Panasonic Hc V270 Owners Manual

							- 51 -
Manual shutter speed/iris adjustment
Shutter Speed:
Adjust it when recording fast-moving subjects.
Iris:
Adjust it when the screen is too bright or too dark.
≥Switch to Manual Mode. ( l49)
1Touch [SHTR] or [IRIS].
2Touch  /  to adjust settings.≥Touch [SHTR]/[IRIS] to end the adjustment.
: Shutter speed:
1/60 to 1/8000
≥ If [AUTO SLOW SHTR] is set to [ON], the shutter speed will be s et between 1/30 and 1/8000.
≥ The shutter speed closer to 1/8000 is faster.
≥ The shutter speed will be set between 1/2 and 1/2000 in Still P icture Recording Mode.
: Iris/Gain value:
CLOSE 
!# (F16 to F2.0) !# OPEN !# (0dB to 18dB)
≥ Value closer to CLOSE darken the image.
≥ Value closer to 18dB brighten the image.
≥ When the iris value is adjusted to brighter than OPEN, it chang es to the gain value.
≥ To return to auto setting, change the Recording Mode to the Int elligent Auto Mode. (l40)
≥When setting both the shutter speed and the iris/gain value, set the shutter speed and then set 
the iris/gain value.
Manual shutter speed adjustment
≥ When the shutter speed is set lower than 1/15 in the Still Pict ure Recording Mode, using a tripod 
is recommended. The shutter speed will be set to 1/30 when the  unit is turned on again.
≥ You may see a band of light around an object that is shining ve ry bright, or highly reflective.
≥ During normal playback, image movement may not look smooth.
≥ If you record an extremely bright object or record under indoor  lighting, color and screen 
brightness may change or a horizontal line may appear on the sc reen. In this case, record in the 
Intelligent Auto Mode or set the shutter speed to 1/60 in areas where the power supply frequency 
is 60 Hz, or 1/100 in areas of 50 Hz.
≥ Brightness of the image displayed on the LCD monitor may be dif ferent from brightness of the 
image actually recorded during the Still Picture Recording Mode . Confirm the image on the 
playback screen after recording.
Manual iris/gain adjustment
≥ If the gain value is increased, the noise on the screen increases.
≥ Depending on the zoom magnification, there are iris values that  are not displayed.
SHTR
IRIS 
						

							- 52 -
Manual Focus adjustment
If auto focusing is difficult due to the conditions, then use Manual Focus.
≥ Switch to Manual Mode. ( l49)
1(When MF assist function is used)Select the menu.
≥Touch   to display the Manual icon.
2Touch [FOCUS].
3Touch [MF] to change to Manual Focus.≥MF appears on the screen.
4Adjust the focus by touching  / .
The in-focus area is displayed in blue. The normal screen 
returns approximately 2 seconds after you finish bringing 
the subject into focus.
≥Touch [FOCUS] to end the adjustment.
≥ When [MF ASSIST] is [OFF], the blue area is not 
displayed.
≥ To restore Auto Focus, touch [AF] in Step 3 or change the Recor ding Mode to the Intelligent Auto 
Mode. ( l40)
≥The blue display does not appear on the images actually recorde d.
: [RECORD SETUP] 
# [MF ASSIST] # [ON]
:To focus on a close subject
:To focus on a faraway subject
MENU
MNLFOCUSWBSHTRIRIS

APart displayed in blue
MFMF
MF
MF 
						

							- 53 -
You can record using convenient functions just by the easy operation of touching the screen.
1Touch   (left side)/  (right side) of   on the Touch Menu to displ ay 
Touch Function icons. ( l18)
2Touch the Touch Function icon.
(e.g. AF/AE tracking)
≥ To cancel, touch the Touch Fu nction icon again. (Optical 
Image Stabilizer Lock is canceled by releasing the finger 
touching  .)
Touch function icons
*1 In Motion Picture Recording Mode only
*2 In Still Picture Recording Mode only
Advanced (Recording)
Recording with the Touch Function
Image Stabilizer Function
AF/AE tracking
Optical Image Stabilizer Lock
*1
Touch Shutter*2 
						

