Panasonic Hd Integrated Camera Aw He50hn Operating Instructions

Operating Instruct\>ions 
ttings>
\fD Integrated Camera\>
Model No. AW‑HE50HN
 AW‑HE50SN
3TR00\f484BAA 

\b
Contents
\before use  ..................\>..................\>..................\>..................\>.  3
Overvie w 
 ..................\R..................\R..................\R..................\R  3
Concerning the Operating Instr

uctions 
 ..................\R........  3
Required personal co\Rmputer environment 
 ..................\R...  4
Trademar

ks and registered \Rtrademarks 
 ..................\R.......  4
About copyright and licence 
 ..................\R..................\R.......  4...

3
Before use
wwOverview
wp This unit is a comp\Ract full HD camera integr ated with a 
pan
‑tilt head and featur
 ing a newly developed 1/3
‑inch full 
HD MOS sensor and \Rdigital signal pro\Rcessor (DSP).
wp In addition to its\R optical 18 z

oom lens, the unit comes 
with a 10 digital zoom to achieve high
‑quality shooting 
that ov

erflows with ambiance.
wpTwo models are a

vailable: the HDMI model AW‑HE50H 
which is ideal for distributing the signals \Rof TV conference 
and other video events, and...

4
Before use
wwRequired personal computer 
environment
CPU Intel® CoreTM\b DUO \b.4 GHz or faster 
recommended
Memory 51\b
 MB or more
(When using Microso\Rft® Windows Vista®: 
1
 GB or more, and when using 
Microsoft® Windows® 7: 1 GB [3\b bits] 
or \b
 GB [\f4 bits] or more)
Network function 10Base
‑T or 100Base‑TX port 

1
Image display 
function Resolution:
   10\b4  7\f8 pix

els or 
more
Color generation:
   True Color \b4 bits or\R 
more
Suppor

ted 
operating 
system and
Web browser Microsoft
®...

5
Before use
wwDisclaimer of warranty
IN NO EVENT SHALL \RPanasonic System Net\Rworks Co., Ltd. 
BE LIABLE TO ANY PARTY OR ANY PERSON, E\RXCEPT 
FOR REPLACEMENT OR REASONABLE\R MAINTENANCE 
OF THE PRODUCT, FOR THE CASES, INCLUDING BUT 
NOT LIMITED TO BELOW:
1
  ANY DAMAGE AND LOSS

, INCLUDING WITHOUT 
LIMITATION, DIRECT OR IND\RIRECT, SPECIAL, 
CONSEQUENTIAL OR EXEMPLAR\RY, ARISING OUT 
OF OR RELATING TO THE PRODUCT;
2
  PERSONAL INJURY OR ANY DAMA

GE CAUSED BY 
INAPPROPRIATE USE OR NEGLIGENT\R...

\f
Basic shooting ope\wrations
1	Set the subject br\>ightness to the ap\>propriate 
level.
2	Turn on the power of all the units\> and devices 
in the system.
3	Select the unit to \>be operated.
Even when using only\R one unit, it must still be select\Red 
from the wireless \Rremote control or co\Rntroller.
4	Select the shooting\> mode.
Select one of the f\Rour (FullAuto, Manual1, Manual\b and 
Manual3) preset shoot\Ring modes (scene fi\Rles), each of 
which corresponds to\R a set of circumstan\Rces in...

7
How to turn the power on an\f off
wwTurning the power on
When performing the operatio\>ns  
using the wireless \>remote control
1	Set all the power switches of the units a\>nd 
devices connected in\> the system to ON.
wp This unit does not\R have a po wer switch. 
When power is supplied to \Rit, the status dis\Rplay lamp 
will light up orange. 
The initial operation is then perf\Rormed, and after thi\Rs 
the unit is set to\R the standby mode.
2	Press one of the [\>CAM1] to [CAM4] buttons on 
the...

8
How to turn the power on an\f off
wwTurning the power off
When performing the operatio\>ns  
using the wireless \>remote control
1	Press one of the [\>CAM1] to [CAM4] buttons on 
the wireless remote \>control to select the uni\>t.
2	Press the [ON/STAND\bY] button on the 
wireless remote cont\>rol for 2
 seconds.
The unit’s power is turned off.
wp The unit’s status display lamp no

w lights up orange.
3	If a multiple number of units are \>going to be 
used, repeat steps 
1 and 2 as required.
4	Set all...

9
Selecting the units\w
Up to four units can be op\Rerated using one wir\Reless remote 
control.
Up to five units and devices can be operated using one 
controller.
Select the unit (or\R units) to be oper\Rated from the wire\Rless 
remote control or co\Rntroller.
Even when using only\R one unit, it must still be select\Red.
When performing the operatio\>ns  
using the wireless \>remote control
1	Press the [CAM1], [CAM2], [CAM3] or [CAM4] 
button.
The unit’s status display lamp blinks green when a 
signal...

10
Selecting the shoot\wing mo\fes \bscene fil\wes)
ww\fow to select the sho\>oting mode
When performing the operatio\>ns  
using the wireless \>remote control
1	Press the [CAM1], [CAM2], [CAM3] or [CAM4] 
button to select the\> unit.
2	Press the [MENU] b\>utton for 2 seconds.
The Top Menu is displayed.
      T o p   M e n u  
  C a m e r a         S c e n e :   F u l l A u t o  S \f s t e m  M a i n t e n a n c e
3	Press the [] or [] button to bring the\> cursor 
to “Camera”.
4	Press the [] button....