Panasonic Hd Integrated Camera Aw He50hn Operating Instructions
Here you can view all the pages of manual Panasonic Hd Integrated Camera Aw He50hn Operating Instructions. The Panasonic manuals for Camera are available online for free. You can easily download all the documents as PDF.
Page 81
![Page 81
81
Setting/releasing t\whe limiters
ww\basic limiter operat\>ions
1 Press the [MENU] b\>utton.
Tap the button (rather than pressin\Rg it). When it is
pressed for \b
seconds, a men
u will appear.
If this happens, press the [MENU]\R button again for
\b
seconds to clear the\R menu.
Then star
t again from step \R
1.
2 Press the [], [], [] or [] button for
2
seconds while holdin\>g down the [PRESET]
b
utton.
The limiter for the upper limit\R, lower limit, left lim\Rit or
right limit is set...](http://img.usermanuals.tech/thumb/58/69565/w300_aw-he50hn_en_om_d-80.png "Page 81
81
Setting/releasing t\whe limiters
ww\basic limiter operat\>ions
1 Press the [MENU] b\>utton.
Tap the button (rather than pressin\Rg it). When it is
pressed for \b
seconds, a men
u will appear.
If this happens, press the [MENU]\R button again for
\b
seconds to clear the\R menu.
Then star
t again from step \R
1.
2 Press the [], [], [] or [] button for
2
seconds while holdin\>g down the [PRESET]
b
utton.
The limiter for the upper limit\R, lower limit, left lim\Rit or
right limit is set...")
81 Setting/releasing t\whe limiters ww\basic limiter operat\>ions 1 Press the [MENU] b\>utton. Tap the button (rather than pressin\Rg it). When it is pressed for \b seconds, a men u will appear. If this happens, press the [MENU]\R button again for \b seconds to clear the\R menu. Then star t again from step \R 1. 2 Press the [], [], [] or [] button for 2 seconds while holdin\>g down the [PRESET] b utton. The limiter for the upper limit\R, lower limit, left lim\Rit or right limit is set...
Page 82
![Page 82
8\b
Setting/releasing t\whe limiters
wwReleasing the limite\>rs
The limiter positi\Rons that are set ca\Rn be released by
following the steps bel\Row.
When the position \Ris released, the t\Rally lamp blinks twice.
1 Press one of the [\>CAM1] to [CAM4] buttons to
select the unit.
2 Release the limiters by taking the steps\> below.
wp Releasing the upper\> limit position of t\>he
movement range
P
erform the steps in “Basic limiter operations”.
(Press the [MENU] \Rbutton quickly and then press\R
the...](http://img.usermanuals.tech/thumb/58/69565/w300_aw-he50hn_en_om_d-81.png "Page 82
8\b
Setting/releasing t\whe limiters
wwReleasing the limite\>rs
The limiter positi\Rons that are set ca\Rn be released by
following the steps bel\Row.
When the position \Ris released, the t\Rally lamp blinks twice.
1 Press one of the [\>CAM1] to [CAM4] buttons to
select the unit.
2 Release the limiters by taking the steps\> below.
wp Releasing the upper\> limit position of t\>he
movement range
P
erform the steps in “Basic limiter operations”.
(Press the [MENU] \Rbutton quickly and then press\R
the...")
8\b Setting/releasing t\whe limiters wwReleasing the limite\>rs The limiter positi\Rons that are set ca\Rn be released by following the steps bel\Row. When the position \Ris released, the t\Rally lamp blinks twice. 1 Press one of the [\>CAM1] to [CAM4] buttons to select the unit. 2 Release the limiters by taking the steps\> below. wp Releasing the upper\> limit position of t\>he movement range P erform the steps in “Basic limiter operations”. (Press the [MENU] \Rbutton quickly and then press\R the...
Page 83
83 Safe mo\fe wwConcerning the safe mode The unit is equipp\Red with a safe mode for protection from \R damage. When a safe mode is established, some or al\Rl of operations will no longer be \Raccepted. Trouble‑triggered safe mode When the unit has \Rdetected trouble, the “trouble‑triggered safe mode” is estab lished: In this mode, the unit’s functions are shut \Rdown and then the un\Rit is returned to its regular sta\Rtus in about 30 seconds after it ha\Rs been started up again or th\Re initial...
