Panasonic Hdtv Projection Monitor Pt 47wx52 Operating Instructions

							REMOTE CONTROL OPERATION (MODELS PT-47WX52C, PT-53WX52C AND PT-56WX52C)
29 l
Component Codes (contd.)
BrandCode
Aiwa223, 224, 225
Denon231
Fisher203
Jensen214
JVC229, 230
Kenwood200, 207
Marantz202
Nakamichi205
Onkyo208, 209, 213
Panasonic216, 218
Philips222
BrandCode
Admiral120
Aiwa125, 126
Denon134, 135, 136
Fisher104
Garrard11 3
Harman Kardon115, 123
Jensen129
JVC132, 133
Kenwood100, 108
Magnavox127
Marantz124
Mclntosh11 6
Nakamichi106
Onkyo109, 114
BrandCode
Pioneer204
RCA226, 227, 228
Sansui205, 210
Sharp231
Sony219, 220
Teac210, 211, 215
Technics216, 218
Ya m a h a201, 202
BrandCode
Optimus 103, 127, 130, 131
Panasonic118, 119, 121
Philips123
Pioneer105, 107
Quasar118, 119, 121
RCA103, 105, 127, 130, 131
Sansui103, 111, 139
Sharp134, 137
Sony122
Soundesign138
Teac111 ,  11 2 ,  11 3
Technics118, 119, 121
Victor132, 133
Ya m a h a101, 102
Codes for Cassette Deck
Codes for Receivers 
						

							30 l
ROLLER GUIDE MENU NAVIGATION
Roller Guide Menu Navigation
Press to display the roller guide
menu.
Press to rotate to desired icon.
Press to display main menu 
and submenus field.
Press to select desired main
menu feature.
Main Menu
Press to enter submenu field.
Submenu field
Contd. 
SETUP
MODE
AUTO PROGRAM
MANUAL PROGRAM         PROG CHAN
CC
OTHER ADJ.u
u
u
IDIOMA/
LANGUE
ANTENNA ANT1
uCABLE
Main Menu
FieldSubmenu
Field
CCSETUP
CC ON MUTE
CC MODE IDIOMA/
LANGUE
PROG CHAN
OTHER ADJ.
NO u
OFF u
CCSETUP
CC ON MUTE
CC MODE IDIOMA/
LANGUE
PROG CHAN
OTHER ADJ.
NO u
OFF u 
						

							ROLLER GUIDE MENU NAVIGATION
31 l
Roller Guide Menu Navigation (contd.)
Pressto select desired
submenu feature.
Pressto select or adjust.
Press twice to return to
the roller guide.
Press to exit roller guide.
Contd. 
NORMAL PICTURE
CCSETUP
CC ON MUTE
CC MODE IDIOMA/
LANGUE
PROG CHAN
OTHER ADJ.
NO u
OFF u
CCSETUP
CC ON MUTE
CC MODE IDIOMA/
LANGUE
PROG CHAN
OTHER ADJ.
NO u
C1 u 
						

							32 l
ROLLER GUIDE ICONS
Roller Guide Icon Menus
These charts list all menus under each Roller Guide Icon and which pages to refer to for menus description.
    
 REFER
 TO
PA G E
IDIOMA/LANGUErMODE -  (ENGLISH, FRANÇAIS, ESPAÑOL)33
PROG CHANrMODE - (TV or CABLE)rANTENNA - (ANT1 or ANT2)rAUTO PROGRAMrMANUAL PROGRAM
33
CC (CLOSED CAPTIONED)
rCC ON MUTErCC MODE34
OTHER ADJ.rAUTO POWER rCHAN BANNERrCONVERGENCE 1rCONVERGENCE 2
34
34
35
36
REFER
TO
PA G E
CLOCK SETrTIMErDAY37
SLEEPrHOW LONG?37
TIMER1 or TIMER2
rDAYrON TIMErOFF TIMErENTER CHANNEL
37
REFER
TO
PA G E
FAVORITESrCHANNEL SCAN (ALL or FAV)39
CAPTIONrPRESET CAPTIONrMANUAL CAPTIONrINPUT LABEL
40
REFER
TO
PA G E
AUDIO ADJ.
rMODE - (STEREO, SAP or MONO)rBASS, TREBLE, BALANCE or NORMAL
41
OTHER ADJ.
rAI SOUNDrBBE
41
SURROUND
rMODE41
SPEAKERSrONrOFF & VARIABLE AUDIO OUTrOFF & FIXED AUDIO OUT
41
REFER
TO
PA G E
VIDEO ADJrPIC MODE (VIVID, STANDARD and CINEMA)rCOLOR, TINT, BRIGHTNESS, PICTURE,
SHARPNESS OR NORMAL38
OTHER  ADJ1rCOLOR TEMPERATURErNATURAL COLORrVIDEO NRr3D Y/C FILTER
38
38
38
39
OTHER  ADJ2
rCOLOR MATRIX
rVM
rFREEZE
39
REFER
TO
PA G E
MODE
rLOCK SET - (ALL, CHANNEL, GAME)rBLOCK PROGRAM   rHOW LONG?
42
V-CHIP OPERATION43
Roller Guide Icons 
ROLLER GUIDE MENU SELECTIONS 
						

