Panasonic Hdtv Projection Monitor Pt 47wx52 Operating Instructions

							OPTIONAL EQUIPMENT CONNECTIONS
9 l
Cable Box Connection 
Follow this diagram when connecting your television to a cable box only.
Note:The remote control must be programmed with supplied codes to operate the cable box.
Viewing a premium (scrambled) cable channel
Procedure
1. Select ANT2 in the SET UP menu under Prog Chan (Program Channels).
2. Tune the television to Channel 3.
3. Using the cable box, tune to the premium cable channel you want to view.
Note:To use special features such as Favorite Channels and Channel Captions, ANT1 must be selected in the SET UP menu under
Prog Chan.  
VCR and Cable Box Connection  
Follow this diagram when connecting your television to both a VCR and a cable box.
Note:The remote control must be programmed with supplied codes to operate the VCR and cable box. 
Viewing a premium (scrambled) cable channel
Procedure
1. Select ANT2 in the SET UP menu under Prog Chan (Program Channels).
2. Tune the television to Channel 3.
3. Using the cable box, tune to the premium cable channel you want to view.
Note:To use special features such as Favorite Channels and Channel Captions, ANT1 must be selected in the SET UP menu under
Prog Chan.  
CONNECTIONS ON BACK OF THE  PTV
CABLE BOX
INCOMING 
CABLE
CABLES NOT SUPPLIED
S-
VIDEO
VIDEO
AUDIO
L
R VIDEO
Y
P
B
PR
PROG 
OUTTO 
         AMPL
RINPUT 
1INPUT 
2INPUT 
3 COMPONENT ANT 1
ANT 2 SPLIT OUT12
AUDIO
   VIDEO INPUTS
ANT OUTANT IN
S-
VIDEO
VIDEO
AUDIO
L
R VIDEO
Y
P
B
PR
PROG 
OUTTO 
         AMPL
RINPUT 
1INPUT 
2INPUT 
3 COMPONENT ANT 1
ANT 2 SPLIT OUT12
AUDIO
   VIDEO INPUTS
CONNECTIONS ON BACK OF THE PTV
CABLES NOT SUPPLIED Incoming 
Cable
CABLE BOX
ANT INANT OUT
VCR
L
R AUDIO OUTVIDEO OUT
ANT OUT ANT IN  
						

							10 l
OPTIONAL EQUIPMENT CONNECTIONS
VCR and Cable Box Connection (contd.)
Recording a premium (scrambled) cable channel 
Procedure
1. Select ANT2 in the SET UP menu under Prog Chan.
2. Press the TV/VIDEO button on the remote control to select the video input (VIDEO 1, VIDEO 2, etc.) connected to your VCR.
3. Turn the VCR ON.
4. Tune the VCR to Channel 3 or 4, depending on the switch setting on the back of VCR.
5. Using your cable box, tune to the premium cable channel you want to record.
6. Begin recording.
Note:To view a different channel while recording:
• Select ANT1 in the SET UP menu under Prog Chan.
• Press the TV/VIDEO button on the remote control to TV mode.
• Tune the television to a channel (except another premium cable channel).
Amplifier Connection (TO AUDIO AMP)
To listen through a separate stereo system, connect an external audio amplifier TO AUDIO AMP outputs on back of television.
Note:TO AUDIO AMP terminals cannot be connected directly to external speakers.
Audio Adjustments
1. Select SPEAKERS ON located in the onscreen AUDIO menu. 
2. Set amplifier volume to minimum.
3. Adjust television volume to desired level.
4. Adjust amplifier volume to match the television.
5. Select SPEAKERS OFF & VARIABLE AUDIO OUT from AUDIO menu. 
6. Volume, mute, bass, treble and balance are now controlled through the television. 
Note:Select SPEAKERS OFF & FIXED AUDIO OUT to control audio functions through the external amplifier.
Front Control Panel
The front control panel can be used to access menus and switch video mode when the remote control is not available.   
A second VCR, Camcorder, a video disc player, video game equipment or DSS equipment can also be connected to the
video inputs. See the optional equipment manual for details.
Procedure
1. Connect equipment to front Audio/Video input jacks.
2. Press TV/VIDEO button to select VIDEO 4 input mode.
3. Operate optional equipment as instructed in equipment manual.
CABLES NOT SUPPLIED CONNECTIONS ON BACK OF TV
External AmplifierS-
VIDEO
VIDEO
AUDIO
L
R VIDEO
Y
P
B
PR
PROG 
OUTTO 
         AMPL
RINPUT 
1INPUT 
2INPUT 
3 COMPONENT ANT 1
ANT 2 SPLIT OUT12
AUDIO
   VIDEO INPUTS
ACTION TV/VIDEOq CHANNEL pS-VIDEOVIDEO4 L-AUDIO-Rt VOLUME uPOWER
ON/OFF INDICATOR
POWER ON/OFF
CAMCORDER
Note:The ON/OFF indicator LED (red) will be lit when set is on. 
Note:The S-VIDEO connection provides higher quality picture. It
overrides VIDEO 4 connections. Use INPUT 4, AUDIO L
and R with S-VIDEO connection. 
						

