Panasonic Hd Convertible Camera Aw He870n Operating Instructions
Here you can view all the pages of manual Panasonic Hd Convertible Camera Aw He870n Operating Instructions. The Panasonic manuals for Camera are available online for free. You can easily download all the documents as PDF.
Page 61
- 61 - 6. Upon completion of the settings, keep the MENU switch depressed for 3 seconds or more to close the main menu screen. The camera will now operate according to the new settings. MENU switch ENTER/AWB switch UP/ABB switch DOWN/BAR switch Main menu screen Main menu of Halogen, Fluorescent, Outdoor Mode Halogen Mode Set Brightness Set Color Set Sharpness(DTL) Set G/L Set Other Set 1 Other Set 2 Initialize DataDisplays the use mode Main menu of User Mode User Mode Set...
Page 62
- 62 - Menu item setting/changing (Halogen, Fluorescent, Outdoor Mode) Sub menu (Halogen, Fluorescent, Outdoor Mode) Brightness Set Picture Level 0 Light PEAK/AVG 0 Light Area Top Cut Shutter Mode Step Step/Synchro Off Gain 0dB AGC Max Gain --- Pedestal 0 Return–––––––––––––––––––––––––––––––––––––––––––––––––––––––––––– Brightness Set Display Color Set Chroma Level 0 Flesh Tone...
Page 63
![Page 63
- 63 -
Description of the setting screen
Brightness Set
Video level adjustment
[Picture Level: –50 to +50]
Convergence level of AUTO IRIS, AUTO GAIN UP and
AUTO ND (ELC) can be adjusted.
Detecting ratio adjustment
[Light PEAK/AVG: P50 to A50]
The ratio of AUTO IRIS, AUTO GAIN UP and AUTO ND
(ELC) detected peak (P) to average (A) can be adjusted
within a predetermined range.
Photometric measurement method setting
[Light Area: All, Center, Top Cut, BTM Cut,
R/L Cut]
A photometric...](http://img.usermanuals.tech/thumb/58/69569/w300_aw-he870n_en_om_d-62.png "Page 63
- 63 -
Description of the setting screen
Brightness Set
Video level adjustment
[Picture Level: –50 to +50]
Convergence level of AUTO IRIS, AUTO GAIN UP and
AUTO ND (ELC) can be adjusted.
Detecting ratio adjustment
[Light PEAK/AVG: P50 to A50]
The ratio of AUTO IRIS, AUTO GAIN UP and AUTO ND
(ELC) detected peak (P) to average (A) can be adjusted
within a predetermined range.
Photometric measurement method setting
[Light Area: All, Center, Top Cut, BTM Cut,
R/L Cut]
A photometric...")
- 63 - Description of the setting screen Brightness Set Video level adjustment [Picture Level: –50 to +50] Convergence level of AUTO IRIS, AUTO GAIN UP and AUTO ND (ELC) can be adjusted. Detecting ratio adjustment [Light PEAK/AVG: P50 to A50] The ratio of AUTO IRIS, AUTO GAIN UP and AUTO ND (ELC) detected peak (P) to average (A) can be adjusted within a predetermined range. Photometric measurement method setting [Light Area: All, Center, Top Cut, BTM Cut, R/L Cut] A photometric...
Page 64
![Page 64
- 64 -
Electronic shutter step/synchro scan setting
[Step/Synchro: Off, 1/100 to 1/10000 (Step),
61.19 Hz to 1466 Hz (Synchro Scan)]
This setting is possible only when “Step” or “S/Scan” is
selected in electronic shutter mode setting.
When “Step” has been selected as the electronic shutter
mode setting:
Off: Electronic shutter is turned off.
1/100, 1/250, 1/500, 1/1000, 1/2000, 1/4000, 1/10000:
Electronic shutter operates at one of these
speeds as selected.
When “S/Scan” has been...](http://img.usermanuals.tech/thumb/58/69569/w300_aw-he870n_en_om_d-63.png "Page 64
- 64 -
Electronic shutter step/synchro scan setting
[Step/Synchro: Off, 1/100 to 1/10000 (Step),
61.19 Hz to 1466 Hz (Synchro Scan)]
This setting is possible only when “Step” or “S/Scan” is
selected in electronic shutter mode setting.
When “Step” has been selected as the electronic shutter
mode setting:
Off: Electronic shutter is turned off.
1/100, 1/250, 1/500, 1/1000, 1/2000, 1/4000, 1/10000:
Electronic shutter operates at one of these
speeds as selected.
When “S/Scan” has been...")