							- 54 -
Use the Image Stabilizer to reduce the effects of shake during recording.
This unit is equipped with Hybrid Optical Image Stabilizer.
Hybrid Optical Image Stabilizer is a hybrid of Optical and Electrical Image Stabilizer.
Touch   to switch the Image Stabilizer on/off.≥ The icon at position  A is switched.
∫Changing Image Stabilizer Mode
(Motion Picture Recording Mode)
Setting [HYBRID O.I.S.]
When set to [ON], you can further improve image stabilization f or recording while walking, or 
holding the unit and recording a distant subject with zoom.
≥ This function’s default setting is [ON].
Setting [O.I.S.]
Image Stabilizer Function

(Motion Picture Recording Mode)
( / ), ( / )  #  (setting canceled)
≥ When [O.I.S.] is set to [Standard],   is displayed; when [O.I.S. ] is set to [Active],   is 
displayed.
≥ When [HYBRID O.I.S.] is set to [ON] and [O.I.S.] is set to [Active],   is displayed;
When [HYBRID O.I.S.] is set to [ON] and [O.I.S.] is set to [Standard],   is displayed.
≥ When recording with a tripod in Motion Picture Recording Mode,  we recommend that you set 
the Image Stabilizer   (off).
(Still Picture Recording Mode) /  #    (setting canceled)
≥ When [O.I.S.] is [MODE1],   is dis played. When [O.I.S.] is [MODE2],   is displayed.
: [RECORD SETUP]  # [HYBRID O.I.S.]  # [ON] or [OFF]
: [RECORD SETUP]  # [O.I.S.]  # [Standard] or [Active]
[Standard]:Compensates for blurring caused by hand-shake
[Active]:Compensates for even greater blurring caused by hand-shake.
MENU
MENU 
						

							- 55 -
(Still Picture Recording Mode)
It is possible to set the focus and exposure to the subject specified on the touch screen.
The focus and exposure will keep following the subject automati cally even if it moves.
1To u c h   .≥An icon is displayed  B.2Touch the object and lock the target.≥When you touch the head of the object, the target frame 
on the head gets locked and tracking starts.
≥ Touch the object to be changed again when you want to 
change the target.
≥ When the Intelligent Auto Mode or Intelligent Auto Plus 
Mode is selected, the setting becomes  /  
(Normal) and touched object is tracked. Selection 
becomes  /  (Portrait) when target frame is locked 
on a face. (It may turn to  /  (Normal) even if the 
target is locked on the face when a spotlight is shining or 
with a dark scene.)
3 Start recording.
∫About target frame
≥When target lock fails, the target frame blinks in red and then  disappears. Touch a characteristic 
part (color etc.) on the object to lock onto it again.
≥ When the   button is pressed halfway in Still Picture Recording  Mode, the focus is set to the 
object that is locked. The target frame turns green when it foc uses, and the target cannot be 
changed. : [RECORD SETUP] 
# [O.I.S.]  # [MODE1] or [MODE2]
[MODE1]:The function works all the time.
[MODE2]:The function works when the   button is pressed. We recommend 
using this mode when you are recording yourself or recording wi th a tripod 
in Still Picture Recording Mode.
AF/AE tracking
MENU


A Target frame 
						

							- 56 -
≥This function cannot be used in Manual Mode. In Still Picture R ecording Mode, it can only be 
used with some settings in Scene Mode.
≥ It may track different objects or may not lock the target depen ding on the recording conditions 
such as the following:
j When the object is too large or too small
j When color of the object is similar to the background
j When the scene is dark
≥ When the target is locked in Still Picture Recording Mode, the  screen may become dark.
≥ If you use the Fade function while the target is locked, the ta rget lock will be canceled. (l59)
≥ AF/AE tracking will be canceled in the following cases.
jWhen the unit is turned off
j Press the recording/playback button
j Touch the recording mode switching icon
j Touch the Recording Mode button icon
j Switch to recording of yourself
In Motion Picture Recording Mode, you can further improve optical image stabilization by 
touching and holding  . With this function, you can further redu ce the effects of the 
shake that tends to occur when using zoom.
1 Touch   to turn the Image Stabilizer on. ( l54)
2 Touch and hold  .
≥Icon is displayed in  A while you are touching and holding  .
≥ Optical Image Stabilizer Lock is released when you remove your  finger from the icon.
Optical Image Stabilizer Lock
 
						

