Panasonic Hd Convertible Camera Aw He870n Operating Instructions

- 21 -
  Example where the camera is mounted on a ceiling or wall
Mounting spacer 
(supplied) Mounting screw (M4)
Drop-prevention wire
(Ceiling)
Mounting screws
(Inch screws: 1/4-20UNC)Camera mounting 
bracket
Flat washers
Spring washers
Hitch the end of the wire 
onto the anchor bolt by 
tightening the nut or 
screw or by using a hook.
Notes
   When attaching one end of the drop-prevention wire to the 
surface of a ceiling or wall, ensure that it is strong enough to bear 
at least five times the total...

- 22 -
  Example of mounting the camera onto a bracket 
or tripod made by another manufacturer
Mounting spacer (supplied)
Camera mounting screw holes Mounting screw (M4)
Drop-prevention wire
Mounting screws
(Inch screws: 1/4-20UNC) Bracket or tripod made by 
another manufacturer
Flat washers
Spring washers
Hitch the end of the wire 
onto the anchor bolt by 
tightening the nut or screw 
or by using a hook.
Notes
   Ensure that the installation location is strong enough to bear at 
least five times the...

- 23 -
3.  When mounting the camera onto a pan-tilt head 
(AW-PH400), do not use the anchoring rubber piece 
supplied with the pan-tilt head.
If this rubber piece is used, the camera’s ventilation 
holes will be blocked, causing the temperature inside the 
camera to rise and possibly resulting in a malfunction.
Do not use the anchoring 
rubber piece when 
mounting the AW-HE870 
camera.
Indoor Pan/tilt Head AW-PH400
  For the specifications of the camera mounting screw 
holes, refer to “Major operating...

- 24 -
System configuration (Connections)
Connection of device with a composite/component input connector
  Connection to any device which has a composite signal input connector, such as a monitor or a VTR, must be made through 
the VIDEO OUT connector.
   Use the AW-CA50T8 camera control cable, which is available as an optional accessory, to connect the I/F REMOTE 
connector on the unit with the device equipped with HD/SD component signal input connectors.
   Composite signals (from the VIDEO OUT...

- 25 -
System configuration (Connections)
Connection of a remote operation panel
When an SDI card (AW-HHD870) has been installed
  First, turn off the power of all the equipment before proceeding with the connections.
   Use the AW-PS510A for the AC adapter of the unit.
Connect the DC 12 V OUT socket on the AW-PS510A to the DC 12 V IN socket on the unit using the DC cable provided with 
the AW-HE870.
   Connect the CONTROL OUT TO CAMERA connectors [1] to [5] on the ROP with the I/F REMOTE connectors...

- 26 -
System configuration (Connections)
Connection with multiple cameras (Supplying the external synchronizing signals)
  Supply a synchronizing signal (BB) to the G/L input connectors of each\
 camera.
  Do not switch off the camera used for supplying the external synchronizing signals.
  Genlock adjustment is needed when supplying the external synchronizing signals. (page 57)
CameraVIDEO OUT
G/L IN
VIDEO OUT
Camera for external sync
(or special effect generator) External sync 
signal (BB)
INPUT...

- 27 -
System configuration (Connections)
Connection of the Indoor Pan-tilt Head AW-PH360
  Turn off the power of all the equipment before proceeding with the connections.
  Connect the AC adapter (AW-PS300A) to the AW-PH360 indoor pan-tilt head.
  Use 10BASE-T straight cables to connect the RP connectors on the pan-tilt heads with the CONTROL OUT TO PAN/TILT 
HEAD (1 to 5) connectors on the AW-RP655 multi-function controller and AW-RP555 multi hybrid control panel. 
The maximum extension distance is...

- 28 -
Connection of the Indoor Pan-tilt Head AW-PH360 (continued)
When an SDI card (AW-HHD870) has been installed
  Use a coaxial cable to connect the SDI OUT connector on the SDI card and the SDI IN conne\
ctor on the AW-PH360.
  Use a coaxial cable to connect the Pr/SDI OUT connector on the AW-PH360 to the SDI input connector on the color monitor.
  HD (1080i or 720p) analog component signals cannot be output from the \
AW-PH360.
   Refer to the operating instructions of the AW-PH360 for details...

- 29 -
System configuration (Connections)
Connection of the Indoor Pan-tilt Head AW-PH360 (continued)
Motorized zoom lensCoaxial 
cable
(to SDI 
connector)
Camera 
cable
(supplied)
Indoor 
Pan-tilt 
Head
AW-PH360 HD/SD-SDI
Composite 
signal
MonitorAC Adapter
AW-PS300A
DC cable (UL Type SPT-2
216 AWG or UL Type
NISPT-2 216 AWG, to be 
locally purchased)
Pan/Tilt 
Control 
Panel
AW-RP400
Remote 
Operation 
Panel
AW-CB400 Multi-Function Controller
AW-RP655
Multi Hybrid 
Control Panel
AW-RP555Pan-tilt...

- 30 -
System configuration (Connections)
Connection of the Indoor Pan-tilt Head AW-PH400
  Turn off the power of all the equipment before proceeding with the connections.
  Connect the AC power cable provided with the AW-PH400 to the AW-PH400 indoor pan-tilt head.
  Use 10BASE-T straight cables to connect the CONTROLLER connectors on the protocol converter AW-IF400 with the 
CONTROL OUT TO PAN/TILT HEAD (1 to 5) connectors on the AW-RP655 multi-function controller and AW-RP555 multi 
hybrid control...