							OPTIONAL EQUIPMENT CONNECTIONS
11 l
Program Out Connection (PROG OUT) 
To use the television audio and video with optional equipment, connect the PROG OUT and TO AUDIO AMP connections on the back of
the television.
Procedure
1. Connect optional equipment to PROG OUT and TO AUDIO AMP terminals.
2. PROG OUT terminal display is the same as onscreen display.
3. See optional equipment manual for further instructions for recording and monitoring.
Digital TV - Set-Top Box (DTV-STB) or DVD Connection
This television is capable of displaying 1080i and 480p DTV signals when connected to a DTV Tuner set-top-box (STB). In
order to view DTV programming, the STB must be connected to the component video inputs (Y, P
B, PR) of the television. A
DTV signal must be available in your area. Select the output of the STB to either 1080i or 480p.
This television also utilizes a progressive scan doubler, which de-interlaces the NTSC signal and progressively scans the
image. This allows you to sit close to the TV and not see the thin black horizontal lines (venetian blind effect) associated
with interlaced TV pictures.
Use this diagram to connect the Panasonic DTV-STB (Digital TV-Set-Top Box) or DVD Player to the back of your TV. 
Note:There are 2 sets of three video inputs, Y, PB, and PR. Separate component color inputs provide luminance and color separation.
Use the L (left) and R (right) audio inputs.
CABLES NOT SUPPLIED CONNECTIONS ON BACK OF TV
VCR
OR MONITOR
S-
VIDEO
VIDEO
AUDIO
L
R VIDEO
Y
P
B
PR
PROG 
OUTTO 
         AMPL
RINPUT 
1INPUT 
2INPUT 
3 COMPONENT ANT 1
ANT 2 SPLIT OUT12
AUDIO
   VIDEO INPUTS
S-
VIDEO
VIDEO
AUDIO
L
R VIDEO
Y
P
B
PR
PROG 
OUTTO 
         AMPL
RINPUT 
1INPUT 
2INPUT 
3 COMPONENT ANT 1
ANT 2 SPLIT OUT12
AUDIO
   VIDEO INPUTS
 TERMINALS ON BACK OF DTV-STB OR DVD PLAYER
DIGITAL  TV OUTPUT
PRPBYMAIN 
VIDEO
NTSC  OUTPUT
R-AUDIO-L
S-VIDEO
L-AUDIO-R
-VIDEO
DTV INPUT TERMINALS ON BACK OF TV
CABLES NOT SUPPLIED 
						

							12 l
SPECIAL REMOTE BUTTONS
Special Remote Buttons
ASPECT Button
The ASPECT button on the remote control lets you choose one of four display modes, depending on the format of the
received signal and your preferences.  
BBE Button
Press this button to turn the BBE® sound feature On or Off. BBE® Sound technology enhances speech intelligibility and
restores the dynamic range of musical passages to provide outstanding natural sound.
SAP Button
Press this button to let you cycle through different audio modes. If you are receiving a stereo program and you press the
SAP button, you can cycle between STEREO and MONO. 
Customer Options depending on Component Input Signal 
INPUT SIGNAL  DISPLAY ON SCREENASPECT BUTTON OPTIONS
1080i16:9 onlyno options
480p (16:9)Default to 16:94:3, Full or Zoom (see below)
480p (4:3) Default to FULL mode
Note: Will stretch picture horizontally4:3, Full or Zoom (see below)
480iDefault to JUST mode4:3, Full, Just or Zoom (see below)
Input Signal 
ASPECT Image on
16:9 Screen SizeExplanation
    4:3
This will display a 4:3 picture at its 
standard 4:3 size with gray side bars.
(Not recommended for viewing 4:3 
pictures, may cause a permanent 
image on screen if displayed for a 
prolonged period of time.)
 ZOOM
This will expand the 4:3 picture 
uniformly (width and height) to full 
screen width and then reposition the 
picture vertically. (Recommended for 
letterbox pictures.)
 FULL
This will show picture at full 
screen size. (Recommended for 
anamorphic pictures.)
 JUST
This will stretch the right and left 
edges of a 4:3 picture to fill the 
screen. The center of the screen
will have aspect correction applied.
The size of the picture will depend on 
the original signal. (Recommended 
for regular TV viewing.)
4
3
16
9
16
9
16
9
480i or 480p
480i or 480p
480i or 480p
480i  
						