Page 84
84 Notes on Win\fows Vista® / Win\fows® 7 When using Microsof\Rt® Windows Vista® or Microsoft® Windows® 7, symptoms described in this docume\Rnt may happen. If any of them occurred, \Rfollow the instructions to solve each problem. The symptoms that \Rhappen when using \RWindows Vista ® may also happen when\R using Windows® 7. If using Windows 7, refer to the section “Precautions when u\Rsing Windows Vista” in addition to th\Re section “Precautions when using Windows 7” in this document. p This document...
Page 85
![Page 85
85
Notes on Win\fows Vista® / Win\fows® 7
wwPrecautions when u\>sing Windows Vista
Symptom 1
wp When accessing the w\Reb browser , the following message is di\Rsplayed on the information bar.
“Pop
‑up bloc
ked. To see this pop
‑up or additional o\Rptions click here…”
Solution
Add the IP address\R of the product to \R“Trusted sites”, and \Rperform the security setting.
1 Start up the web browser, and click “Internet Options” on the Tools menu.
2 Click the [Security] tab. Then, select the “Trusted...](http://img.usermanuals.tech/thumb/58/69565/w300_aw-he50hn_en_om_d-84.png "Page 85
85
Notes on Win\fows Vista® / Win\fows® 7
wwPrecautions when u\>sing Windows Vista
Symptom 1
wp When accessing the w\Reb browser , the following message is di\Rsplayed on the information bar.
“Pop
‑up bloc
ked. To see this pop
‑up or additional o\Rptions click here…”
Solution
Add the IP address\R of the product to \R“Trusted sites”, and \Rperform the security setting.
1 Start up the web browser, and click “Internet Options” on the Tools menu.
2 Click the [Security] tab. Then, select the “Trusted...")
85 Notes on Win\fows Vista® / Win\fows® 7 wwPrecautions when u\>sing Windows Vista Symptom 1 wp When accessing the w\Reb browser , the following message is di\Rsplayed on the information bar. “Pop ‑up bloc ked. To see this pop ‑up or additional o\Rptions click here…” Solution Add the IP address\R of the product to \R“Trusted sites”, and \Rperform the security setting. 1 Start up the web browser, and click “Internet Options” on the Tools menu. 2 Click the [Security] tab. Then, select the “Trusted...
Page 86
![Page 86
8\f
Notes on Win\fows Vista® / Win\fows® 7
Symptom 2
wpEasy IP Setup Soft\Rware does not displ\Ray the detected IP a\Rddress .
Solution
Check the firewall settings. If firewall is activated, add the web browser or Easy IP Se\Rtup Software to the [Excepti\Rons] tab on
the “Windows Firewall Settings” menu.
1 Open the control pa\Rnel, and click “Security”.
2 Click “Allow a program through Windows Firewall” of “Windows Firewall”. (Refer to the screensho\Rt.)
3 Click the [Continue] button on the “User...](http://img.usermanuals.tech/thumb/58/69565/w300_aw-he50hn_en_om_d-85.png "Page 86
8\f
Notes on Win\fows Vista® / Win\fows® 7
Symptom 2
wpEasy IP Setup Soft\Rware does not displ\Ray the detected IP a\Rddress .
Solution
Check the firewall settings. If firewall is activated, add the web browser or Easy IP Se\Rtup Software to the [Excepti\Rons] tab on
the “Windows Firewall Settings” menu.
1 Open the control pa\Rnel, and click “Security”.
2 Click “Allow a program through Windows Firewall” of “Windows Firewall”. (Refer to the screensho\Rt.)
3 Click the [Continue] button on the “User...")
8\f Notes on Win\fows Vista® / Win\fows® 7 Symptom 2 wpEasy IP Setup Soft\Rware does not displ\Ray the detected IP a\Rddress . Solution Check the firewall settings. If firewall is activated, add the web browser or Easy IP Se\Rtup Software to the [Excepti\Rons] tab on the “Windows Firewall Settings” menu. 1 Open the control pa\Rnel, and click “Security”. 2 Click “Allow a program through Windows Firewall” of “Windows Firewall”. (Refer to the screensho\Rt.) 3 Click the [Continue] button on the “User...
Page 87
![Page 87
87
Notes on Win\fows Vista® / Win\fows® 7
Symptom 4
wpThe screens of the \Radministrator console or the\R windows of the bro wser are not displ\Rayed properly. (Refer to the screensho\Rt.)
Solution
Check the font size (DPI) of screensh\Rot by clicking “Personalize”– “Adjust font size (DPI)”.
If the DPI is set \Rto “Larger scale”, set\R to “Default scale”.
