Panasonic Hd Integrated Camera Aw He50hn Operating Instructions

11
Selecting the shoot\wing mo\fes \bscene fil\wes)
When performing the operatio\>ns using the contr\>oller
When the AW‑RP655 is connecte\>d:
1	Press the [1], [2], [3], [4] or [5] button of 
[CONTROL/PREVIEW MONITOR OUT SEL].
2	Press the [MENU] b\>utton.
The display on the LCD panel\R of the AW‑RP\f55 
switches to the menu mode.
3	Turn the jog dial (ma\>in).
Display “CAMERA SETTING” on the LCD panel.\R
4	Press the [OK] button.
Display “OPEN CAMERA MENU? \R OK Key” on the
LCD panel.
5	Press the [OK]...

1\b
Shooting
When performing the operatio\>ns  
using the wireless \>remote control
wq Changing the camera\>’s direction
 Moving the camera toward the left or right\> (panning):
   Press the [] or [

] button.
 Moving the camera up \>or down (tilting):
   Press the [] or [

] button.
 Moving the camera dia\>gonall

y:
     Press the [] or [

] button and [] or [] button at 
the same time.
 Returning the camer\>a to the reference position:
   Press the [HOME] b\Rutton for \b seconds.
wq Using the...

13
What to \fo when enc\wountering problems in the basic s\whooting operations\w
If the trouble is not resolved by taking the action\R suggested 
below, refer to “Troubleshooting” (page
 3\f in the ).\R
When performing the operatio\>ns  
using the wireless \>remote control
The unit does not \>move.
wp Press the [CAM1], \R[CAM\b], [CAM3] or [\RCAM4] button to 
select the unit whi\Rch is to be operated.
 
If only one unit i\Rs being used, it i\Rs normally selected usin\Rg 
the [CAM1] button.
wp If the...

14
More a\fvance\f operations
Manual shooting (see p\>ages 15 to 18)
wpManual adjustment of \Rfocus
wpManual adjustment of \Riris
wpManual adjustment of \Rshutter speed
wpManual adjustment of \Rgain
Preset memories (se\>e pages 19 to 21)
wpUp to 100 settings for the camer a direction (pannin\Rg and 
tilting), zoom, focus, iris, gain up and whit\Re balance can 
be registered in t\Rhe preset memories, and called.
wp The number of settings \Rthat can be registe\Rred and 
called depends on t\Rhe type of...

15
Manual shooting
wwManually adjusting the focus
The lens focus can be adjusted\R manually.
When performing the operatio\>ns  
using the wireless \>remote control
1	Press the [M/FOCUS]\> button to switch the 
focus to manual adjustment.
2	Press the [F] or [\>N] button of [FOCUS], and 
adjust the focus.
When the [F] button is pressed, \Rthe focus moves further 
away (far); conversely, when the [N] button is pressed, \Rit 
moves nearer (near).
The speed of focusing and other a\Rdjustments can 
be switched...

1\f
Manual shooting
wwManually adjusting the ir\>is
The lens iris can be adjusted \Rmanually.
When performing the operatio\>ns  
using the wireless \>remote control
1	Press the [M/IRIS]\> button to switch the iris to 
manual adjustment.
2	Adjust the iris us\>ing the [IRIS +] or [IRIS –] 
button.
Press the [IRIS +] button to adjust th\Re lens iris in the 
opening direction; conv ersely, press the [IRIS
 –] button 
to adjust the lens\R ir

is in the closing d\Rirection.
3	If necessary, press the [A/IRIS\>]...

17
Manual shooting
wwManually adjusting the sh\>utter speed
The shutter speed \Rcan be set using tw\Ro methods. One is 
a method that speci\Rfies the time (whe\Rre a time such as 
1/\b50 sec. is designated), a\Rnd the other is a \Rmethod that 
specifies the frequ\Rency (where synchro \Rscan, \f0.\b4
 Hz, etc. 
is designated).
When shooting a 

TV screen or PC mon\Ritor screen, the 
horizontal noise generated when the scree\Rn is shot can 
be minimized by adjusting the fr\Requency to the scree\Rn...

18
Manual shooting
wwManually adjusting the ga\>in
There are two ways to adjust the g\Rain. One way involves 
using the buttons on the wire\Rless remote control\R or 
controller; the other way involves using the Camer\Ra menu or 
Web setting.
The gain can be adj\Rusted more precisel\Ry using the Camera 
menu or Web setting.
For further details, refer to the [Gain] i\Rtem on page
 40 and 
page
 59.
wp When adjusting the\R gain, the light q\Ruantity may 
change suddenly (cau\Rsing the image out\Rput to be...

19
Preset memories
This unit enables up to 100 settings for the camera direction 
(panning and tilti\Rng), zoom, focus , iris, gain and white 
balance to be regis\Rtered in its prese\Rt memories, and called.
However, the number of settings \Rthat can be registe\Rred and 
called depends on t\Rhe type of wireles\Rs remote control or\R 
controller that is \Rused for operation.
wp The operating mode (manual or auto settin\Rg) is not 
registered f

or the focus and iris settings. 
The current focus and iris...

\b0
Preset memories
When performing the operatio\>ns using the contr\>oller
When the AW‑RP655 is connecte\>d:
Up to 50
 settings can be reg\Ristered and called.\R
The [1] to [50] buttons of [TRA

CING/PRESET MEMORY] 
correspond to the u\Rnit’s preset memories No.1 to No.50.
wq Registering the se\>ttings in the pres\>et memories
1	Set to the preset \>memory mode.
Press the [TR/PSET]\R button to turn off its lamp.
2	Set to the memory recording mode.
Press the [M.LOCK]\R button to turn off its lamp.
3...