							PIP AND SPLIT OPERATION
13 l
PIP and Split Operation
Note: The shapes of PIP and SPLIT function buttons may vary depending on the remote control.
PIP Operation
This television includes a two-tuner Picture In Picture (PIP) feature. This allows you to watch two (2) live broadcasts at the
same time with or without an external video source such as a VCR, cable box, etc.
  
Split Operation 
This feature lets you watch two different channels side by side with or without an external video source. 
PIP and Split Operation With a Cable Box 
To view premium (scrambled) cable channels through your cable box in the Main Picture:
Note:Use this procedure if you want to watch premium cable channels in the Main Picture while viewing a television program or video
in the PIP or Split frame.
Procedure
rSelect ANT 2 in the SET UP menu under Prog Chan (Program Channels).
rTune PTV to Channel 3.
rPress  or  on the remote control to display the PIP or Split frame.
Note:Audio is from the Main Picture only.
rVerify the Cable box is ON.
rChoose channels for the Main Picture by tuning the cable box.
rChoose channels for the PIP or Split frame by pressing  .
Note:Swap is not available when using the cable box to tune channels. If your cable box has video output, it can be
connected to the PTV to allow you to use all PIP or Split functions. See the equipment manual for more information.
Main Picture
PIP Frame
rConnect incoming cable to ANT 1 input on back of TV
rPress   to display PIP frame.
rSelect channels for the PIP frame by pressing  .
rSelect channels for the Main picture by pressing 
or use the remote control numeric keypad.
rPress  to switch the PIP and MAIN PICTURE source.
rPress  to view picture source status. 
rPress   to cancel PIP frame.
PIP
     PIP CH
or
CHCH
SWAP
RECALL
PIP
Note:Audio is from Main Picture only.
Split Picture
no AudiorPress   to display Split screen.
rSelect channels for the Split screen by pressing  .
rSelect channels for the Main picture by pressing 
or use the remote control numeric keypad.
rPress  to switch the SPLIT SCREEN and MAIN PICTURE
source.
rPress  to view picture source status.
rPress   to cancel Split screen. 
SPLIT
 PIP        CH
or
CHCH
SWAP
RECALL
SPLIT Main Picture
with Audio
Note:Audio is from Main Picture only.
PIPSPLIT
  PIP        CH 
						

							14 l
PIP AND SPLIT OPERATION
PIP and Split Operation (contd.)
Note:The shapes of PIP and SPLIT function buttons may vary depending on the remote control. 
TV/VIDEO Button 
Press when PIP or Split frame is displayed to select desired input mode
.  
Search Button (PIP and Split) 
This feature lets you scan through all available channels. 
Move Button (PIP only)
This feature is used to move PIP frame to one of four corners. 
 
PIP MIN and PIP MAX Buttons
While PIP frame is displayed, press PIP MIN or PIP MAX button to vary the size of PIP frame.
    