							ROLLER GUIDE ICON MENU OPERATION
33 l
Roller Guide Icon Menu Operation 
SET UP
Note:Refer to page 30 for Roller Guide Menu Navigation procedures. 
Menu Languages
In SET UP Menu, select IDIOMA/LANGUE to change menu language to ENGLISH, ESPAÑOL (Spanish) or FRANÇAIS
(French).
Prog Chan (Program Channels)
In SET UP menu under PROG CHAN select:
rMODE - To select TV (antenna) or CABLE mode depending on the signal source.
rANTENNA -  To select either ANT1 or ANT2.
rAUTO PROGRAM - To automatically program all channels with a signal.
rMANUAL PROGRAM - To manually add or delete channels.
IDIOMA/
LANGUESET UP
MODE ENGLISH
PROG CHAN
CC
OTHER ADJ.urPress VOLu to select English, Spanish or French.
SETUP
MODE
AUTO PROGRAM
MANUAL PROGRAM         PROG CHAN
CC
OTHER ADJ.u
u
u
IDIOMA/
LANGUE
ANTENNA ANT1
uCABLErPress VOLu to select TV or CABLE.
SETUP
MODE
AUTO PROGRAM
MANUAL PROGRAM         PROG CHAN
CC
OTHER ADJ.u
u
u
IDIOMA/
LANGUE
ANTENNA ANT1
uCABLErPress VOLu to select ANT2 or ANT1.
SETUP
MODE
AUTO PROGRAM
MANUAL PROGRAM         PROG CHAN
CC
OTHER ADJ.u
u
u
IDIOMA/
LANGUE
ANTENNA ANT1
uCABLErPress VOLu to start AUTO PROGRAM.
SETUP
MODE
AUTO PROGRAM
MANUAL PROGRAM         PROG CHAN
CC
OTHER ADJ.u
u
u
IDIOMA/
LANGUE
ANTENNA ANT1
uCABLE
MANUAL PROGRAM
ENTER CHANNEL           3
TO ADD
TO DELETE
uu
rPress VOLu to display next menu.
Note:Use Remote numeric keypad to enter channel
numbers. 
						

							34 l
ROLLER GUIDE ICON MENU OPERATION
 (Closed Captioning)
This television contains a built-in decoder that displays   (Closed Captioned) text across the screen (white or colored
letters on black background). It allows the viewer to read the dialogue of a television program or other information. The
program viewed must include Closed Captioning for the feature to work.
r On Mute
Activates the onscreen Closed Caption feature when the MUTE button on the remote control is pressed. To deactivate
press MUTE button again.             
Note:This feature only functions when the Closed Caption Mode is OFF. The program being viewed must be broadcast with
Closed Captioning. (Refer to your local TV guide). 
r Mode
Activates the onscreen Closed Caption feature by selecting one of the following modes.
rOFF - When Closed Caption is not desired.
rC1 - For video related information to be displayed, up to 4 lines onscreen at a time. (It does not block relevant parts of the picture).
Text may be in any language.
rC2 to C4 - For other modes of video related information.
rT1 to T4 - For program guide and other information to be displayed, when available. (Blocks a large portion of the picture on the
television screen).
Other Adjustments
In SETUP Menu under OTHER ADJ. select:
rAUTO POWER ON - Select SET to power up the TV at the same time as the Cable box or other components or select OFF. 
rCHAN BANNER - Select ON to display onscreen banner when changing channels.    CC
CC
CC
rPress VOLu to select C1,C2 C3, C4 or NO.
Note:C1 mode is recommended.
CCSETUP
CC ON MUTE
CC MODE IDIOMA/
LANGUE
PROG CHAN
OTHER ADJ.
NO u
OFF   
CC
rPress VOLu to select C1, C2, T1, T2, C3, C4, T3, T4 or OFF.
Note:C1 mode is recommended for viewing Closed Caption. 
CCSETUP
CC ON MUTE
CC MODE IDIOMA/
LANGUE
PROG CHAN
OTHER ADJ.
NO      
OFF u
rPress VOLu to select OFF or SET.
OTHER ADJ.SET UP
AUTO POWER ON IDIOMA/
LANGUE
PROG CHAN
CC
SET u
CHAN BANNER                OFF   
      CONVERGENCE 1                 u
      CONVERGENCE 2                  u
rPress VOLu to select ON or OFF.
Note:Press RECALL to display onscreen Channel Banner at any time. 
OTHER ADJ.SET UP
  AUTO POWER ON IDIOMA/
LANGUE
PROG CHAN
CC
  SET   
     CONVERGENCE 1                 u
     CONVERGENCE 2                 u CHAN BANNER ONu 
						

