 
CABLES NOT INCLUDED
TERMINALS ON BACK OF TELEVISION
S-VIDEO
COMPONENT 
VIDEO INPUTVIDEO
12
INPUT
PROG
OUTTO AUDIO 
AMP
VIDEOY
PB
PR

L
R
AV IN
231
HDMI
INPUT INPUT
AUDIO
   IN L
RANT 
CABLES NOT INCLUDED
TERMINALS ON BACK OF TELEVISION
S-VIDEO
COMPONENT 
VIDEO INPUTVIDEO
12
INPUT
PROG
OUTTO AUDIO 
AMP
VIDEOY
PB
PR

L
R
AV IN
231
HDMI
INPUT INPUT
TERMINALS ON BACK OF DTV-STB OR DVD PLAYER
R-AUDIO-L - VIDEO  S-VIDEONTSC OUTPUT
Y
PBPRMAIN
VIDEODIGITAL TV OUTPUT
L-AUDIO-R