Panasonic Hd Convertible Camera Aw He870n Operating Instructions

- 31 -
Connection of the Indoor Pan-tilt Head AW-PH400 (continued)
When an SDI card (AW-HHD870) has been installed
  Use a coaxial cable to connect the SDI OUT connector on the SDI card and the SDI IN conne\
ctor on the AW-PH400.
  Use a coaxial cable to connect the SDI connector on the AW-PH400 to the SDI input connector on the color monitor.
  HD (1080i or 720p) analog component signals cannot be output from the \
AW-PH400.
Note
 AW-IF400 Switch settings (when the AW-RP555/AW-RP655 is used)
SW1...

- 32 -
System configuration (Connections)
Connection of the Indoor Pan-tilt Head AW-PH400 (continued)
*: The HD component signal cannot be output. 
Motorized zoom lens
Camera cable 
supplied with 
AW-PH400
Coaxial cable
(to SDI 
connector)
Indoor Pan-tilt 
Head
AW-PH400 HD/SD-SDI
Composite 
signal
Monitor
Protocol Converter
AW-IF400
Pan/Tilt Control 
Panel
AW-RP400
Remote 
Operation Panel
AW-CB400
Multi-Function 
Controller
AW-RP655
Multi Hybrid 
Control Panel
AW-RP555
Pan-tilt head/camera control...

- 33 -
System configuration (Connections)
Connection of the Indoor Pan-tilt Head AW-PH405
  Turn off the power of all the equipment before proceeding with the connections.
  Connect the AC power cable provided with the AW-PH405 to the AW-PH405 indoor pan-tilt head.
  Use 10BASE-T straight cables to connect the RP connectors on the pan-tilt heads with the CONTROL OUT TO PAN/TILT 
HEAD (1 to 5) connectors on the AW-RP655 multi-function controller and AW-RP555 multi hybrid control panel. 
The maximum...

- 34 -
Connection of the Indoor Pan-tilt Head AW-PH405 (continued)
When an SDI card (AW-HHD870) has been installed
  Use a coaxial cable to connect the SDI OUT connector on the SDI card and the SDI IN conne\
ctor on the AW-PH405.
  Use a coaxial cable to connect the SDI connector on the AW-PH405 to the SDI input connector on the color monitor.
   When transmitting HD (1080i or 720p) analog component signals, the switch inside the AW-PH405 main unit must be set 
to the HD position (the operation of...

- 35 -
System configuration (Connections)
Connection of the Indoor Pan-tilt Head AW-PH405 (continued)
Motorized zoom lens
Coaxial cable
(to SDI connector)
Camera cable 
supplied with 
AW-PH405
Indoor 
Pan-tilt Head
AW-PH405HD/SD-SDI
Coaxial cable
Monitor
AC power cable 
supplied with 
AW-PH405
Protocol 
Converter
AW-IF400
Pan/Tilt 
Control 
Panel
AW-RP400
Remote 
Operation Panel
AW-CB400 Multi-Function Controller
AW-RP655
Multi Hybrid 
Control Panel
AW-RP555Pan-tilt head/camera 
control signals
10BASE-T...

- 36 -
System configuration (Connections)
Connection of the Outdoor Pan-tilt Head AW-PH650
  Turn off the power of all the equipment before proceeding with the connections.
  Connect the AC adapter provided with the AW-PH650 to the AW-PH650 outdoor pan-tilt head.
  Use 10BASE-T straight cables to connect the RP connectors on the pan-tilt heads with the CONTROL OUT TO PAN/TILT 
HEAD (1 to 5) connectors on the AW-RP655 multi-function controller and AW-RP555 multi hybrid control panel. 
The maximum...

- 37 -
Connection of the Outdoor Pan-tilt Head AW-PH650 (continued)
When an SDI card (AW-HHD870) has been installed
   Use a coaxial cable to connect the SDI OUT connector on the SDI card and the SDI IN conne\
ctor on the AW-PH650 main 
unit.
   Use a coaxial cable to connect the coaxial connector (SDI OUT) on the AW-PH650 to the SDI input connector on the color 
monitor.
   When transmitting HD (1080i or 720p) analog component signals, set SW2 and SW3 on the COMP circuit board to the 
HD position....

- 38 -
System configuration (Connections)
Connection of the Outdoor Pan-tilt Head AW-PH650 (continued)
G/L input
To be locally purchased
Pr
Outdoor 
Pan-tilt 
Head
AW-PH650HD/SD-SDI
HD/SD 
component 
signal
Monitor
D-SUB
15 pin
RJ-45 relay 
adapter
Protocol 
Converter
AW-IF400
Pan/Tilt 
Control 
Panel
AW-RP400
Remote 
Operation 
Panel
AW-CB400 Multi-Function Controller
AW-RP655
Multi Hybrid 
Control Panel
AW-RP555Pan-tilt head/camera 
control signals
10BASE-T straight cable
AC Adapter
AW-PS510AMonitor...

- 39 -
How to operate the system
Control exercised from the Remote Operation Panel AW-CB400
When using the AW-CB400, its switches and dials function as shown in the figure below.
For switching the GAIN/PED display and controller 
setting menu display.
For details on the camera’s functions, open the camera’s 
menu and select the settings.
These are the OPTION switches, and each switch makes 
it possible to operate one of the items listed below.
(The items are set on the controller setting menu.)
A: MENU...

- 40 -
Control exercised from the Remote Operation Panel AW-CB400 (continued)
 *1 :  SCENE FILE, CAM/BAR, and DETAIL OFF/LOW/HIGH of each SCENE, as well as the GAINUP, AGC MAX GAIN, W/B MODE, R/B 
GAIN and T/R/B PED statuses are synchronized.
Statuses are also acquired from the camera when the SCENE is switched or when the CAMERA MENU is turned OFF (including 
switching from MENU ENABLE to DISABLE).
 *2 :   When PRESET 3200K or PRESET 5600K is selected in the camera menu, everything turns off when the...