PIP Frame
Main Picture
CH #COMPONENT 1COMPONENT 2 VIDEO 1
VIDEO 2 VIDEO 3VIDEO 4
Main Picture
COMPONENT 2 VIDEO 1
VIDEO 2 VIDEO 3
Split Frame
CH #COMPONENT 1
VIDEO 4
Search Frames
rPress   or   to display PIP or Split frame.
rPress   to display search frames.
rPress  again to stop search feature.
PIP or Split frame channel will be the last active
search frame.
rPress   or   to cancel PIP or Split frame. 
PIPSPLIT
SEARCHOPEN/CLOSEp
SEARCHOPEN/CLOSEp
PIPSPLIT Main Picture
2
3
4
PIP Frame
rPress   to display PIP frame.
rPress   to position PIP frame to desired corner.
rPress   to cancel PIP frame. 
PIP
 MOVE
PIP
Main Picture
MIN
rPress   to display PIP frame.
rPress   or   to size PIP frame.
rPress   to cancel PIP frame. 
PIP
 PIP MIN PIP MAX
PIP Main Picture
MAX 
						

							PIP AND SPLIT OPERATION
15 l
PIP and Split Operation (contd.)
Note:The shapes of PIP and SPLIT function buttons may vary depending on the remote control.
Freeze Button (PIP and Split)
This feature is used to stop action in PIP or Split frame.
  
Main Picture Freeze Feature 
This feature is used to stop action of the Main Picture and display it on a Split or PIP freeze frame.
  
PIP, Split and Freeze Mode Buttons Operational Chart
  This chart indicates the buttons that are operational with PIP, Split or Main Picture Freeze mode.  
REMOTE
BUTTONSPIP MODESPLIT MODEMAIN PICTURE 
FREEZE MODE
PIP MINSize Smaller No Effect No Effect
PIP MAXSize Larger No Effect No Effect
FREEZEFreeze PIP Frame Freeze Split Frame Display or Delete
PIP CHChange Channel Change Channel No Effect
SEARCHDisplays Search Frames Displays Search Frames No Effect
PIPDisplays PIP Frame Displays PIP Frame No Effect
SPLITDisplays Split Frame Displays Split Frame No Effect
MOVEMove PIP Frame No Effect Move PIP Frame
SWAPSwap With Main Picture Swap With Main Picture No Effect
rPress   or   to display PIP or Split frame.
rPress   to stop PIP or Split frame action.
rPress   again to continue action. 
rPress   or   to cancel PIP frame. PIPSPLIT
FREEZETV/VCR
FREEZETV/VCR
PIPSPLIT Main Picture
Freeze frame
rTo stop action for Main picture, press   while
PIP or Split frame is not displayed.
rMain Picture freeze will be displayed in a PIP or Split
frame, depending on the selection in the Freeze menu
located in Picture Other ADJ2 section (refer to page 33). 
rPress   again to cancel Main Picture freeze
frame.
Note: While Main Picture freeze frame is displayed, only
move button is active for PIP, all other PIP and
Split buttons has no effect (see chart below). 
FREEZETV/VCR
FREEZETV/VCR
Main Picture
Main Picture 
Freeze frame
PIP or Split.  
						

							16 l
REMOTE CONTROL OPERATION (MODEL PT-47WX42C)
Remote Control Operation (model PT-47WX42C) 
               
Press to turn ON and OFF.
POWER
MUTE
 
Press to mute sound. Press to display and
cancel CC (Closed Caption).
SAP
 
Press to access second audio program.
TV/VIDEO
 
Press to select TV or input modes.
Press to select remote operation.
 
 TV 
V
CRDBS/
CBL DV
D
ACTION
Press to access menus.
Press to select next or previous channel and 
navigate in menus.
CH
CH
Press to adjust TV sound and navigate in 
menus.
VOL  VOL
EXIT
DBS functions button.
SEARCH
GUIDE
SEARCH - Press for PIP or SPLIT search.
GUIDE - DBS functions button.
*PIP MIN
REW*SPLIT
 PLAY*PIP MAX
FF
*SWAP
PA U S E*MOVE
STOP*PIP
REC
*FREEZE
TV/VCR *PIP CH
VCR /DBS CH
*Split and PIP function buttons
Component function buttons
u
Press numeric keypad to select any channel.
7
4
12
5
8
0
9
6
3
R-TUNE
Press to switch to previously viewed 
channel or input modes.
Battery Installation
Use two AA batteries:
Remove battery cover by pushing in and up near arrow.
Install batteries matching (+) and (-) polarity signs.
Replace the battery cover.
Note:Incorrect installation can cause battery leakage and
corrosion that will damage the Remote Control
Precautions
• Replace batteries in pairs.
• Do not mix battery types (zinc carbon
with alkaline).
• Do not recharge, heat, short-circuit,
disassemble, or burn batteries.
ASPECT
PROG
ASPECT - Select picture size (ratio) to match 
programming format.
PROG - Press to enter minor number in a 
compound number.
RECALL
Press to display time, channel, sleep timer, 
and other options.
BBE
MENU
 