- 64 -
Electronic shutter step/synchro scan setting
[Step/Synchro: Off, 1/100 to 1/10000 (Step),
61.19 Hz to 1466 Hz (Synchro Scan)]
This setting is possible only when “Step” or “S/Scan” is
selected in electronic shutter mode setting.
When “Step” has been selected as the electronic shutter
mode setting:
Off: Electronic shutter is turned off.
1/100, 1/250, 1/500, 1/1000, 1/2000, 1/4000, 1/10000:
Electronic shutter operates at one of these
speeds as selected.
When “S/Scan” has been...
Page 65
![Page 65
- 65 -
Color Set
Chroma level adjustment
[Chroma Level: –3 to +3]
Chroma level can be decreased or increased to any of
three levels each.
The RGB signal cannot be adjusted.
Skin color adjustment [Flesh Tone: –3 to +3]
Skin color can be decreased or increased to any of three
levels each.
White balance setting
[White Bal: ATW, AWB A, AWB B, 3200K, 5600K]
AT W : The white balance is automatically adjusted to
the optimum position.
The white balance is tracked across an
approximate color...](http://img.usermanuals.tech/thumb/58/69569/w300_aw-he870n_en_om_d-64.png "Page 65
- 65 -
Color Set
Chroma level adjustment
[Chroma Level: –3 to +3]
Chroma level can be decreased or increased to any of
three levels each.
The RGB signal cannot be adjusted.
Skin color adjustment [Flesh Tone: –3 to +3]
Skin color can be decreased or increased to any of three
levels each.
White balance setting
[White Bal: ATW, AWB A, AWB B, 3200K, 5600K]
AT W : The white balance is automatically adjusted to
the optimum position.
The white balance is tracked across an
approximate color...")
- 65 - Color Set Chroma level adjustment [Chroma Level: –3 to +3] Chroma level can be decreased or increased to any of three levels each. The RGB signal cannot be adjusted. Skin color adjustment [Flesh Tone: –3 to +3] Skin color can be decreased or increased to any of three levels each. White balance setting [White Bal: ATW, AWB A, AWB B, 3200K, 5600K] AT W : The white balance is automatically adjusted to the optimum position. The white balance is tracked across an approximate color...
Page 66
![Page 66
- 66 -
Sharpness (DTL) Set
Detail select setting
[DTL Select: Sharpness, Super DTL]
If contour correction is not sufficient at the “Sharpness”
position when detail level setting is set to “Low” or “High”,
select the “Super DTL” position.
Neither “Sharpness” nor “Super DTL” is valid for
contour correction if detail level setting is in the
“Off ” position.
Note
Detail level setting [Level: Off, Low, High]
Detail level can be adjusted when detail select setting is
at “Sharpness”. Super DTL...](http://img.usermanuals.tech/thumb/58/69569/w300_aw-he870n_en_om_d-65.png "Page 66
- 66 -
Sharpness (DTL) Set
Detail select setting
[DTL Select: Sharpness, Super DTL]
If contour correction is not sufficient at the “Sharpness”
position when detail level setting is set to “Low” or “High”,
select the “Super DTL” position.
Neither “Sharpness” nor “Super DTL” is valid for
contour correction if detail level setting is in the
“Off ” position.
Note
Detail level setting [Level: Off, Low, High]
Detail level can be adjusted when detail select setting is
at “Sharpness”. Super DTL...")
- 66 - Sharpness (DTL) Set Detail select setting [DTL Select: Sharpness, Super DTL] If contour correction is not sufficient at the “Sharpness” position when detail level setting is set to “Low” or “High”, select the “Super DTL” position. Neither “Sharpness” nor “Super DTL” is valid for contour correction if detail level setting is in the “Off ” position. Note Detail level setting [Level: Off, Low, High] Detail level can be adjusted when detail select setting is at “Sharpness”. Super DTL...
Page 67
![Page 67
- 67 -
Menu item setting/changing (Halogen, Fluorescent, Outdoor Mode)
G/L Set
Horizontal phase adjustment
[H Phase: –206 to +49]
Horizontal phase can be adjusted when a genlock signal
is supplied.
Subcarrier phase coarse adjustment
[SC Coarse: 0deg, 45deg, 90deg, 135deg,
180deg, 225deg, 270deg, 315deg]
Coarse adjustment of subcarrier phase can be made
when a genlock signal is supplied.
Valid for the composite and Y/C signals of the SD format.
Subcarrier phase fine adjustment
[SC Fine:...](http://img.usermanuals.tech/thumb/58/69569/w300_aw-he870n_en_om_d-66.png "Page 67
- 67 -
Menu item setting/changing (Halogen, Fluorescent, Outdoor Mode)
G/L Set
Horizontal phase adjustment
[H Phase: –206 to +49]
Horizontal phase can be adjusted when a genlock signal
is supplied.