							ROLLER GUIDE ICON MENU OPERATION
35 l
Other Adjustments (contd.)
rCONVERGENCE 1 - In SET UP menu select CONVERGENCE 1 under OTHER ADJ. only after moving the PTV to adjust for the
effects of the earth’s magnetic field on the projection tubes. 
Only use the remote control buttons while adjusting
convergence. The front control panel navigation and Action buttons have no effect.
Note:Convergence seldom needs adjusting except after moving the PTV. 
rUse the navigation buttons on the remote control to align the horizontal and vertical green lines on screen with the outside
reference marks on screen frame, as shown below. 
 
rUse the navigation buttons on the remote control to align the red cross with the white cross pattern at the center of the screen. 
Note:To prevent picture tube damage do not leave test pattern on for an extended period of time.  
  
  Convergence Adjustment
An adjusted cross pattern appears white with a
minimum of color fringing.
rPress VOLu to display next menu.
OTHER ADJ.SET UP
  AUTO POWER ON IDIOMA/
LANGUE
PROG CHAN
CC
   SET   
CHAN BANNER ONu
CONVERGENCE 2u CONVERGENCE 1
u
CONVERGENCE
GREEN
NEXT : ACTION
Reference Marks
rPress   to display RED convergence menu.ACTION
screen frame
rPress   to store adjustments and to
display normal picture.ACTION
CONVERGENCE
RED
NEXT : ACTIONCONVERGENCE
BLUE
NEXT : ACTION
rPress  to display BLUE convergence
menu.
rThen repeat procedure for adjusting blue. ACTION 
						

							36 l
ROLLER GUIDE ICON MENU OPERATION
Other Adjustments (contd.)
rIn SET UP menu select CONVERGENCE 2 under OTHER ADJ. Only use the remote control buttons while adjusting
convergence. The front control panel navigation and Action buttons have no effect.
Note:Perform CONVERGENCE 2 only after CONVERGENCE 1 is adjusted properly. 
   
  
  Convergence Adjustment
An adjusted cross pattern appears white with a
minimum of color fringing.
rPress VOLu to display next menu.
rPress the 1 through 9 keyboard buttons on
the remote control to select the desired
convergence point.
rUse the navigation buttons to align the red
cross with the white cross pattern.
Note: Remote Control must be in TV modeOTHER ADJ.SET UP
  AUTO POWER ON IDIOMA/
LANGUE
PROG CHAN
CC
  SET   
     CONVERGENCE 1                u
     CONVERGENCE 2               u CHAN BANNERONu
rPress   to display BLUE convergence menu.ACTION
BLUE ADJ: ACTION
 1 2  3
 6
 4
 7 8  9RED 
rPress the 1 through 9 keyboard buttons on the remote control to select
the desired convergence point.
rUse the navigation buttons on remote control to align the blue cross
with the white cross pattern.
rPress   to store adjustments and to
display normal picture.
ACTION
NEXT : ACTION
 1 2  3
 6
 4
 7 8  9BLUE  
						