							- 57 -
∫
To make the display of   disappear
Display of   will not disappear even when no operation is performed for specific time with the 
default setting. To make the display of   disappear, change the  setting of the [O.I.S. LOCK 
DISPLAY].
≥ Stabilization may not be possible under strong shaking conditio ns.
≥ To record while moving the uni t quickly, release Optical Image  Stabilizer Lock.
It is possible to focus and record a still picture of a subject  that is touched.
1To u c h   .≥An icon is displayed  A.2Touch the subject.≥Focus area is displayed at the touched position, and a 
still picture is recorded.
≥Depending on the recording conditions or recognition of the tou ched position, it may not be 
possible to record the intended picture.
≥ This will not operate for recording yourself. : [SETUP] 
# [O.I.S. LOCK DISPLAY]  # desired setting
[ON]:Constantly display.
[OFF]:The icon will disappear after approx. 5 seconds without any touc h operation.
Touch Shutter
MENU
 
						

							- 58 -
Select the operation icons to add different effects to the images to be recorded.
1Touch   (left side)/  (right side) of   on the Touch Menu to displ ay the 
operation icons. ( l18)
2Touch an operation icon.(e.g. PRE-REC)
≥ The operation icons that are displayed in the Touch 
Menu can be changed.
([SELECT OPERATION ICONS]:  l33)
≥ Select the operation icon again to cancel the function.
Refer to the respective pages for canceling the following 
functions.
jSelf-timer ( l60)
j Guidelines ( l61)
≥ The icon is displayed when the operation icon is set.
Operation icons
*1 Not displayed in Still Picture Recording Mode.
*2 Not displayed in Motion Picture Recording Mode.
≥If you turn off the unit or press the recording/playback button ,
PRE-REC, Backlight Compensation,  Night Mode, Self-timer and Tele Macro functions are 
canceled.
≥ If you turn off the unit, the  Fade function is canceled.
≥ It is possible to set from the menu.
Advanced (Recording)
Recording functions of operation 
icons
PRE-REC
Fade*1
Intelligent Contrast Control*1
PRE-REC*1
Self-timer*2
Intelligent Exposure*2
Backlight Compensation
Te l e   M a c r o
Guidelines
Night Mode
*1 
						

							- 59 -
When you start recording, the image/audio gradually 
appears. (Fade in)
When you pause recording, the image/audio gradually 
disappears. (Fade out)
≥The Fade setting is canceled when the recording stops.
∫ To select the color for fade in/out
≥The thumbnails of scenes recorded using fade in become black (o r white).
This brightens parts that are in shadow and difficult to see an d suppresses white saturation 
in bright parts at the same time. Both bright and dark parts ca n be recorded clearly.
≥If there are extremely dark or bright parts or the brightness i s insufficient, the effect may not be 
clear.
Fade
: [RECORD SETUP]  # [FADE COLOR]  # 
[WHITE] or [BLACK]
Intelligent Contrast Control
(Fade in)
(Fade out)
MENU 
						

							- 60 -
This allows recording of the pictures and sound to start approximately 3 seconds before the 
recording start/stop button is pressed.
≥  appears on the screen.
≥Aim the unit at the subject beforehand.
≥ There is no beep sound.
≥ PRE-REC is canceled in the following cases.
jPress the recording/playback button
j Touch the recording mode switching icon
j If you remove the SD card
j If you touch 
j If you press 
the Wi-Fi button
j If you turn the unit off
j If you start recording
j After 3 hours have passed
≥
After setting PRE-REC, if recording starts in less than 3 secon ds, motion pictures taken 
3 seconds before pressing the recording start/stop button canno t be recorded.
≥Images displayed on the thumbnail in Playback Mode will differ  from the motion pictures 
displayed at the start of playback.
This is for recording still pictures using the timer.
Each time the icon is selected, the indication changes by one s etting in the following order:
Ø 10 (Records after 10 seconds)  # Ø2 (Records after 2 seconds)  # setting canceled
≥ When you press the   button,  Ø10 or Ø2 flashes for the set period before a still picture is 
recorded. After recording, the Self-timer is canceled.
≥ In Auto Focus Mode, if the   button is pressed halfway once and  then fully, the lens focuses 
on the subject when the button is pressed halfway. If the   butt on is pressed fully all at once, 
the lens focuses on the subject just before recording.
To stop the timer midway throughTouch [CANCEL].
≥ Setting the Self-timer to  Ø2 is a good way to prevent image shake when the   button is 
pressed while using a tripod etc.
This brightens dark areas so the image can be recorded clearly.
≥ If there are extremely dark parts or the brightness is insuffic ient, the effect may not be clear.
PRE-RECThis prevents you from missing a shot.
Self-timer
Intelligent Exposure
PRE-REC
MENU