Subcarrier phase coarse adjustment
[SC Coarse: 0deg, 45deg, 90deg, 135deg,
180deg, 225deg, 270deg, 315deg]
Coarse adjustment of subcarrier phase can be made
when a genlock signal is supplied.
Valid for the composite and Y/C signals of the SD format.
Subcarrier phase fine adjustment
[SC Fine:...")
- 67 - Menu item setting/changing (Halogen, Fluorescent, Outdoor Mode) G/L Set Horizontal phase adjustment [H Phase: –206 to +49] Horizontal phase can be adjusted when a genlock signal is supplied. Subcarrier phase coarse adjustment [SC Coarse: 0deg, 45deg, 90deg, 135deg, 180deg, 225deg, 270deg, 315deg] Coarse adjustment of subcarrier phase can be made when a genlock signal is supplied. Valid for the composite and Y/C signals of the SD format. Subcarrier phase fine adjustment [SC Fine:...
Page 68
![Page 68
- 68 -
Down-conversion mode selection
[Downconv. Mode: Squeeze, Sidecut]
Squeeze or Sidecut can be selected as the
down-conversion mode for the SD (480i) format.
Component output setting
[Component: RGB, Y/Pb/Pr, Y/C]
This enables RGB, Y/Pb/Pr or Y/C to be selected as
the component signals which are to be output from the
I/F REMOTE connector.
Y/C cannot be selected when “1080i” or “720p” has been
selected as the “Video output format (Format)” setting.
If “1080i” or “720p” has been selected...](http://img.usermanuals.tech/thumb/58/69569/w300_aw-he870n_en_om_d-67.png "Page 68
- 68 -
Down-conversion mode selection
[Downconv. Mode: Squeeze, Sidecut]
Squeeze or Sidecut can be selected as the
down-conversion mode for the SD (480i) format.
Component output setting
[Component: RGB, Y/Pb/Pr, Y/C]
This enables RGB, Y/Pb/Pr or Y/C to be selected as
the component signals which are to be output from the
I/F REMOTE connector.
Y/C cannot be selected when “1080i” or “720p” has been
selected as the “Video output format (Format)” setting.
If “1080i” or “720p” has been selected...")
- 68 - Down-conversion mode selection [Downconv. Mode: Squeeze, Sidecut] Squeeze or Sidecut can be selected as the down-conversion mode for the SD (480i) format. Component output setting [Component: RGB, Y/Pb/Pr, Y/C] This enables RGB, Y/Pb/Pr or Y/C to be selected as the component signals which are to be output from the I/F REMOTE connector. Y/C cannot be selected when “1080i” or “720p” has been selected as the “Video output format (Format)” setting. If “1080i” or “720p” has been selected...
Page 69
![Page 69
- 69 -
Character output selection
[ Character Mix
Component: Off, On / Composite: Off, On /
Option: Off, On]
This is used to select how the camera menu, status and
other characters are to be output (Off or On).
Component: How the characters to the component
signals (RGB, Y/Pb/Pr) are output is
selected.
Composite: Character output method for composite
signals and Y/C signals is selected.
Option: How the characters to the optional card are
output is selected.
When the menu is started...](http://img.usermanuals.tech/thumb/58/69569/w300_aw-he870n_en_om_d-68.png "Page 69
- 69 -
Character output selection
[ Character Mix
Component: Off, On / Composite: Off, On /
Option: Off, On]
This is used to select how the camera menu, status and
other characters are to be output (Off or On).
Component: How the characters to the component
signals (RGB, Y/Pb/Pr) are output is
selected.
Composite: Character output method for composite
signals and Y/C signals is selected.
Option: How the characters to the optional card are
output is selected.
When the menu is started...")
- 69 - Character output selection [ Character Mix Component: Off, On / Composite: Off, On / Option: Off, On] This is used to select how the camera menu, status and other characters are to be output (Off or On). Component: How the characters to the component signals (RGB, Y/Pb/Pr) are output is selected. Composite: Character output method for composite signals and Y/C signals is selected. Option: How the characters to the optional card are output is selected. When the menu is started...
Page 70
- 70 - Menu item setting/changing (User Mode) Sub menu (User Mode) HD Detail Set 1/2 Detail High H Detail Level H 30 V Detail Level H 23 H Detail Level L 18 V Detail Level L 15 Detail Band 4 Noise Suppress 5 Level Dependent 10% Dark Detail 0 Return––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––– HD Detail Set Display HD Detail Set 2/2 Chroma Detail 0 Clean DNR...