Panasonic Hd Integrated Camera Aw He50hn Operating Instructions

\f1
Web setting screen
Preset position se\>tting screen
p Preset
This selects the pr\Reset position to b\Re 
operated from the pull\R‑down menu.
This is used to re\Rgister the current \Rstatus 
in the preset posi\Rtion now selected on the 
pull‑down menu.
It does not functio\Rn if “Home” has been 
selected on the pul\Rl‑down menu.
The camera direction moves to the preset 
position which is n\Row selected on the 
pull‑down menu.
The settings that \Rare reproduced at t\Rhis 
position are the s\Rettings...

\f\b
Web setting screen
p \brightness
Use this to adjust\R the image brightness 
manually.
Use this to make the image darker.
It does not work during automatic 
adjustments.
Use this to make the image lighte\Rr.
It does not work during automatic 
adjustments.
Use this to adjust\R the image brightness 
automatically.
p Control pad and its buttons
To adjust the image\R in the horizontal 
or vertical direction (pan\Rning or 
tilting), left
‑click the pad and the \R
b

uttons.
The more the outsi\Rde of the...

\f3
Web setting screen
System
This menu has items that r\Relate to the genlo\Rck phase adjustment\R and camera’s output image set\Rtings.
p Genlock (AW‑\fE50S only)
This item’s setting is refle\Rcted immediately.
 \forizontal Phase [–2\>06 to +49]
This is used to ad\Rjust the horizontal phase during 
genlock.
 Subcarrier Phase  \>Coarse
 [0° to 315
°]
This is used to ad\Rjust coarsely the co\Rlor phase during 
genlock.
This setting is valid for the VBS signal output.
 Subcarrier Phase  \>Fine [–127 to...

\f4
Web setting screen
p Output
This item’s setting is refle\Rcted when the Set b\Rutton is 
pressed.
 Format [1080i, 720p, 480i]
The video format is changed on t\Rhis screen.
 Down CONV. Mode
 [Squeeze,
 SideCut, Letter\box]
The down‑conversion mode is sel\Rected here.
SqueezeWhen the 4:3 aspect\R ratio has been set \R
for the monitor scre\Ren, the images are\R 
squeezed horizontally and extended 
vertically changing the\R view of the angle.
SideCutWith the vertical height serving as the 
reference, the...

\f5
Web setting screen
p Other
This item’s setting is refle\Rcted when the Set b\Rutton is 
pressed.
 Install Position [Desktop, \fanging]
“Desktop” or “Hanging” is selected here a\Rs the method 
used to install th\Re unit.
Desktop Stand‑alone installation\R
Hanging Suspended installa\Rtion
p   When “Hanging” has been selected,\R the top

, bottom, 
left and right of the images\R will be reversed, and  
up/down/left/right control for panning and til\Rting will 
also be reversed.
 Preset Speed [1 to\>...

\f\f
Web setting screen
wqUser mng.
The authorization of those u\Rsers who can access t\Rhe camera from a PC or AW‑RP50 and those IP \Raddresses, from which the 
camera can be accessed, is\R registered on thi\Rs screen in order t\Ro restrict any other access.
The screen itself co\Rnsists of two tabs, “User auth.” and “Host auth”.
User auth. screen
p User auth.

User authorization is set to \R“On” or “Off ” here.
Enter the setting \Rusing the Set button.
p User name [1 to 32 \>half‑size c haracters]

The...

\f7
Web setting screen
\fost auth. screen
p \fost auth.

Host authorization is set to \R“On” or “Off ” here.
p IP address

The IP address of \Rthe PC from which a\Rccess to the 
camera is allowed is input here.
The host name canno\Rt be input as the \RIP address.
wpWhen the “IP address/subnet\R mask length” is input, 
the PCs which are a\Rllo
wed to access the came\Rra can 
be restricted on a subnet b\Ry subnet basis. 
If, for instance, “19\b.1\f8.0.1/\b4” has been input an\Rd 
the “\b. Camera control”...

\f8
Web setting screen
wqServer
This screen has ite\Rms that relate to \Rthe NTP server addresses, port numbers and other N\RTP server settings.
NTP screen
p Time adjustment

Select one of the f\Rollowing settings as t\Rhe time 
adjustment method.\R
The time is adjust\Red by the method select\Red here and 
used as the unit’s standard time.
Off The time is counted\R from 0:00 on 
January 1, 1990 as the u\Rnit’s startup 
time.
Synchronization 
with NTP server The time automatica\Rlly adjusted in...

\f9
Web setting screen
wqNetwork
This screen has ite\Rms that relate to \Rthe network settings, DDNS (Dynamic DNS\R) and SNMP (Simple\R Network Management 
Protocol).
It consists of the \Rthree tabs of “Network”, “DDNS” and “SNMP”.
Network screen
p IP network
 D\fCP

Whether the DHCP f\Runction is to be us\Red is set by 
selecting “On” or “Off ” here. Set the DHCP server in such 
a way that the same IP\R address cannot be \Rused by PCs 
without the DHCP f\Runction or by other network cameras. 
For...

70
Web setting screen
 Subnet mask

Input the unit’s subnet mask here\R if the DHCP functi\Ron is 
not going to be us\Red.
 Default gateway

Input the unit’s default gateway if the DHCP funct\Rion is 
not going to be us\Red.
wpMultiple IP addres\Rses cannot be used \Rfor the default 
gate
way even when the DHCP f\Runction is used.  
For details on the \RDHCP server settings, consult your 
network administrator.
 DNS

Whether the DNS se\Rrver address is to b\Re acquired 
automatically (Auto) or manually...