1 Right
‑click on the desktop
.
2 Click “Personalize”.
3 Click “Adjust font size (DPI)”.
4 Click the [Continue] button on the “User Account...](http://img.usermanuals.tech/thumb/58/69565/w300_aw-he50hn_en_om_d-86.png "Page 87
87
Notes on Win\fows Vista® / Win\fows® 7
Symptom 4
wpThe screens of the \Radministrator console or the\R windows of the bro wser are not displ\Rayed properly. (Refer to the screensho\Rt.)
Solution
Check the font size (DPI) of screensh\Rot by clicking “Personalize”– “Adjust font size (DPI)”.
If the DPI is set \Rto “Larger scale”, set\R to “Default scale”.
1 Right
‑click on the desktop
.
2 Click “Personalize”.
3 Click “Adjust font size (DPI)”.
4 Click the [Continue] button on the “User Account...")
87 Notes on Win\fows Vista® / Win\fows® 7 Symptom 4 wpThe screens of the \Radministrator console or the\R windows of the bro wser are not displ\Rayed properly. (Refer to the screensho\Rt.) Solution Check the font size (DPI) of screensh\Rot by clicking “Personalize”– “Adjust font size (DPI)”. If the DPI is set \Rto “Larger scale”, set\R to “Default scale”. 1 Right ‑click on the desktop . 2 Click “Personalize”. 3 Click “Adjust font size (DPI)”. 4 Click the [Continue] button on the “User Account...
Page 88
88 Notes on Win\fows Vista® / Win\fows® 7 wwPrecautions when u\>sing Windows 7 Symptom 1 wp Screen is deformed. / When activating the compatibi\Rlity view, part of the screen is \Rnot displayed or a pop‑up window appears to sa y that the screen i\Rs not displayed again. Solution Check “Display all websites in Compati\Rbility View” on the “Compatibility View Settings” window. 1 Start up the web browser, and click “Tools” on the menu bar. 2 Click “Compatibility View Settings”. 3 Check “Display all...
Page 89
![Page 89
89
Notes on Win\fows Vista® / Win\fows® 7
Symptom 4
wpSoftware upgrade is impossible even when selecting a\R file from the dia\Rlog box displayed from the window or tab to upgrade
the software
.
Solution
Perform the custom level setting on the \R“Security Settings” window.
1 Start up the web browser, and click “Tools” on the menu bar.
2 Select “Internet Options”.
3 Click the “Security” on the displayed window, and click the [Custom Level…]
button.
4 Click “Include local direct\Rory path when...](http://img.usermanuals.tech/thumb/58/69565/w300_aw-he50hn_en_om_d-88.png "Page 89
89
Notes on Win\fows Vista® / Win\fows® 7
Symptom 4
wpSoftware upgrade is impossible even when selecting a\R file from the dia\Rlog box displayed from the window or tab to upgrade
the software
.
Solution
Perform the custom level setting on the \R“Security Settings” window.
1 Start up the web browser, and click “Tools” on the menu bar.
2 Select “Internet Options”.
3 Click the “Security” on the displayed window, and click the [Custom Level…]
button.
4 Click “Include local direct\Rory path when...")
89 Notes on Win\fows Vista® / Win\fows® 7 Symptom 4 wpSoftware upgrade is impossible even when selecting a\R file from the dia\Rlog box displayed from the window or tab to upgrade the software . Solution Perform the custom level setting on the \R“Security Settings” window. 1 Start up the web browser, and click “Tools” on the menu bar. 2 Select “Internet Options”. 3 Click the “Security” on the displayed window, and click the [Custom Level…] button. 4 Click “Include local direct\Rory path when...
Page 90
Printed in JapanF0410S1050 D Panasonic Solutions \>Company 3 Panasonic Way, Secaucus, NJ 07094 Tel: 877‑803‑849\b www.panasonic.com/broad\Rcast e‑mail: MediaProSer [email protected] Panasonic Canada Inc\>. 5770 Ambler Drive, Mississauga, Ont\Rario L4W \bT3 Tel: 905 ‑\f\b4‑5010 Panasonic de México\> S.A. De C.V. Casa Matriz: Felix Cuevas No. \f Pisos \b y 3 Col.\R Tlacoquemecatl Del Valle Del.Benito Juárez México, D.F., C.P.03\b00 Tel: 55 ‑5488‑1000 Fax: 55 ‑5575‑\f7\f3...