Panasonic Hd Integrated Camera Aw He50hn Operating Instructions

\b1
Preset memories
When the AW‑RP555 is connecte\>d:
Up to 10 settings \Rcan be registered a\Rnd called.
The [1] to [10] buttons of [PRESET] \Rcorrespond to the u\Rnit’s 
preset memories No.1 to No.10.
wq Registering the se\>ttings in the pres\>et memories
1	Display the picture to b\>e shot on the monit\>or.
Operate the [PAN/TILT] lever and [ZOOM] lever to 
determine the camera angle.
Adjust the focus, iris, gain and white b\Ralance if they 
need to be adjuste\Rd.
2	\fold down the [MEMORY] button.
The...

\b\b
White balance a\fjus\wtment
wwWhite balance adjus\>tment
In order for the white to be\R reproduced accurately, the ratio 
between the three primary colors (RGB) is ad\Rjusted. If the 
white balance has s\Rhifted out of adju\Rstment, not only w\Rill the 
white be reproduced\R poorly but the color tones \Rof the entire 
screen will also be\R degraded.
wp This adjustment must be performed when using th\>e 
unit f

or the first time or when the\> unit has not been\> 
used for a prolonged period.
wp It...

\b3
White balance a\fjus\wtment
5	Press the [] or [] button to bring the\> cursor 
to “AW\b Mode”.
6	Press the [] button.
“AWB Mode” starts blinking.
7	Press the [] or [] button to change the AW\b 
mode to be used to \>“AW\b
 A” or 
“AW\b
 \b”, and 
press the [

] button to enter the\> selection.
8	Press the [MENU] b\>utton for 2 seconds.
The menu display is exited.
9	Press the [SET] button for 2 seconds.
The auto white bal\Rance adjustment (AWB) is performed, 
and the white bala\Rnce setting is...

\b4
White balance a\fjus\wtment
When the AW‑RP50 is connected\>:
Refer to the Operating Instructions of the contr\Roller.
wp White balance may not be correctly s\Ret if the lighting\R 
of the object is to\Ro weak.
wpSince the unit has \Ra built‑in memory

, the set white 
balance will remain\R in the memory even if power is 
turned off. Therefore, it is not necessa\Rry to reset the 
white balance if th\Re color temperature of those obj\Rects 
remains unchanged. However, it must be reset if th\Re 
color...

\b5
Black level \bmaster pe\festal)\w a\fjustment
ww\black level (master pedestal\>) adjustment
The black level can be adjusted \Rwhen using a multiple 
number of cameras including the un\Rit. Ask your dealer to 
perform this adjustment.\R
(Use an oscilloscope\R or waveform monitor for the 
adjustment.)
Adjust the black level in accordance with\R the units and 
devices used.
The black level can be adjusted \Ronly when Manual1, 
Manual\b or Manual3 is selected as\R the shooting mode\R 
(scene file).
When...

\b\f
Black level \bmaster pe\festal)\w a\fjustment
When performing the operatio\>ns using the contr\>oller
When the AW‑RP655 is connecte\>d:
1	Press the [IRIS] b\>utton several times to turn \>off 
its lamp.
Set the iris to the manual ([MANU]) mode.
2	Turn the [FOCUS/IRIS\>] dial to stop down the 
lens iris.
3	Press the [R/\b GAIN\>/PED] button several 
times so that the “PEDESTAL TOTAL” item is 
displayed on the LCD panel.\>
4	Turn the jog dial (ma\>in) and adjust the\> black 
level to 5
 IRE (0.035...

\b7
Genlock a\fjustment \bAW‑HE50S only)
wwGenlock adjustment
The genlock adjustment is pe\Rrformed to achieve phase 
alignment by applying external synchronization\R (genlock) 
when a multiple number of cameras will be used or\R when 
the unit will be u\Rsed in combination \Rwith other devices.
This unit supports the BBS signal a\Rs the genlock signal.
Ask your dealer to perf\Rorm this adjustment.\R
(Use a dual
‑trace oscilloscope f

or the adjustment.\R)
(The genlock function is not a\Rvailable with...

\b8
Genlock a\fjustment \bAW‑HE50S only)
wqColor phase adjustme\>nt
The color phase adj\Rustment must be performed if the 
pictures are to be \Rswitched using a vid\Reo switcher or other 
device when the video\R output signals ha\Rve been set as 
composite signals.
It need not be per\Rformed when the video\R output signals 
have been set as compo\Rnent signals.
The camera’s color phase is al\Rigned with the pro\Rgram output 
(split color bar ou\Rtput) signals of a\R color special effect device 
or other...

\b9
Genlock a\fjustment \bAW‑HE50S only)
When performing the operatio\>ns using the contr\>oller
These operations can be performed using the camer\Ra 
menus by following the operation steps in “Basic operations” 
(pages
 30 to 37).
To s

witch between “BAR” (color bar display) and “CAM” 
(camera pictures), press \Rthe [MODE] or [BAR/\RCAM] button. 

30
Basic operations
Menus are displayed on the monitor \Rwhen the unit’s settings 
are to be selected.\R
The monitor is conn\Rected to the video \Rsignal output 
connector.
The basic menu operations involve displaying sub‑menus 
from the Top Menu items, and selecting set\Rtings on the 
sub‑menus.
Some sub‑menus have menu items for performing more 
detailed settings.
The menu operations are conducted\R using the wireles\Rs 
remote control.
If a controller is \Rconnected, they can also be conduct\Red...