BBE - Press to turn on or off.
MENU- Press to access DBS or DVD menus.
EUR7613Z40 
						

							REMOTE CONTROL OPERATION (MODEL PT-47WX42C)
17 l
Mode Operational Key Chart
This chart defines the keys that are operational in the selected component modes (TV, VCR, DBS, CABLE or DVD) after
programming (if needed).    
KEY NAME TV  MODECABLE MODEDBS MODE
POWER   POWER POWER POWER
SAPSAP ON/OFF--
MUTE    MUTETV MUTETV MUTE
TV/VIDEO INPUT SWITCHTV INPUT SWITCHTV INPUT SWITCH
BBE/MENUBBE ON/OFF-DBS MENU
CHAN  p CHANNEL UPCABLE CHANNEL UPDBS NAVIGATION UP
CHAN  q CHANNEL DOWNCABLE CHANNEL DOWNDBS NAVIGATION DOWN
VOL u VOL +TV VOL +DBS NAVIGATION RIGHT
t  VOL  VOL -  TV VOL -DBS NAVIGATION LEFT
ACTION ACTION-DBS MENU
RECALL DISPLAYTV DISPLAYDBS PROG. INFO
EXIT--DBS EXIT
SEARCH/GUIDETV PIP/SPLIT SEARCH-DBS GUIDE
1 DIGIT 1DIGIT 1DIGIT 1
2 DIGIT 2DIGIT 2DIGIT 2
3 DIGIT 3DIGIT 3DIGIT 3
4 DIGIT 4DIGIT 4DIGIT 4
5 DIGIT 5DIGIT 5DIGIT 5
6 DIGIT 6DIGIT 6DIGIT 6
7 DIGIT 7DIGIT 7DIGIT 7
8 DIGIT 8DIGIT 8DIGIT 8
9 DIGIT 9DIGIT 9DIGIT 9
0 DIGIT 0DIGIT 0DIGIT 0
R-TUNEPREVIOUS CHAN 
OR VIDEO MODECABLE PREVIOUS 
CHANNELPREVIOUS DBS CHANNEL
ASPECT
PROGTV ASPECT-DBS PROGRAM/DASH
 PIP MIN
 PIP MAX--
SWAP
PA U S ESWAP PIP OR  SPLIT 
WITH MAIN PICTURE--
MOVE
STOP MOVE PIP--
PIP
RECORD PIP ON / OFF--
FREEZE
TV/VCRTV PIP FREEZE--
 PIP CH
 VCR/DBS CH   PIP OR SPLIT CHAN 
q-DBS CHANNEL DOWN
  PIP CH
  VCR/DBS CH   PIP OR SPLIT CHAN 
p-DBS CHANNEL UP 
						

							18 l
REMOTE CONTROL OPERATION (MODEL PT-47WX42C)
Mode Operational Key Chart (contd.)
 
KEY NAME VCR MODEDVD MODE
POWER POWER POWER
SAP--
MUTETV MUTETV MUTE
TV/VIDEOTV INPUT SWITCHTV INPUT SWITCH
BBE/MENU--
CH p-NEXT CHAPTER
CH  q - PREVIOUS CHAPTER
VOL u    TV VOLUME + NAVIGATION RIGHT
t VOLTV VOLUME - NAVIGATION LEFT
ACTION--
RECALLONSCREEN VCR
DISPLAYDVD DISPLAY
EXIT--
SEARCH/GUIDE--
1--
2--
3--
4--
5--
6--
7--
8--
9--
0--
R-TUNE--
ASPECT
PROG--
 PIP MIN
>
SWAP
PAUSEVCR PAUSEDVD STILL
MOVE
STOPVCR STOPDVD STOP
PIP
RECORDVCR RECORD-
FREEZE
TV/VCRTV/VCR SWITCHOPEN/CLOSE
PIP CH
VCR/DBS CH   VCR CHANNEL 
DOWNSLOW -
 PIP CH
 VCR/DBS CH  VCR CHANNEL UPSLOW +