							ROLLER GUIDE ICON MENU OPERATION
37 l
TIMER
Note:Refer to page 30 for Roller Guide Menu Navigation procedures.
Clock Set 
Set the time and the day of the week.   
Sleep Timer
In TIMER menu, select SLEEP to turn television off in 30, 60 or 90 minutes. Select NO to turn off timer.
Timer 1 and Timer 2
In TIMER menu, select one or both timers to turn the television on and off at selected times, on selected channels, and
on selected days.TIME must be entered in CLOCK SET to operate the TIMER features.
  Turn Off After 90 Minutes
The television automatically turns OFF after 90
minutes when turned ON by the TIMER.  If the
OFF time is selected or if a key is pressed, the
automatic OFF after 90 minutes will be cancelled.
  TIMER Activation
The TIMER is active when the television is OFF or
ON. The television will switch to the selected
channel at the selected time set in the TIMER.
CLOCK SETCLOCK
TIME                        1 2  :  10
SLEEP
TIMER1
TIMER2
-  -  -
DAY
rPress tVOL or VOLu to select hours AM or PM.
rPress CHq to select minutes position. 
r Press tVOL or VOLu to select minutes.
rPress CHq to select DAY.
rPress tVOL or VOLu to select day of the week.
SLEEPTIMER
HOW LONG? CLOCK SET
TIMER1
TIMER2
NO urPress VOLu to select 30, 60, 90 or NO.
rPress VOLu to select day or days.
rPress CHq to select ON TIME, then press VOLu. 
rRepeat for setting OFF TIME.
rPress CHq to select ENTER CHANNEL, then press VOLu to select
channel. 
rPress CHq to select SET, then press VOLu to select YES or NO. 
TIMER2TIMER
DAY SAT-SUN
ON TIME                   -  -  :  -  -  
OFF TIME                  -  -  :  -  - 
      
ENTER CHANNEL        -  -  -
SETCLOCK SET
SLEEP
TIMER1
u
              NO u 
						

							38 l
ROLLER GUIDE ICON MENU OPERATION
PICTURE
Note:Refer to page 30 for Roller Guide Menu Navigation procedures. 
Video Adj. 
rPIC MODE -  Lets you choose one of three pre-set Picture Modes that best suit the program you are viewing. 
rCOLOR - Adjusts desired color intensity.
rTINT - Adjusts natural flesh tones.
rBRIGHTNESS - Adjusts dark areas of picture.
rPICTURE - Adjusts white areas of picture.
rSHARPNESS - Adjusts clarity of outline detail.
rNORMAL - Reset selected PIC mode adjustments to factory default settings.  
Other Adj1
In Picture menu under OTHER ADJ1 select:
rCOLOR TEMP (temperature) - To increase or decrease WARM (red) and COOL (blue) colors to suit personal preferences.
rNATURAL COLOR - To increase the color reproduction range with natural color gradation and highly delicate hues. 
rVIDEO NR - Reduces noise in the channel, commonly called snow. Remains on when receiving weak signal.          rPress tVOL or VOLu to select.
• VIVID - This is the default mode. It provides enhanced picture contrast and
sharpness for viewing in a well -lighted room.   
• STANDARD - Recommended for normal viewing conditions with subdued room
lighting.
• CINEMA - Select mode for watching movies in a darkened room. It provides a
soft, film-like picture.
Note:Each mode has it’s own picture settings (Color, Tint, Brightness, Picture and
Sharpness).
VIDEO ADJ.PICTURECOLOR
TINT
BRIGHTNESS
PICTURE
SHARPNESS
NORMAL
OTHER ADJ1
OTHER ADJ2
NOu
PIC MODE                VIVID
rPress CHq to select desired picture adjustment. 
rPress tVOL or VOLu to adjust.VIDEO ADJ.PICTURECOLOR
TINT
BRIGHTNESS
PICTURE
SHARPNESS
NORMAL
OTHER ADJ1
OTHER ADJ2
NOu
PIC MODE                VIVID
rPress VOLu to select WARM, COOL or NORMAL.
PICTURE
OTHER ADJ2
VIDEO ADJ
ONu OFFu ONu NORMALu
OTHER ADJ1COLOR TEMP 
NATURAL COLOR  
3D Y/C  FILTER VIDEO NR
rPress VOLu to select OFF or ON.
PICTURE
OTHER ADJ2
VIDEO ADJ
ONu OFFu ONu NORMALu
OTHER ADJ1COLOR TEMP 
NATURAL COLOR  
3D Y/C  FILTER VIDEO NR
rPress VOLu to select OFF or ON.
PICTURE
OTHER ADJ2
VIDEO ADJ
ONu OFFu ONu NORMALu
OTHER ADJ1COLOR TEMP 
NATURAL COLOR  
3D Y/C  FILTER VIDEO NR